• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.178-186
• /
• 2011

Static CAD models are the CAD models that do not have feature information and modeling history. These static models are generated by translating CAD models in a specific CAD system into neutral formats such as STEP and IGES. When a CAD model is translated into a neutral format, its precious feature information such as feature parameters and modeling history is lost. Once the feature information is lost, the advantage of feature based modeling is not valid any longer, and modification for the model is purely dependent on geometric and topological manipulations. However, the capabilities of the existing methods to modify static CAD models are limited, Direct modification methods such as tweaking can only handle the modifications that do not involve topological changes. There was also an approach to modify static CAD model by using volume decomposition. However, this approach was also limited to modifications of protrusion features. To address this problem, we extend the volume decomposition approach to handle not only protrusion features but also depression features in a static CAD model. This method first generates the model that contains the volume of depression feature using the bounding box of a static CAD model. The difference between the model and the bounding box is selectively decomposed into so called the feature volume and the base volume. A modification of depression feature is achieved by manipulating the feature volume of the static CAD model.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.67-75
• /
• 2003

Viewpoint-dependent feature-based modelling in computer-aided design is developed for the purposes of supporting engineering design representation and automation. The approach of this paper uses a combination of a multi-level modelling approach. This has two stages of mapping between models, and the multi-level model approach is implemented in three-level architecture. Top of this level is a feature-based description for each viewpoint, comprising a combination of form features and other features such as loads and constraints for analysis. The middle level is an executable representation of the feature model. The bottom of this multi-level modelling is a evaluation of a feature-based CAD model obtained by executable feature representations defined in the middle level. The mappings involved in the system comprise firstly, mapping between the top level feature representations associated with different viewpoints, for example for the geometric simplification and addition of boundary conditions associated with moving from a design model to an analysis model, and secondly mapping between the top level and the middle level representations in which the feature model is transformed into the executable representation. Because an executable representation is used as the intermediate layer, the low level evaluation can be active. The example will be implemented with an analysis model which is evaluated and for which results are output. This multi-level modelling approach will be investigated within the framework aimed for the design automation with a feature-based model.

• 한국컴퓨터정보학회논문지
• /
• 제18권1호
• /
• pp.123-136
• /
• 2013

시각적이고 비정형적인 구조로 표현된 휘처 모델(Feature model)은 구문적 명확성을 보장할 수 없고, 자동화 툴(tool)에 의한 구문(syntax)의 검증이 어렵다. 따라서, 휘처 모델이 가진 구조물의 구문적 명확성을 입증하기 위한 정형적 명세와 모델 검사(model checking)가 필요하다. 본 논문은 Z 언어를 이용한 휘처 모델의 정형적 명세와 모델 검사를 통해서, 휘처 모델의 정확성을 검사하는 기법을 제시한다. 이를 위해, 휘처 모델과 Z간 변환 규칙을 정의하고, 이 규칙에 의거하여 휘처 모델의 구문에 대해 Z 스키마(schema)로 명세한다. 모델 검사는 Z 스키마 명세에 대해 Z/Eves 툴을 사용하여 구문, 타입 검사(type checking), 그리고 도메인 검사(domain checking)를 수행하여 모델의 모호성을 검사한다. 이로서, 휘처 모델의 구조물을 좀더 명확하게 표현할 수 있으며, 설계된 모델의 오류를 검사할 수 있다.

• ETRI Journal
• /
• 제30권1호
• /
• pp.89-100
• /
• 2008

We consider the feature recombination technique in a multiband approach to speaker identification and verification. To overcome the ineffectiveness of conventional feature recombination in broadband noisy environments, we propose a new subband feature recombination which uses subband likelihoods and a subband reliable-feature selection technique with an adaptive noise model. In the decision step of speaker recognition, a few very low unreliable feature likelihood scores can cause a speaker recognition system to make an incorrect decision. To overcome this problem, reliable-feature selection adjusts the likelihood scores of an unreliable feature by comparison with those of an adaptive noise model, which is estimated by the maximum a posteriori adaptation technique using noise features directly obtained from noisy test speech. To evaluate the effectiveness of the proposed methods in noisy environments, we use the TIMIT database and the NTIMIT database, which is the corresponding telephone version of TIMIT database. The proposed subband feature recombination with subband reliable-feature selection achieves better performance than the conventional feature recombination system with reliable-feature selection.

• 대한음성학회지:말소리
• /
• 제63호
• /
• pp.125-137
• /
• 2007

Recently, many techniques have been proposed to improve the noise robustness for speaker verification. In this paper, we consider the feature recombination technique in multi-band approach. In the conventional feature recombination for speaker verification, to compute the likelihoods of speaker models or universal background model, whole feature components are used. This computation method is not effective in a view point of multi-band approach. To deal with non-effectiveness of the conventional feature recombination technique, we introduce a subband likelihood computation, and propose a modified feature recombination using subband likelihoods. In decision step of speaker verification system in noise environments, a few very low likelihood scores of a speaker model or universal background model cause speaker verification system to make wrong decision. To overcome this problem, a reliable feature selection method is proposed. The low likelihood scores of unreliable feature are substituted by likelihood scores of the adaptive noise model. In here, this adaptive noise model is estimated by maximum a posteriori adaptation technique using noise features directly obtained from noisy test speech. The proposed method using subband-based reliable feature selection obtains better performance than conventional feature recombination system. The error reduction rate is more than 31 % compared with the feature recombination-based speaker verification system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.367-372
• /
• 2001

Feature restoration is that restore feature to 3D solid model using the feature information in STEP AP224. Feature is very important in CAPP, but feature information is defined very complicated in STEP AP224. This paper recommends the algorithm of extraction the feature information in physical STEP AP224file. This program import STEP AP224 file, parse the geometric and topological information, the tolerance data, and feature information line-by-line. After importation and parsing, store data into database. Feature restoration module analyze database including feature information, extract feature information, e.g. feature type, feature's parameter, etc., analyze the relationship and then restore feature to 3D solid model.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.733-744
• /
• 2016

BPMN 모델로부터 휘처(Feature) 모델로 변환하는 기존 방법들이 도메인 분석가의 직관에 의존하여 자동화된 변환이 어려운바, 비즈니스 모델링 연계의 휘처 지향 개발의 활성화에 저해가 되고 있다. 본 고는 구조 기반의 BPMN 비지니스 모델을 휘처 도메인 모델로 변환하는 방법을 제시한다. 상호 이질적인 BPMN(Business Process Modeling Notation)과 FM(Feature Model) 모델간의 변환을 위해서, 액티비티의 구조에 기반한 그룹핑 기법을 정의하고, 이들 모델의 공통 구조물인 요소(비지니스 기능을 표현)와 구조(요소간 관계 및 프로세스)에 기반해서 모델간 변환 규칙과 방법을 정립한다. 온라인쇼핑몰 시스템을 대상으로 적용 사례를 보인다. 이로서, BPMN 모델로부터 휘처 모델로의 기계적인 혹은 자동화된 구조 변환을 도모할 수 있다.

• 한국멀티미디어학회논문지
• /
• 제24권12호
• /
• pp.1614-1623
• /
• 2021

In this paper, the purpose is evaluation of the effect of using fractal feature in machine learning based pancreatic tumor classification. We used the data that Pancreas CT series 469 case including 1995 slice of benign and 1772 slice of malignant. Feature selection is implemented from 109 feature to 7 feature by Lasso regularization. In Fractal feature, fractal dimension is obtained by box-counting method, and hurst coefficient is calculated range data of pixel value in ROI. As a result, there were significant differences in both benign and malignancies tumor. Additionally, we compared the classification performance between model without fractal feature and model with fractal feature by using support vector machine. The train model with fractal feature showed statistically significant performance in comparison with train model without fractal feature.

• Journal of information and communication convergence engineering
• /
• 제21권1호
• /
• pp.82-89
• /
• 2023

Various machine-learning models may yield high predictive power for massive time series for time series prediction. However, these models are prone to instability in terms of computational cost because of the high dimensionality of the feature space and nonoptimized hyperparameter settings. Considering the potential risk that model training with a high-dimensional feature set can be time-consuming, we evaluate a feature-importance-based feature selection method to derive a tradeoff between predictive power and computational cost for time series prediction. We used two machine learning techniques for performance evaluation to generate prediction models from a retail sales dataset. First, we ranked the features using impurity- and Local Interpretable Model-agnostic Explanations (LIME) -based feature importance measures in the prediction models. Then, the recursive feature elimination method was applied to eliminate unimportant features sequentially. Consequently, we obtained a subset of features that could lead to reduced model training time while preserving acceptable model performance.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.71-82
• /
• 2013

To modify product design easily, modern CAD systems adopt the feature-based model as their primary representation. On the other hand, the boundary representation (B-rep) model is used as their secondary representation. IGES and STEP AP203 edition 1 are the representative standard formats for the exchange of CAD files. Unfortunately, both of them only support the B-rep model. As a result, feature data are lost during the CAD file exchange based on these standards. Loss of feature data causes the difficulty of CAD model modification and prevents the transfer of design intent. To resolve this problem, a tool for recognizing design features from a B-rep model and then reconstructing a feature-based model with the recognized features should be developed. As the first part of this research, this paper presents a method for decomposing a B-rep model into simple volumes suitable for design feature recognition. The results of experiments with a prototype system are analyzed. From the analysis, future research issues are suggested.