• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.391-396
• /
• 1999

KSTAR vacuum vessel mockup was fabricated by Korea Heavy Industries. The fabrication technology chosen for the mockup is introduced and assessed in this paper. KSTAR vacuum vessel is a huge vacuum chamber of 52 cubic meters never built in this country. Through the experiency of the KSTAR mockup fabrication, welding methods for obtaining both ultra high vacuum and structural integrity of the large vacuum chamber are extracted. The fabrication and assembly techniques for the complicated structure composed of reinforced ribs, double walls and various ports are also developed. A nondestructive test on the welding spot was performed and the results show that no major leaks violating the criterion were found. The one of the main objectives of the mockup fabrication is to measure the dimensions of the structure before and after fabrication, which plays an important role in the fabrication and the assembly. By assaying the problems occurred during mockup fabrication, the KSTAR mockup will provide the techniques for the fabrication of the main vacuum vessel.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.474.1-474.1
• /
• 2006

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.1
• /
• pp.9-19
• /
• 2012

Objectives: The aim of this study is to critically review the exposure surrogates and estimates used to associate health effects in wafer fabrication workers such as spontaneous abortion and cancer, as well as to identify the limitations of retrospective exposure assessment methods Methods: Epidemiologic and exposure-assessment studies of wafer fabrication operations in the semiconductor industry were collected. Retrospective exposure-assessment methods used in cancer risk and mortality and reproductive toxicity were reviewed. Results: Eight epidemiologic papers and two reports compared cancer risk among workers in wafer fabrication facilities in the semiconductor industry with the risk of the general population. Exposure surrogates used in those cancer studies were fabrication(vs. non-fabrication), employment duration, manufacturing eras, job title (operator vs. maintenance worker) and qualitative classifications of agents without assessing specific agent or job-specific exposure. In contrast, specific operation, job title and agents were used to classify the exposure of fabrication workers, contributing to finding a significant association with spontaneous abortion (SAB). Conclusion: Further epidemiologic studies of fabrication workers using more refined exposure assessment methods are warranted in order to examine the associations between fabrication work, environment, and specific agents with cancer risk or mortality as used in SAB epidemiologic studies.

• Journal of KIBIM
• /
• v.9 no.3
• /
• pp.30-40
• /
• 2019

Extraction of fabrication documents is very important because it provides information related to tasks of fabrication and construction. Therefore, in the case of a prefabricated member such as a steel structure, it is necessary to improve the productivity of fabrication documents through 3D BIM. However, research and evidence data on direct comparison analysis of 3D BIM-based documents extraction versus 2D CAD-based documents extraction are hard to find. Thus, this study focuses on productivity analysis of 3D BIM based fabrication documents extraction. In this study, the productivity data of fabrication documents extraction for module construction of EPC project was analyzed. For the productivity analysis, a case study on the fabrication documents of Module A (1,965 sheets) and Module B (1,216 sheets) was conducted. Fabrication documents for each module include general arrangement drawing, assembly drawing, single part drawing and single plate drawing. Comparison of 2D CAD based fabrication documents extraction and 3D BIM based fabrication documents extraction, the productivity for the entire work was improved from 17 hours to 16 hours for Module A and 12 hours to 7 hours for Module B. Especially, the productivity of the assembly drawings, which occupies a large part of the fabrication documents, was improved by about 48.75% from the total time required from 281 hours to 144 hours.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.399-408
• /
• 2021

Information security reports four types of basic attacks on information. One of the attacks is named as fabrication. Even though mobile devices and applications are showing its maturity in terms of performance, security and ubiquity, location-based applications still faces challenges of quality of service, privacy, integrity, authentication among mobile devices and hence mobile users associated with the devices. There is always a continued fear as how location information of users or IoT appliances is used by third party LB Service providers. Even adversary or malicious attackers get hold of location information in transit or fraudulently hold this information. In this paper, location information fabrication scenarios are presented after knowing basic model of information attacks. Peer-to-Peer broadcast model of location privacy is proposed. This document contains introduction to fabrication, solutions to such threats, management of fabrication mitigation in collaborative or peer to peer location privacy and its cost analysis. There are various infrastructure components in Location Based Services such as Governance Server, Point of interest POI repository, POI service, End users, Intruders etc. Various algorithms are presented and analyzed for fabrication management, integrity, and authentication. Moreover, anti-fabrication mechanism is devised in the presence of trust. Over cost analysis is done for anti-fabrication management due to nature of various cryptographic combinations.

• Journal of KIBIM
• /
• v.8 no.1
• /
• pp.43-55
• /
• 2018

Recently, there have been increasing studies on the application of digital technology, which has its focus of the irregular building. However, most of these studies have not clarified the objective of the technology and the effectiveness of professional manpower on its performance. This study analyzes actual used technology and the role of specialty contractor. It presents a framework to quantify the performance of the specialty contractor. For these purposes, this paper presents a proposed method to evaluate the activities of specialty contractors using a queueing model. As an attempt to verify the model, an actual irregular building project, in which digital fabrication is applied, is investigated during the construction phase. In order to collect the digital fabrication data, digital fabrication reports and specialty contractor's work log of project are reviewed. In addition, Digital Fabrication input personnel, productivity data are collected through interviews with experts involving in the case project. Analysis of specialty contractor's performance in digital fabrication reveals that the wait status of project participants varies probabilistically depending on the digital technology application level. The results of this study are expected to contribute toward the improvement of the production level in the construction industry.

• Journal of the Korean School Mathematics Society
• /
• v.14 no.2
• /
• pp.163-178
• /
• 2011

The mathematics curriculum revised in 2007 includes 'problem fabrication'. So it is necessary to analyse the texts how much they include problem fabrication. In mathematics, problem fabrication and problem solving interact and stimulate each other. Also the main purpose of problem fabrication is to improve the students' problem solving. There are 16 different texts of grade 7 algebra which contain problems concerning 'problem fabrication'. We count the number of such problems in each sections. Also we divide problem fabrication into five types. Then we count the number of problems in each type and its frequencies in a section.

• Journal of the Korea Society for Simulation
• /
• v.8 no.3
• /
• pp.49-66
• /
• 1999

Semiconductor wafer fabrication is known to be one of the most complex manufacturing processes due to process intricacy, random yields, product diversity, and rapid changing technologies. In this study we are concerned with the impact of lot release and dispatching policies on the performance of semiconductor wafer fabrication facilities. We consider several semiconductor wafer fabrication environments according to the machine failure types such as no failure, normal MTBF, bottleneck with low MTBF, high randomness, and high MTBF cases. Lot release rules to be considered are Deterministic, Poisson process, WR(Workload Regulation), SA(Starvation Avoidance), and Multi-SA. These rules are combined with several dispatching rules such as FIFO (First In First Out), SRPT (Shortest Remaining Processing Time), and NING/M(smallest Number In Next Queue per Machine). We applied the combined policies to each of semiconductor wafer fabrication environments. These policies are assessed in terms of throughput and flow time. Basically Weins fabrication setup was used to make the simulation models. The simulation parameters were obtained through the preliminary simulation experiments. The key results throughout the simulation experiments is that Multi-SA and SA are the most robust rules, which give mostly good performance for any wafer fabrication environments when used with any dispatching rules. The more important result is that for each of wafer fabrication environments there exist the best and worst choices of lot release and dispatching policies. For example, the Poisson release rule results in the least throughput and largest flow time without regard to failure types and dispatching rules.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.25-33
• /
• 2012

Ever since the local interior and architecture design industry adopted Digital fabrication modeling tool for its design operation in early 1990's, working environment has been changing. The Purpose of study is to analyze the digital Architecture fabrication modeling for digital design education in academy course. Digital Design Tools, Digital Space and Form, Digital Materiality and Digital Production. The Digital fabrication modeling is and important role in a traditional design process and digital design process. It is comprised of digital input devices(3D digitizer, 3D design tools) and digital output devices(cutting plotters, laser cut, CNC machines, 3D printers). Digital input devices can be shift a traditional design process to digital design process. Digital output devices are the principle of digital fabrication by CAD/CAM. Also, the result of this study provide the fundamental data for physical resources and digital design curriculum in KAAB.

• Architectural research
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2015

This study examines the significance of digital fabrication of scaled physical models in the digital design process and highlights the integration of design computing and digital fabrication in architectural education. Advances in CAD/CAM technologies have increasingly influenced building design and construction practices by allowing the production of complex forms that were once difficult to design and construct using traditional technologies. At the advent of digital architecture, schools of architecture introduced digital technologies to their curriculum, focusing more on design computing than digital fabrication, preventing students from completely mastering digital technologies. The significance of digital fabrication for scaled physical models as a design media within the digital design loop is discussed. Two case studies of leading schools of architecture that are successful in building the bridge between both areas are given. These focus on the curricular structure to integrate both areas within design studios. Finally, a curricular structure offering students a balanced approach to these areas of knowledge is proposed based on what was learned from these case studies.