• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.358-367
• /
• 2019

Objectives: This study aimed to review model algorithms and input parameters applied to some exposure models and to compare the simulated estimates using an exposure scenario from each model. Methods: A total of five exposure models which can estimate inhalation exposure were selected; the Korea Ministry of Environment(KMOE) exposure model, European Centre for Ecotoxicology and Toxicology of Chemicals Targeted Risk Assessment(ECETOC TRA), SprayExpo, and ConsExpo model. Algorithms and input parameters for exposure estimation were reviewed and the exposure scenario was used for comparing the modeled estimates. Results: Algorithms in each model commonly consist of the function combining physicochemical properties, use characteristics, user exposure factors, and environmental factors. The outputs including air concentration ($mg/m^3$) and inhaled dose(mg/kg/day) are estimated applying input parameters with the common factors to the algorithm. In particular, the input parameters needed to estimate are complicated among the models and models need more individual input parameters in addition to common factors. In case of CEM, it can be obtained more detailed exposure estimates separating user's breathing zone(near-field) and those at influencing zone(far-field) by two-box model. The modeled exposure estimates using the exposure scenario were similar between the models; they were ranged from 0.82 to $1.38mg/m^3$ for concentration and from 0.015 to 0.180 mg/kg/day for inhaled dose, respectively. Conclusions: Modeling technique can be used for a useful tool in the process of exposure assessment if the exposure data are scarce, but it is necessary to consider proper input parameters and exposure scenario which can affect the real exposure conditions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.219-228
• /
• 2014

Objectives: The major objective of this study was to develop a tier 2 exposure model combining tier 1 exposure model estimates and worker monitoring data and suggesting narrower exposure ranges than tier 1 results. Methods: Bayesian statistics were used to develop a tier 2 exposure model as was done for the European Union (EU) tier 2 exposure models, for example Advanced REACH Tools (ART) and Stoffenmanager. Bayesian statistics required a prior and data to calculate the posterior results. In this model, tier 1 estimated serving as a prior and worker exposure monitoring data at the worksite of interest were entered as data. The calculation of Bayesian statistics requires integration over a range, which were performed using a Riemann sum algorithm. From the calculated exposure estimates, 95% range was extracted. These algorithm have been realized on Excel spreadsheet for convenience and easy access. Some fail-proof features such as locking the spreadsheet were added in order to prevent errors or miscalculations derived from careless usage of the file. Results: The tier 2 exposure model was successfully built on a separate Excel spreadsheet in the same file containing tier 1 exposure model. To utilize the model, exposure range needs to be estimated from tier 1 model and worker monitoring data, at least one input are required. Conclusions: The developed tier 2 exposure model can help industrial hygienists obtain a narrow range of worker exposure level to a chemical by reflecting a certain set of job characteristics.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.4
• /
• pp.255-269
• /
• 2003

The objective of this study was to estimate human exposure to benzo (a)pyrene through multimedia/multi-pathway exposure scenario. The human exposure scenario for benzo(a)pyrene was consisted of 12 multiple exposure pathways, and the multipathway human exposure model based on this scenario constituted. In this study, the multipathway human exposure model was used to estimate the concentrations in the exposure contact media, human intake factors and lifetime average daily dose (LAD $D_{model}$) of benzo(a)pyrene in the environment. Sensitivity analysis was performed to identify the important parameters and Monte-Carlo simulation was undertaken to examine the uncertainty of the model. The total LAD $D_{model}$ was estimated to be 5.52${\times}$10$^{-7}$ mg/kg-day (2.06${\times}$10$^{-7}$ -8.65${\times}$10$^{-7}$ mg/kg-day) using the multipathway human exposure model. The inhalation dose accounted for 78% of the total LADD, whereas ingestion and dermal contact intake accounted for 20.2% and 1.8% of the total exposure, respectively. Based on the sensitivity analysis, the most significant contributing input parameter was benzo (a)pyrene concentration of ambient air. Consequently, exposure via inhalation in outdoor/indoor air was the highest compared with the exposure via other medium/pathways.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.208-218
• /
• 2014

Objectives: The major objective of this study was to develop and validate a tier 1 exposure model utilizing worker exposure monitoring data and characteristics of worker activities routinely performed at construction sites, in order to estimate worker exposures without sampling. Methods: The Registration, Evaluation, Authorization and Restriction of Chemicals(REACH) system of the European Union(EU) allows the usage of exposure models for anticipating chemical exposure of manufacturing workers and consumers. Several exposure models have been developed such as Advanced REACH Tools(ART). The ART model is based on structured subjective assessment model. Using the same framework, a tier 1 exposure model has been developed. Worker activities at construction sites have been analyzed and modifying factors have been assigned for each activity. Korean Occupational Safety and Health Agency(KOSHA) accrued work exposure monitoring data for the last 10 years, which were retrieved and converted into exposure scores. A separate set of sampling data were collected to validate the developed exposure model. These algorithm have been realized on Excel spreadsheet for convenience and easy access. Results: The correlation coefficient of the developed model between exposure scores and monitoring data was 0.36, which is smaller than those of EU models(0.6~0.7). One of the main reasons explaining the discrepancy is poor description on worker activities in KOSHA database. Conclusions: The developed tier 1 exposure model can help industrial hygienists judge whether or not air sampling is required or not.

• Journal of Environmental Health Sciences
• /
• v.50 no.1
• /
• pp.43-53
• /
• 2024

Background: Exposure assessment is an important part of risk assessment for consumer products. Exposure models are used when estimating consumer exposures by considering exposure routes, subjects, and circumstances. These models differ based on their tiers, types, and target populations. Consequently, exposure estimates may vary between models. Objectives: This study aimed to compare the results of different exposure models using identical exposure factors. Methods: Chemical exposure from consumer products was calculated using four consumer exposure assessment models: Targeted Risk Assessment 3.1, Consumer Exposure Model 2.1 (CEM), ConsExpo web 1.1.1, and the Korean Exposure Algorithm (primary and detailed) issued by the Ministry of Environment, No. 972 (MOE). The same exposure factors were used in each model to calculate inhalation and dermal exposures to acetaldehyde, d-limonene, and naphthalene in all-purpose cleaners, leather coating sprays, and sealants. Results: In the results, TRA provided the highest estimate. Generally, MOE (detailed), CEM and ConsExpo showed lower exposures. The inhalation exposure for leather coating spray showed the largest differences between models, with differences reaching up to 1.2×10⁷ times. Since identical inputs were used for the calculations, it is likely that the models significantly influenced the estimated results. Conclusions: Despite using the same exposure factors to calculate dermal and inhalation exposures, the results varied substantially based on the model's exposure algorithm. Therefore, selecting an exposure model for assessing consumer products should be done with careful consideration.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.6-11
• /
• 2010

Embodying the safety of radioactive waste disposal requires the relevant safety criteria and the corresponding stylized methods to demonstrate its compliance with the criteria. This paper proposes a conceptual model of risk-based safety evaluation for integrating complex potential radiation exposure situations in radioactive waste disposal. For demonstrating compliance with a risk constraint, the approach deals with important exposure scenarios from the viewpoint of the receptor to estimate the resulting risk. For respective exposure situations, it considers the occurrence probabilities of the relevant exposure scenarios as their probability of giving rise to doses to estimate the total risk to a representative person by aggregating the respective risks. In this model, an exposure scenario is simply constructed with three components:radionuclide release, radionuclide migration and environment contamination, and interaction between the contaminated media and the receptor. A set of exposure scenarios and the representative person are established from reasonable combinations of the components, based on a balance of their occurrence probabilities and the consequences. In addition, the probability of an exposure scenario is estimated on the assumption that the initiating external factors influence release mechanisms and transport pathways, and its effect on the interaction between the environment and the receptor may be covered in terms of the representative person. This integrated approach enables a systematic risk assessment for complex exposure situations of radioactive waste disposal and facilitates the evaluation of compliance with risk constraints.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.3
• /
• pp.251-258
• /
• 2001

Indoor and outdoor nitrogen dioxide(NO$_2$) concentrations of 122 houses were measured and compared with measurements of personal NO$_2$ exposure simultaneously . Time activity patterns were used to determine the impacts on NO$_2$ exposure assessment and time weighed average model to estimate the personal NO$_2$ exposure. Most people spent their times more than 80% of indoor and more than 50% in home, respectively. Personal NO$_2$ esposure was found to be significantly associated with both indoor NO$_2$ concentration(r=0.70) and outdoor NO$_2$ concentration (r=0.68). Using time weighted average model, personal NO$_2$ exposure was estimated with NO$_2$ measurements in indoor home, indoor workplace and outdoor home. The estimated NO$_2$ measurements were significantly correlated with measured personal exposures(r=0.69, N=122). For the difference between measured and estimated NO$_2$ exposures by multiple regression analysis showed that NO$_2$ concentrations in near workplace and other outdoors of no NO$_2$ measurements affected the personal NO$_2$ exposures(p=0.023).

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.506-514
• /
• 2006

The objectives of this study were to evaluate personal exposure estimated using a time activity pattern and microenvironmental model. The study was carried out for 44 children attending a primary school nearby the lines (school A) and 125 children attending a school away from 154 kV power lines (school B). For children attending school A, the estimated personal level was a little weak correlated with the measured level($Pearson\;r\;=0.34{\sim}0.35$). For children attending school B, the correlation was very low ($Pearson\;r\;=\;0.09{\sim}0.16$) using the TW A Model II, otherwise, TWA Model II-I which considered the average residential MF level according to the distance from the power line and home explained $39{\sim}53%$ of the correlation in MF personal exposures. The estimated personal exposure level was very well represented by the measured exposure level using TWA Model II-2 which consisted on spot and 24 h stationary measurements at subject's home ($Pearson\;r\;=\;0.65{\sim}0.85$). In conclusion, personal magnetic field expsoure estimated using a TWA Model II-2 should be provided for a reasonable estimate of measured exposure in schoolchildren living near the power line.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.123-129
• /
• 2017

This study intends examine the relevance of factors with negative influences on anti-social sexual awareness formation in adolescents as per the concern of the parents of families with adolescents, as internet pornography exposure in adolescents lead to excessive indulgence in pornographic photographs, cartoons, videos, or fictions, or in video chatting with exposure of one's own body parts. For this, the factors of internet pornography exposure in the study subjects of adolescents were constructed into a multilateral model, and the structural equation model was analyzed. As the result of the study, the following conclusion were drawn. First, the most powerful factor influencing the anti-social sexual awareness in adolescents was, contrary to the concern of many, not the exposure to pornography through internet media, but personal characteristics such as sensation-seeking tendency and socio-environmental characteristic of differential association. Second, it is worth noting that the most major factor influencing intentional internet pornography exposure by adolescents is another form of pornography exposure. Third, whether intentional or unintentional, the internet-related variable influencing the internet pornography exposure was found to be the amount of internet usage. Fourth, the unintended internet pornography exposure was found to have no direct influence on the sexual awareness of adolescents, but it did have an indirect influence on sexual awareness mediated by intentional internet pornography exposure and existing-media pornography exposure. Based on these study results, the conclusion was drawn regarding the influence of internet pornography on sexual awareness in adolescents.

• Journal of Environmental Health Sciences
• /
• v.35 no.1
• /
• pp.45-52
• /
• 2009

In recent years, pharmaceuticals in the aquatic environment have become a matter of increasing public concern. Environmental risk assessment (ERA), including an exposure assessment, is considered the best scientifically based approach for evaluating the potential effects of pharmaceuticals on ecosystems. Computerized exposure models constitute an important tool in predicting environmental exposures of pharmaceuticals. This paper presents the applicability of an exposure model by comparing measured data of selected pharmaceuticals with predicted environmental concentrations from an exposure model. $PhATE^{TM}$ (Pharmaceutical Assessment and Transport Evaluation) model developed by the Pharmaceutical Research and Manufacturers of America (PhRMA) was adapted to run simulations for the Keum River. A set of 7 pharmaceuticals of high production in Korea was modeled. The PECs generated by the $PhATE^{TM}$ model that were then compared to the measured concentrations. The $PhATE^{TM}$ model predicted concentrations for 7 pharmaceuticals including acetaminophen, acetylsalicylic acid, erythromycin, ibuprofen, lincomycin, mefenamic acid, and naproxen were in good agreement with actual measured concentrations, which demonstrated the utility of $PhATE^{TM}$ as a predictive tool. In conclusion, $PhATE^{TM}$, although it does not intend to accurately represent reality, could be utilized for rapid predictions of the environmental concentrations of pharmaceuticals.