• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.118-122
• /
• 2010

The interest in textile which has far-infrared ray emissive property has been increased in the field of biophysics and medicine. In this study, far-infrared ray emissive polyurethane nano-web was obtained using electrospinning of polyurethane(PU) solution mixed with ceramics powder and far-infrared ray emissive properties of nano-web were evaluated by measuring far-infrared ray emission power and emissivity(%). To investigate the influence of concentration of ceramics powder in PU solution and temperature for far-infrared ray emissive properties, far-infrared ray emissivity was measured at varied temperature using various nano-web including varied concentration of ceramics powder. Polyurethane nano-web was characterized by SEM to observe the deposition of ceramics powder on polyurethane nano-web surface. The far-infrared ray emissivity was increased with the concentration of ceramics powder in the nano-web. The far-infrared ray emission power was enhanced with increasing temperature of the samples; however, far-infrared ray emissivity was decreased with increasing temperature because the increase of emission power of ceramic containing nano-web was lower than the emission power of black body one.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.106-112
• /
• 2016

This study investigated electrical properties and far-infrared ray emission according to the carbonizing temperature and phenol-formaldehyde (PF) resin impregnation ratio of ceramics manufactured using sawdust and rice husk. The far-infrared ray emission values and emission energy values decreased as the carbonizing temperature increased. The far-infrared ray emission values of the ceramics manufactured using a carbonizing process at $600^{\circ}C$ and a board with a PF resin impregnation ratio of 60 percent was 0.930; the emission energy presented the highest value of $4.32{\times}10w/m^2$. The electric resistance decreased as the carbonizing temperature increased. For the increase in the carbonizing temperature above $1200^{\circ}C$, ceramics was very close to a conductor due to the small resistance. The power consumption increased by the decrease of electric resistance and increase of the electric current in the case of a higher resin impregnation ratio.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.597-603
• /
• 2006

In order to study the effects of $GeO_{2}$ contents in $XSiO_{2}{\cdot}YGeO_{2}$ and $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ compounds on far infrared ray radiation, we investigated the sample of $XSiO_{2}{\cdot}YGeO_{2}$ and $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ using TG-DTA, XRD, FT-IR spectrophotometer and FT-IR spectrometer. The far infrared ray emissivity and emission power were increased with the increase of $GeO_{2}$ contents in $XSiO_{2}{\cdot}YGeO_{2}$ and $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ compounds. The far infrared ray emissivity and emission power of $XSiO_2{\cdot}YGeO_2$ compounds were higher than those of $XSiO_{2}{\cdot}YNa_{2}O{\cdot}ZGeO_{2}$ compounds.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.104-112
• /
• 2022

Indoor air quality is a very important environmental factor in modern society. However, air pollutants generated from various interior construction materials significantly affect the human body, including formaldehyde (HCHO) and volatile organic compounds that threaten public health by deteriorating indoor air quality. Effective in removing these harmful substances are porous materials, such as woodceramics. In this study, charcoal, a porous material, was added to rice husk, an agricultural by-product, and sawdust generated during the sawing process to prepare boards and ceramics at different mixing ratios, and the HCHO deodorization performance and far-infrared emission characteristics were measured. As the mixing ratio of charcoal increased, the deodorization rate of the boards and ceramics tended to increase. Overall, the deodorization rate was measured to be 80% to 90%, indicating that the boards and ceramics prepared with charcoal are suitable to be used for the purpose of deodorization. The effect of the material mixing ratio on far-infrared emissivity and emission power was insignificant.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.47-52
• /
• 2008

The far-infrared ray (FIR) has been applied to various fields such as medical therapy, kitchen utensils, bath supplies, and so on. The FIR-emitting agent was used to make functional paperboards to have freshness-maintaining ability. The FIR-emitting agent was diluted with different concentrations at 0.5% starch solution, and the FIR-emitting solutions were coated on paperboards, i.e., liner. The more the concentration of the FIR radiating agent increased at 0.5% cationic starch solution, the higher FIR emissivity and emission power of paperboards increased. The corrugated boxes made of paperboards coated by the FIR-radiating agents at over 5% dilution concentration endowed mandarin oranges in the boxes with greater antimicrobial activity than those in boxes made of paperboards coated by the agent at below 5% concentration. In addition, it was ascertained that treatment of the FIR agents rarely affected strength properties of paperboards.

• Journal of Power System Engineering
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2006

This paper aims to study several type heaters which are mica heater, film heater, quartz heater and rod heater and to get an temteraturel and electrical characteristics. These four type heaters have a merit in many fields than present electric heater with nichrome wire. Carbon and mica plate heater have higher heat efficiency and less electromagnetic waves. Also it has been reported that far infrared ray emission from this heater is good for our health. Additionally heating element is thin and lighter plate. For these reasons, they will be widely used to various application such as room-heating or manufacturing goods. Experimental result confirmed that when 220V current authorized, the temperature, electric current, electric power and the resistance rise to stationary state in early stage. Moreover, the temperatures and electric characteristics show a good stability.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.440-450
• /
• 2009

In case of wood flooring, the high emissivity would be one of the most important properties especially as the cover material of underfloor heating system. The FIR (Far Infrared) materials such as wood emit FIR energy by heating, which has been used as the medical therapy such as dry sauna. This research investigated the emissivity and the emission power of wood composites by comparing the amount of the three heat transfer modes transferred by infrared radiation which came from the increased temperature of the bottom board of the plywood box by the heater. The results showed the value of radiation mode was the highest mode for the plywood box, and the convection mode was the main mode for the aluminum box. The rate of convection was 81.8% in the aluminum box and 48.2% in the plywood box, respectively. In case of the rate of radiation, the aluminum box showed only 15.4% and the plywood box showed 51%. The emissivity and the emission power of birch plywood showed the same values as those of wood. The amount of energy required for the temperature rising of water within vial in the aluminum box and in the plywood box were 3.32 kJ and 6.70 kJ respectively, which showed that the vial temperature of the plywood box was two times higher than that of the aluminum box.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.17-20
• /
• 2005

This research was carried out to examine the FIR (far-infrared rays) emissivity and emission power of five Korean wood species for proving wood as an amenity material. Wood turned out excellent as FIR material with 90~91% emissivity in the range of $5{\sim}20{\mu}m$ at $40^{\circ}C$. No difference was identified in the FIR emissivity and emission power between hardwood and softwood, diffuse porous wood and ring porous wood, and high-density wood and low-density wood respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.258-263
• /
• 2022

This experiment was conducted to confirm the possibility of manufacturing artificial Italian ryegrass hay using far-infrared rays in Korea. The machine used in this experiment was a far-infrared ray dryer capable of adjusting temperature, airflow, and far-infrared radiation, and was conducted on Italian ryegrass harvested in May. Conditions for drying were performed by selecting a total of nine conditions, and each condition was set to emission rate of 42 to 45%, and the internal temperature was set to 65℃. The speed of the air flow in the machine was 40-60 m/s, and the overall drying time was 30 minutes for 42% radiation, 25 minutes for 43% radiation, and 20 minutes for 45% radiation. The final dry matter content according to each drying condition was 88.5% on average, and the dry matter content suitable for hay was shown in the all treatment. Looking at the power consumption according to the drying conditions, the lowest was found in the treatment that dried for 20 minutes at 45% radiation. In the drying rate, there was no difference in drying conditions 1 to 5, but a significantly low tendency was shown in conditions 6 to 7. In terms of feed value, CP and IVDMD were higher than raw materials in most drying conditions, and ADF and NDF contents were low, and tended to be high in drying conditions 4, 7, and 8. Through the above results, it was judged that drying conditions 7 and 8 were the most advantageous when considering drying speed, power consumption, and quality.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.593-596
• /
• 2006

The environment-friendly building material, photocatalyst/scoria/loess concrete, was prepared using scoria and loess (which have merits as building materials) and photocatalyst (which has the functions to compose the environmental contaminants and of self cleaning). In order to apply this material as a building material, the compressive and flexible strengths, and water absorptivity (which have been set by Korea Industrial Standard) were measured. In order to know the environment-friendly characteristics of this material, several tests, such as, the tests of emissivity and emission power of far infrared ray and acoustic absorptivity, antibacterial test for Escherichia coli and Pseudomonas aeruginosa, antifungal test for mixed fungal strains, and deodorization test of ammonia were carried out. Moreover, the removal characteristics of NOx, and formaldehyde (HCHO) by photocatalyst/scoria/loess concrete were examined as the following different parameters: the removal characteristics of these contaminants with the substitution ratio and the kind of photocatalyst, light source, UV intensity of sunlight, relative humidity, intial NOx concentration.