• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.248-253
• /
• 2006

For the determination of vitamin I using high performance liquid chromatography (HPLC), the most critical and time consuming step is the Quantitative extraction of all vitamin E homologs from sample matrix. Three different extraction methods were compared to determine vitamin E in grains. Saponification used alkaline hydrolysis followed by solvent extraction. Direct solvent extraction included dispersing the samples in hot water, addition of isopropanol and $MgSO_4$, and extraction of the analytes with extracting solvent with Polytron homogenization. Using Soxhlet extraction, the samples were extracted in a Soxhlet apparatus with hexane containing butylated hydroxytoluene (BHT). Vitamin E content in 14 grains were analyzed and compared by three different extraction methods. Generally, the highest values were observed from direct solvent extraction and Soxhlet extraction followed by saponification. a-Tocopherol equivalent (a-TE) levels in grains ranged from 0.32 a-TE/100 g in prosomillet to 5.12 a-TE/100 g in black rice.

• Journal of Pharmacopuncture
• /
• v.21 no.2
• /
• pp.48-60
• /
• 2018

Objective: The aim of this study is to optimize the extraction of beneficial substance from Cudrania tricuspidata leaves grown at Jirisan Mountain in South Korea by three different solvents depending on extraction time and at different temperature. Methods: The total phenolic contents were determined by the method reported by $S{\acute{a}}nchez$-Moreno et al. The total flavonoid contents were analyzed by Slinkard and Singleton. The DPPH radical scavenging activity was determined according to the method reported by Blois Results: The extraction yield for each solvent is 9.05-14.1%, 2.17-5.67%, and 2.3-3.9% for D.W., ethanol, and hexane, respectively. The overall results were maximized for the extract obtained with D.W. for 5 min at $100^{\circ}C$. The average phenol contents were 77.11, 45.64, and 0.343 mg/g at $100^{\circ}C$ in water, $78^{\circ}C$ in ethanol, and $68^{\circ}C$ in hexane, respectively. The flavonoid contents were the highest in the materials extracted with D.W., and were increased with increasing temperature, regardless of the extraction solvents, whether water (green), polar organic ethanol, or nonpolar organic hexane. In the ethanol extract, the flavonoid contents are increased gradually from 5.66 mg/g to 7.73 mg/g. The total flavonoid contents were proportional to the concentrations of the water extracts, ranging from 4.14 mg/g to 48.89 mg/g. The antioxidative activities of the water-extracted compounds are generally increased with increasing temperature from 42.5% to 85.5%. Those of the hexane extracts are increased slowly from 3.79% to 8.8%, while those of ethanol extracts are increased from 29.8% to 47.4%. Conclusion: The extraction yields were dependent upon solvents for extraction as well as extraction time and the temperature. The optimal extraction time was 5 min and the extraction yields were increased with increasing temperature excepted hexane. Of the three tested extraction solvents, the greenest solvent of water shows excellent results, suggesting that water is among the most effective solvents for natural sample extractions for general medicinal, pharmaceutical, and food applications.

• Herbal Formula Science
• /
• v.18 no.2
• /
• pp.125-134
• /
• 2010

Objectives : This study was performed to compare the differences between decoctions extracted by different extraction conditions. Methods : Two different decoctions were prepared with pressured or non-pressured extraction conditions for 60, 120 and 180min. The yields of extracts, sugar contents, hydrogen ion concentrations(pH), the contents of reference compounds and individual preferences on Ssanghwa-tang(Shuanghe-tang) were investigated. Results : As extraction time increased, individual preferences for decoctions by pressured extraction tended to increase more than those by non-pressured extraction, and the yields and sugar contents of both decoctions showed the tendency of increase. The pH values of decoctions in pressured conditions were lower than those in non-pressured conditions in all extraction times and both extraction conditions showed decreasing pH values according to increase of extraction times. Of the reference compounds, paeoniflorin showed higher contents in non-pressured conditions than in pressured conditions and the contents of cinnamaldehyde were always lower in non-pressured conditions than in pressured conditions at all time. Conclusions : The decoctions of Ssanghwa-tang(Shuanghe-tang) extracted by pressured or non-pressured extraction for 60, 120, 180min exhibited different individual preferences, yields of extracts, sugar contents, pH, reference compounds contents.

• Herbal Formula Science
• /
• v.22 no.2
• /
• pp.15-24
• /
• 2014

Objectives : Gwakhyangjeonggi-san (GJS) which consists of 13 herbal medicines has been used to treat gastrointestinal disorders caused by common cold. This study was performed to compare GJS decoctions produced using different pressure levels for various extraction times. Methods : Decoctions were prepared by the pressure levels of $0kgf/cm^2$ (non-pressurized) or $1kgf/cm^2$ (pressurized) for 30-180 min. The extraction yield, total soluble solid content (TSSC), and hydrogen ion concentration (pH) were measured, and the contents of the nine marker compounds were determined using high performance liquid chromatography. Results : The higher pressure and longer extraction time significantly increased TSSC value, while decreased the pH value. However, only extraction time affected the extraction yield of pressurized decoction. Variation of the amounts of chemical compounds was shown in pressurized and non-pressurized decoctions during extraction time. The result of regression analysis showed that pressure and extraction time can influence to extraction yield, TSSC, pH, and the content of chemical compounds. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GJS decoctions.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.437-442
• /
• 2010

The objective of this study was to investigate the effect of ultrasound on the extraction of oil from canola seeds when supercritical carbon dioxide ($SCCO_2$) was used as an extraction solvent. The ultrasound-assisted $SCCO_2$ extraction were carried out while varying such operating parameters as particle size of crushed canola seed, flow rate of $SCCO_2$, aspect ratio of the extraction vessel, and ultrasound power. The extraction rate decreased with increasing particle size of samples, showing a maximun at a $CO_2$ flow rate of 6.2 L/min. Both the extraction rate and extraction yield increased with a decrease in the aspect ratio of the extraction vessel. For the ultrasoundassisted $SCCO_2$ extraction, the extraction yield was slightly increased when the $CO_2$ flow rate was below 6 mL/min with sample A and B.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.1
• /
• pp.42-46
• /
• 2012

The ISO document of ISO/TC/190/SC3/WG11/N11 is a working draft of international standard (WD) dealing with analytical method for the determination of explosives and related compounds using high performance liquid chromatography. The scope of this WD covers the storage of samples, preparing test portion, extraction and instrumentation. The main purpose of this study was to improve the extraction conditions which were already adopted in the WD. For this purpose, mechanical shaking method could be corresponded up to 18 hours of ultrasonic bath extraction in the WD was tested. Methanol was also tested with the intention of being added as an extracting solvent other than acetonitrile in the WD. According to the results, 16 hours of mechanical shaking method showed statistically the same effectiveness as that of 18 hours of ultrasonic bath extraction. In case of extracting solvent, methanol also showed statistically the same extraction capability as acetonitrile for DNB, TNT, 2-A-DNT and 2,4-DNT. However, the recovery rate of TNB with methanol extraction was 40% higher than that of acetonitrile extraction. Through adding mechanical shaking method into committee draft (cf. the next stage draft of the WD during the process for making international standard), ISO standard of analyzing explosives and related compounds in soil would become more useful in dealing with huge number of field samples in the laboratory. In other aspect, adopting methanol as an alternative extracting solvent would be very effective in the terms of exchangeability with GC-ECD/MS method which is being developed by German experts.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.787-798
• /
• 2005

The objectives of this study were to assess extraction kinetics of heavy metals with extraction times and to assess extraction efficiencies of heavy metals with concentrations and kinds of washing solutions. Target materials were obtained from disused metal mines. Washing solutions were water, HCl(0.1, 0.3, 1.0 N), EDTA(0.01, 0.05, 0.1 M), and sodium dodecyl sulfate(SDS, 0.1. 0.5, 1.0%). Extraction efficiencies of heavy metals by water and SDS were below 1%, and extraction efficiencies of Zn and Cd were higher than those of Pb and Cu. As results, water and SDS were not effective in extracting heavy metals from mine tailings as washing solution, but extraction efficiencies of Pb and Cu with SDS solution increased as extraction time increased. Extraction kinetics of heavy metals with HCl and EDTA were faster than those with water and SDS. The majority of heavy metals were extracted within 6 hours, and extraction kinetics was almost independent of the solution concentration. Extraction kinetics of heavy metals after 6 hours was slow, but extraction kinetics was dependent on the solution concentration. Also, as concentrations of HCl and EDTA solution were stronger, heavy metals were extracted rapidly and extraction efficiencies were increased. The extraction efficiency was high in order of Cd>Pb>Zn>Cu in using 1.0 N HCl, and Pb>Cd>Zn>Cu in using 0.1 M EDTA. Consequently, extraction effectiveness was highest for Pb in using HCl, and for Pb and Cd in using EDTA with concentration increase. Extraction time of over 6 hours was not effective in extracting heavy metals.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.2
• /
• pp.113-118
• /
• 2013

In this study, silk sericin films were prepared using different extraction methods, and the molecular conformation of sericin was examined using Fourier-transform infrared spectroscopy with attenuated total reflection geometry. Additionally, the effect of the film side (air-facing side or plate-facing side) on the molecular conformation of the sericin films was investigated. Interestingly, the molecular conformation of the sericin film depended on the film side. The molecular conformation of air-facing side of the sericin film was significantly influenced by extraction solution and time. The ${\beta}$-sheet crystallization and the crystallinity index of the sericin film markedly increased with an increase in the extraction time in hot water. The order of the crystallinity indices for the sericin films obtained with different extraction solutions was as follows: citric acid solution > urea solution >> hot water. In contrast, no remarkable differences were observed in the molecular conformation of the plate-facing side of the sericin film after extraction in hot water for different time periods. Urea and citric acid solution extractions showed remarkably higher crystallinity indices for sericin than those obtained after hot water extraction. However, no significant differences were observed in the crystallinity index of sericin between urea and citric acid solution extraction in plate-facing side of the film.

• KSBB Journal
• /
• v.25 no.4
• /
• pp.371-378
• /
• 2010

For the biodiesel fuel production from microalgae, the lipid from wet and dry samples of green algae Scenedesmus sp. was extracted by using various solvents and pre-treatment methods. Extraction yield of the lyophilized sample was better than that of dry sample. Chloroform/methanol (2:1, v/v) and ultrasonication or homogenization method were also selected as the most effective solvent and pre-treatment methods for lipid extraction, respectively. Under these constraint conditions, optimization experiment of lipid extraction was investigated by Taguchi approach using orthogonal matrix $L_9$ ($3^4$) method. The optimum extraction conditions of lipid extraction was obtained at pre-treatment of homogenization, extraction time of 5 hour, temperature of $35^{\circ}C$, and solvent ratio of 1:20 (w/v). Yield of extraction at optimized condition was 20.55% and it was 96% of total lipid content (21.38%) of Scenedesmus sp.

• Korean Journal of Clinical Laboratory Science
• /
• v.40 no.2
• /
• pp.113-117
• /
• 2008

It designed a study to examine the efficiency of DNA and RNA extraction from archival formalin-fixed, paraffin-embedded tissues using an non-heating and heating method. Archival paraffin blocks of liver, kidney, colon were randomly selected. Each paraffin block was prepared in 20 microtubes. For each paraffin blocks were tested non-heating DNA extraction to 10 microtubes and heating protocol under pH 7.0 and $100^{\circ}C$ to 10 microtubes. Evaluation of the results of DNA extraction was carried out by measuring concentration by UV spectrophotometry and then PCR amplification. DNA extraction content that non-heating method was liver $5{\pm}0.7{\mu}g/mL$, kidney $2{\pm}0.3{\mu}g/mL$, colon $6{\pm}0.4{\mu}g/mL$ and heating method was liver $12{\pm}0.6{\mu}g/mL$, kidney $7{\pm}0.5{\mu}g/mL$, colon $10.{\pm}0.3{\mu}g/mL$. Successful RNA extraction was observed, by ${\beta}$-actin amplification, in 46.7% sections for samples treated by the heating method versus 30.0% using non-heating DNA extraction. The extracted nucleic acid showed better values for samples heated at $100^{\circ}C$. Therefore heating extraction of nucleic acid is reliable, quick and efficiency.