• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.332-337
• /
• 2002

This study was undertaken in order to compare reflux extraction(RE) and microwave-assisted extraction(MAE) in extraction efficiency and establish optimum microwave extraction conditions in obtaining Ligularia fischeri extracts. A considerable reduction in extraction time was accomplished by MAE. When 70% methanol 50% methanol 70% ethanol, or 50% ethanol was used, MAE extract contained equal levels of soluble solid and total polyphenol as obtained by RE. The optimum microwave-assisted extraction conditions for Ligularia fischeri were achieved by 120∼150 watts of microwave energy and 4∼8 minutes of extraction time. No significant changes were found in antioxidant activity with DPPH scavenging method over the variation of microwave energy or extraction time. The use of diluted methanol or ethanol improved soluble solid content(30%), total polyphenol content(2.7%) and antioxidant activity(68%).

• Natural Product Sciences
• /
• v.21 no.2
• /
• pp.141-145
• /
• 2015

Hesperidin, which is the most abundant flavonoid of Citrus unshiu (Rutaceae), has been reported to possess diverse activities and widely used as functional foods and cosmetics. For the development of functional products, extraction procedure is indispensable. Extraction conditions affect the composition of extract as well as its biological activity. Therefore, we tried to optimize extraction conditions such as extraction solvent, extraction time and extraction temperature for maximum yield of hesperidin using response surface methodology with threelevel-three-factor Box-Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 59.0%; temperature $71.5^{\circ}C$ and extraction time, 12.4 h. The hesperidin yield under the optimal condition was found to be $287.8{\mu}g$ per 5 mg extract, which was well matched with the predicted value of 290.5 μg. These results provides optimized extraction condition for hesperidin and might be useful for the development of hesperidin as functional products like health supplements, cosmetics and medicinal products.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.177-183
• /
• 2000

A supercritical fluid extraction was performed for the extraction of phenolics from grape seeds which up to now have been discarded. The optimum condition for extraction process was predicted through response surface methodology using central composit experimental design. The extraction amount of grape seed phenolics was increased by increasing extraction temperature, pressure, and concentration of co-solvent (ethanol). The optimum extraction conditions were 84.83$^{\circ}$C, 51.50MPa and 1.27% ethanol. The yield of phenolics using SFE was higher with 3 folds than ethanol and 4 folds than hexane but less than 80% methanol. In the respects of food poisoning, the approved solvents were restricted to ethanol and hexane. So, SFE for extraction of phenolics could be powerful alternative method for solvent extraction.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.574-577
• /
• 2017

In Indonesia, vetiver oil is one commodity that plays an important role in the country's foreign exchange earnings. Currently, the extraction of essential oil from vetiver still uses conventional methods. Therefore, the aim of this study was to know and verify the kinetics and mechanism of microwave hydrodistillation of vetiver based on two models. In this study, microwave hydrodistillation was used to extract essential oils from vetiver. The extraction was carried out in nine extraction cycles of 20 min to 3 hours. The rate constant, the equilibrium extraction capacity, and the initial extraction rate were calculated using the two models. Kinetics of oil extraction from vetiver by microwave hydrodistillation proved that the extraction process was based on the second-order extraction model. The second-order model was satisfactorily applied, with high coefficients of correlation ($R^2=0.9427$), showing that it well described the process.

• Preventive Nutrition and Food Science
• /
• v.10 no.3
• /
• pp.290-293
• /
• 2005

Soy isoflavones have drawn much attention due to their potential to prevent breast and prostate cancers, osteoporosis, heart disease, and other postmenopausal symptoms. Soy germ is one of the richest sources of isoflavones, and thus has good potential to be used as the ingredient of health foods. This study examined the extraction rate of isoflavones from soy germ at various conditions. After the effect of extraction temperature and duration on isoflavones extraction from soy germ was examined, the optimum concentration of ethanol as extraction solvent was determined. When ethanol concentration was fixed at $60\%\;(v/v)$, the maximum isoflavone extraction was achieved at 2 hrs and $30^{\circ}C$. Among various concentrations of ethanol tested, $80\%\;(v/v)$ ethanol showed the highest extraction efficiency. In conclusion, the maximum extraction of isoflavones was obtained using $80\%\;(v/v)$ ethanol as a solvent, at $30^{\circ}C$ of temperature, and 2 hrs of extraction time.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.836-840
• /
• 2005

Extraction characteristics of Bonus species of Brassica oleracea var. capita and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 44.07% was obtained at ratio of solvent to sample of 27.94 mL/g, ethanol concentration of 24.35%, and extraction temperature of $55.21^{\circ}C$. At ratio of solvent to sample, ethanol concentration, and extraction temperature of 21.11 mL/g, 58.53%, and $68.83^{\circ}C$, respectively, maximum electron-donating ability was 48.44%. Maximum inhibitory effect on tyrosinase was 68.94% at ratio of solvent to sample, ethanol concentration, and extraction temperature of 24.08 mL/g, 10.49%, and $78.71^{\circ}C$, respectively. Superoxide dismutase (SOD) showed maximum pseudo-activity of 24.78% at ratio of solvent to sample of 22.66 mL/g, ethanol concentration of 45.69%, and extraction temperature of $93.81^{\circ}C$. Based on superimposition of four-dimensional RSM with respect to extraction yield, electron-donating ability, and pseudo-activity of SOD, optimum ranges of extraction conditions were ratio of solvent to sample of 20-30 mL/g, ethanol concentration of 35-65%, and extraction temperature of $50-80^{\circ}C$.

• Journal of Ginseng Research
• /
• v.33 no.4
• /
• pp.337-342
• /
• 2009

The extraction conditions for the production of red ginseng polysaccharide were proposed. The crude fiber content of red ginseng marc (RGM) (15.3%) was much higher than that of white ginseng (WG) (2.1%) and red ginseng (RG) (0.5%). Thus, RGM was selected as the raw material for polysaccharide production. The correlation between the particle size of RGM and the polysaccharide extraction was investigated with a correlation analysis using the SPSS package. The two parameters were found to have a significant correlation (p<0.01). The polysaccharide extraction increased as the particle size of RGM decreased. The optimal concentration of RGM was 6.66% (w/v). The extraction yield increased as both the extraction temperature and the extraction time increased. Finally, the extraction temperature and time were selected as $85^{\circ}C$ and 5 hrs, respectively. Consequently, the extraction conditions for polysaccharide production were optimized and statistically confirmed.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.122-127
• /
• 2006

Fundamental studies were carried out for an effective removal and recovery of silver from waste photo-developing solution by solvent extraction. The organic solvents examined for silver-extraction were ALIQUAT 336, D2EHPA, KELEX 100, and TBP. ALIQUAT 336, which is an anionic exchanger, was found to be efficient for the extraction of silver and the reason for this was considered to be due to the chloride ion contained in its structure. The extent of silver extraction was examined to increase with the concentration of ALIQUAT 336 until it reached 0.6 M and no more extraction was observed above this concentration. The extraction of silver by ALIQUAT 336 was found to reach its pseudo-equilibrium within a few minutes after the reaction started and additional slight increase in silver extraction was observed until 30 minutes of reaction time. The observed differences in silver extraction for artificial and actual waste solutions were considered to be based upon the different ionic form of silver-containing species in these solutions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.23-28
• /
• 1985

The extraction rate of lipids from the chopped whole fish was studied with various solvents. Factors which can influence on the extraction rate such as temperature, moisture content, agitation speed and solvent were also examined. In the early stage of extraction, it is considered that the rapid extraction was attributed to cell destruction which occurs in chopping the whole fish and in the later stage, the extraction rate was increased linearly with extraction time. The effect of agitation on the extraction rate had a great influence on the early stage of extraction. In agitation speed of 100, 200, 300 and 500 r.p.m. the slopes of extraction curve were -0.075, -0.075, -0.069 and -0.064, respectively. Extractability between hydrophilic and hydrophobic solvent showed a great difference. It is suggested that extractability difference between acetone and isopropyl alcohol is due to acetone property which can not extract phospholipids in polar lipids. Extractability of lipids was increased with increasing temperature and decreased with increasing moisture content.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.504-510
• /
• 2019

The purpose of this study was to compare the effects of soaking and ultrasonic extraction by observing the change of contents with extraction time of physicochemical properties (solid content, colorness, caffeine, chlorogenic acid, total polyphenols, DPPH, and ABTS). As a result of the analysis, solid content increased with longer extraction time and the whiteness tended to decrease with longer extraction time. Conversely, the extraction of functional materials showed a tendency to increase as the extraction time increased. Caffeine reached the maximum value after two hours soaking, but showed the same result as one hour for sonication. Chlorogenic acid did not show difference from the content of coffee extracted for one hour soaking only by sonication extraction for 30 minutes. The total polyphenols eluted with approximately two hours of soaking even after 30 minutes of sonication. DPPH and ABTS were insignificant in their concentrations, but their antioxidative effect was more than two hours of soaking with only 30 minutes of sonication. Sonication has a short time extraction from a functional aspect (caffeine content, chlorogenic acid, polyphenol content, and antioxidant capacity) and this experiment can provide basic data for the development of innovative recipes.