• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.359-365
• /
• 2008

As housing supply ratio has become over 100%, the strategic vision of government's policies has been changed from new construction to maintenance and regeneration of old architectural-structures. This fact has brought a light on the reconstruction and remodeling industries and a need for retrofit and rehabilitation techniques of existing foundation. Various methods of foundation for architectural-structures do exist. Among them, micropiling technologies are increasingly applied in foundation rehabilitation and seismic retrofitting projects. Micropiling techniques provide environmental-friendly methods for minimizing disturbance to adjacent structures, ground, and the environment. The installation is possible in restrictive area and general ground conditions. The fact that the installation procedures cause minimal vibration and noise and require very low ceiling height makes the micropiling methods to be commonly used for underpin existing structures. Specialized drilling equipment is often required to install the micropiles for existing basement facilities. This paper presents a case study in which micropiles were constructed to support a superstructure for vertical extension of existing elevator core and provide accessibility to underground parking lot. It is intended to become useful reference for the similar remodeling project.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.852-857
• /
• 2003

This paper has the object of investigating natural frequencies of thick plates on inhomogeneous Pasternak foundation by means of finite element method and providing kinematic design data lot mat of building structures. This analysis was applied for design of substructure on elastic foundation. Mat of building structure may be consisdered as a thick plate on elastic foundation. Recently, as size of building structure becomes larger, mat area of building structure also tend to become target and building structure is supported on inhomogeneous foundation. In this paper, vibration analysis or rectangular thick plate is done by use or serendipity finite element with 8 nodes by considering shearing strain of plate. The solutions of this paper are compared with existing solutions and finite element solutions with 4${\times}$4 meshes of this analysis are shown the error of maximum 0.083% about the existing solutions. It is shown that natrural frequencies depend on not only Winkler foundation parameter but also shear foundation parameter.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.514-519
• /
• 2006

The purpose of this study is to evaluate the performance of existing bridge foundation reinforced by battered micropiles. In order to do numerical method using a Finite element program was used to predict the micropile behavior and quantify their reinforcing effect to existing bridge foundations. In addition, effect of battered micropiles on existing foundations was compared with vertically reinforced bridge foundations. Based on the study performed, it was found that the use of battered micropile is more efficiently reducing displacement of existing foundation than vertically installed micropiles under vertical and horizontal loadings respectively. The batter angle of micropile was also found effective about $15^{\circ}\sim20^{\circ}$ to reduce the vortical displacement. The horizontal reinforcement effect is continuously larger with an increase in batter angle. So, it is believed that the results presented could give an idea to enhance in-service performance of existing bridge foundations reinforced by micropiles.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.15-24
• /
• 2021

Recently, cases for inevitable adjacent construction are increasing due to the limited spaces in urban area. When a new structure is constructed near an existing structure, interference effects induced by the pre-existing structure should be considered. Thus, numbers of studies have been conducted to investigate the effects of adjacent construction, while laboratory scales studies are not well reported. In this study, laboratory scale experiments have been conducted to investigate the bearing capacity and settlement variations with different adjacent construction cases. Results show an optimistic ground bearing capacity increase of the new foundation structure due to the existing foundation structure, while concerns on the increased settlement of the pre-existing structure. Thus, both bearing capacity of the new foundation structure and subsequent settlement of the existing foundation structure have to be considered when assessing the technical applicability of adjacent structure construction on site.

• Journal of the Korean Professional Engineers Association
• /
• v.37 no.3
• /
• pp.50-53
• /
• 2004

JSP(Jumbo Super Pile) method is a foundation treatment of mixing in depth, one of the soft ground improvement methods through which settlement and deformation of ground foundation is prevented. An example of this method which is applied for the foundation design of a new drainage pumping station is Introduced, and another applied example for an existing pumping station which is built on soft foundation is also introduced.

• Coupled systems mechanics
• /
• v.9 no.5
• /
• pp.473-498
• /
• 2020

This paper presents a careful theoretical investigation into interfacial stresses in reinforced concrete foundation beam repairing with composite plate. The essential issue in the analysis of reinforced structures with composite materials is to understand the individual behaviour of each material and its interaction with the remaining ones. The present model is based on equilibrium and deformations compatibility requirements in and all parts of the repaired RC foundation beam, i.e., the reinforced concrete foundation beam, the composite plate and the adhesive layer. The theoretical predictions are compared with other existing solutions, By comparisons between the existing solutions and the present new solution enable a clear appreciation of the effects of various parameters such as the geometric characteristics and mechanical properties of the components of the repaired beam, as well as the geotechnical stresses of the soil are considered. This research is helpful for the understanding on mechanical behaviour of the interface and design of the composite-concrete hybrid structures.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.87-95
• /
• 2014

Recently, there are increasing technical needs for foundation retrofit project such as vertical extension of apartment building. This paper focuses on the load distribution characteristics of existing and reinforcing piles when reinforcing pile is installed to the existing foundation. Allowable bearing load was initially applied on the foundation slab supported with four existing piles and then, one reinforcing pile was installed at the center of foundation slab and additional load was applied. The experimental results showed the Load Distribution Ratio (LDR) between existing and reinforcing piles converged after the applied load exceeded allowable bearing capacity of all piles. Laboratory tests were also performed for the cases of 60 %, 80 %, 100 % unloading level of allowable bearing load. After unloading step, one reinforcing pile was installed at the center of foundation slab and additional load was applied. The results showed that reloading load level at which LDR between existing and reinforcing piles converged decreased as the amount of unloading load increased.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.819-822
• /
• 2006

This paper has the objects of deciding dynamic instability regions of thick plates on inhomogeneous Pasternak foundation by finite element method and providing kinematic design data for mats and slabs of building structures. In this paper, dynamic stability analysis of tapered opening thick plate is done by use of Serendipity finite element with 8 nodes considering shearing strain of plate. To verify this finite element method, buckling stress and natural frequencies of thick pate with or without in-plane stress are compared with existing solutions. The results are as follow that this finite element solutions with $4{\times}4$ meshes are shown the error of maximum 0.56% about existing solutions, and the larger foundation parameters, the farther dynamic instability regions are from vertical axis of graph presented relation of ${\beta}\;and\;\overline{\omega}/\omega$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.664-675
• /
• 2010

Recently environment-friendly construction method is major trend in both domestic and world constrction fields. In this paper High Functional Performance Agent(Hi-FA) which has various improved engineering characteristics different with conventional Portland cement grouting, such as high viscosity, liquidity, void filling ability, early hardening, and separation resistance, was analyzed by field and laboratory test. Also soil improvement and existing deep foundation protection works were performed and analyzed using Hi-FA.