• 한국환경과학회지
• /
• 제21권10호
• /
• pp.1265-1274
• /
• 2012

This study was conducted to investigate the extraction characteristics including total polyphenol compound content (TPC) and the antioxidative effect of Rumex crispus root extract on commercial corn oil. Extraction yield was increased with extraction temperature but decreased with extraction ratio. No significant differences in aromatics content were found among the extracts prepared with various extraction conditions; extraction ratio, extraction temperature, extraction pH and composition of extractant. Total flavonoid content of the extract was increased with extraction temperature and extraction pH, and highest value of it was found when extractant composition of ethanol in water was 75%. Total polyphenol compound content (TPC) of the extract with 10 fold extraction ratio showed the highest value, but no significant difference in TPC was found with extraction temperature. Reducing power and DPPH (${\alpha}$,${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) radical scavenging ability (RSA) of the extract in spectrophotometric absorbance were decreased with extraction ratio but increased with extraction temperature and showed 63.1%~98.4% and 67.6%~86.7% of those of ascorbic acid in reducing power and DPPH RSA, respectively. The antioxidative effects of the extract on corn oil were 84.8~93.0% of that of commercial butylated hydroxytoluene, the antioxidant index value was highest when the ethanol composition to water in extractant was equal ratio.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.542-547
• /
• 2017

초음파 추출법(Ultrasonic-assisted extraction, UAE)은 기존의 추출법 대비 높은 추출 효율과 짧은 추출시간으로 식물 세포벽으로부터 생리활성물질 추출 또는 분리에 효과적인 방법으로 인식되어 관심이 증대되고 있다. 본 연구에서는 탈지미세조류(Tetraselmis KCTC 12236BP)에서 폴리페놀 추출을 위해 UAE를 적용하여 총 폴리페놀(TPC) 생산에 미치는 주요 추출변수의 영향을 평가하였다. 추출변수의 최적화를 위해 입자크기, 고액비(L/S ratio), 에탄올 농도, 추출 온도 및 추출 시간을 요인으로 하여 순차적인 최적화를 진행하였다. 실험에 적용 된 모든 변수는 TPC 추출에 유의한 효과를 보였으며 추출 온도가 TPC생산에 가장 큰 영향을 미침을 확인 할 수 있었다. 최적 추출조건은 혼합 입자 사용 시, 10% 고액비, 60% 에탄올, 추출온도 $100^{\circ}C$와 추출시간 30 분을 적용한 추출에서 8.7 mg GAE/g DW를 얻을 수 있었다. 동일한 추출조건에서 열수추출과 UAE를 비교하였을 때 UAE에서 TPC 추출이 1.8배 증가함을 확인하였다. 본 연구를 통해 저온 및 짧은 추출시간을 적용한UAE가 기존의 열수추출 공정에 비해 LEA를 이용한 생리활성물질 생산에 보다 효과적임을 확인하였다.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.371-377
• /
• 1999

The effects of benzamidoxime concentration, solvents and temperature on the degree of metal extraction were investigated to apply benzamidoxime to heavy metal extraction as chelating agent. Benzamidoxime was synthesized from benzonitrile with hydroxylamine. The chemical structure of benzamidoxime was identified. The degree of heavy metal extraction was increased with increasing the concentration of benzamidoxime and decreasing the extraction temperature. Benzamidoxime was found to be an concentration of benzamidoxime and decreasing the extraction temperature. Benzamidoxime was found to be an effective extractant for Cu-extraction by benzene or chloroform. The relationship between the thermodynamic overall equilibrium constant and absolute temperature was expressed as log K = -5.56 ＋ $855T^{-1}$. Heat of extraction, $$\Delta$H^0$ were calculated from overall equilibrium constants at various temperature and the extraction reactionby benzamidoxime was found to be exthothermic.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.10-17
• /
• 1997

The study was performed to obtain the optimum extraction conditions for crocin from gardenia fructus. Generally crocin is unstable on heat, light, acid and base solution. The extraction efficiency of crocin from gardenia depended upon the extraction time, extraction temperature, pH in the extraction bath and the optimum conditions of crocin extraction were determined as 60 minutes of extraction time, 4$0^{\circ}C$ of extraction temperature, pH 7 of extraction bath. The molar extinction coefficient of crocin was 12,515 and the color yield of purified crocin was about six times higher than that of non-purified crocin. The heat-stability at extraction temperature and lightstability in irradiation with xenon lamp for one hour of the purified crocin were higher than those of non-purified crocin. Intensity of &{\lambda}_{max}&of crocin was decreased by irradiation for one hour but UV-Vis. spectra of crocin was not changed. The colors of purified and non-purified crocin dissolved wit methanol was evaluated by means of CIE L* a* b* system.

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.860-865
• /
• 1997

Investigations were performed on the effects of extraction temperature, pressure, time on solubility and selectivity of egg yolk lipid and cholesterol, and color and fatty acid composition of the residue in supercritical carbon dioxide(SC-Co$_2$) extraction. Lipid and cholesterol solubility increased as the increase of Co$_2$ density and was found to strongly depend on the extraction pressure rather than the extraction temperature. The relative concentration of cholesterol in the extract increased with an increase in temperature and decreased with an increase in pressure and extraction time. extraction of dried eg yolk for 3hr at 4$0^{\circ}C$/276 bar removed 46.1% of cholesterol from the residual egg yolk with a yield of 63.2%. SC-Co$_2$ extraction produced a lighter color egg yolk with less redness and yellowness. As the extraction time increased, the resultant residual egg yolk became more saturated with fatty acids. SC-$CO_2$ extraction offers a safe, natural method for removing cholesterol from dried egg yolk.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1515-1518
• /
• 2009

The objective of this study was to compare 3 extraction methods including, solid phase extraction (SPE), acetonitrile extraction, and methanol extraction, for their usefulness as extraction methods to determine capsaicinoids. The determination of capsaicinoids in the extracts was carried out on a reverse-phased high performance liquid chromatography (HPLC) using a fluorescence detector. Three extraction methods, i.e., SPE, acetonitrile extraction, and methanol extraction were compared for the quantification of capsaicinoids using raw peppers and pepper powder. The highest analytical values were observed using methanol extraction and the lowest values using SPE. Also, the analytical method validation parameters such as accuracy, precision, limit of detection, limit of quantitation, and specificity were calculated to ensure the method's validity. This method provides a fast and accurate approach for the determination of capsaicinoids in peppers.

• KSBB Journal
• /
• 제26권5호
• /
• pp.453-458
• /
• 2011

In this study, two different extraction techniques, organic solvent extraction and supercritical carbon dioxide ($SCCO_2$) extraction, were employed to evaluate the extraction efficiency of oil from Chlorella vulgaris. In the organic solvent extraction, the effects of various organic solvent on the extraction yield were investigated. The $SCCO_2$ extraction was carried out while varying such operating parameters as temperature, pressure, $SCCO_2$ flow rate, and cosolvent. About 4.9 wt% of oil was extracted from ground Chrollera vulgaris for 18 h when dichloromethane/methanol (2：1, v/v) was used as an extraction solvent. The oil yield of the $SCCO_2$ extraction was found to be very low (0.53 wt%) and to increase up to about 0.86 wt% with the addition of cosolvent.

• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• 경영과학
• /
• 제20권2호
• /
• pp.1-16
• /
• 2003

Previous research on data extraction and integration for data warehousing has concentrated mainly on the relational DBMS or partly on the object-oriented DBMS. Mostly, it describes issues related with the change data (deltas) capture and the incremental update by using the triggering technique of active database systems. But, little attention has been paid to data extraction approaches from other types of source systems like hierarchical DBMS, etc. and from source systems without triggering capability. This paper argues, from the practical point of view, that we need to consider not only the types of information sources and capabilities of ETT tools but also other factors of source systems such as operational characteristics (i.e., whether they support DBMS log, user log or no log, timestamp), and DBMS characteristics (i.e., whether they have the triggering capability or not, etc), in order to find out appropriate data extraction techniques that could be applied to different source systems. Having applied several different data extraction techniques (e.g., DBMS log, user log, triggering, timestamp-based extraction, file comparison) to S bank's source systems (e.g., IMS, DB2, ORACLE, and SAM file), we discovered that data extraction techniques available in a commercial ETT tool do not completely support data extraction from the DBMS log of IMS system. For such IMS systems, a new date extraction technique is proposed which first creates Index database and then updates the data warehouse using the Index database. We illustrates this technique using an example application.

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.47-55
• /
• 1993

This study was designed to recognize the factors which can affect the normal eruption of the lower third molar and the eruption rate of the lower third molar in the cases of non-extraction and the extraction of first premolar. The sample consisted of 214 cases of extraction of first premolar and 119 cases of non-extraction, and all of these cases were divided into erupted and impacted lower third molar groups and were analized according to the pantomogram. The results of the study were as follows : 1. The eruption rate of the touter third molar was $54.67\%$ in the group of extraction of the first premolar and $35.29\%$ in the non-extraction group. 2. The early inclination of the erupting lower third molar has significant effect in the eruption of it. 3. In the orthodontic treatment, the extraction of first premolar is one of the factors infuencing the nomal eruption of lower third molar. 4. The available space for the normal enruption of lower third molar was greater in first premolar extraction case than in non-extraction case.