• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.490-502
• /
• 2012

The use of recycled aggregate, even for low-performance concrete, has been very limited because recycled aggregate, which contains a large amount of old mortar, is very low in quality. To produce a high-quality recycled aggregate, removing the paste that adheres to the recycled aggregate is very important. We have conducted research on a complex abrasion method, which removes the component of cement paste from recycled fine aggregate by using both a low-speed wet abrasion crusher as a mechanical process and neutralization as chemical processes, and well as research on the optimal manufacturing condition of recycled fine aggregates. Subsequently, we evaluated the quality of recycled fine aggregate manufactured using these methods, and tested the specimen made by this aggregate. As a result, it was found that recycled fine aggregates produced by considering the aforementioned optimal abrasion condition with the use of sulfuric acid as reactant showed excellent quality, recording a dry density of 2.4 and an absorption ratio of 2.94. Furthermore, it was discovered that gypsum, which is a reaction product occurring in the process, did not significantly affect the quality of aggregates. Furthermore, the test of mortar using this aggregate, when gypsum was included as a reaction product, showed no obvious retarding effect. However, the test sample containing gypsum recorded a long-term strength of 25.7MPa, whereas the test sample that did not contain gypsum posted a long-term strength of 29.4MPa. Thus, it is thought to be necessary to conduct additional research into the soundness and durability because it showed a clear reduction of strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.139-140
• /
• 2016

In this research, the possibility of wasted refractory aggregate pulverized from refractory block as an expansive admixture and additional alkaline stimulant for class two and three blast furnace slag cements (BSC) was assessed with its high content of free CaO or free MgO. As the replacement ratios of wasted refractory powder and blast furnace slag were increased, flow and air content were decreased, while unit volume weight was increased under same conditions. Compressive strength of mortar was increased with increased replacement ratio of wasted refractory powder, especially, in the case of class three BSC, the highest compressive strength was obtained when wasted refractory aggregate was replaced 2%.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.187-194
• /
• 2014

With environmental regulations continuously being strengthened internationally the need to control environmental pollution and environmental load is emerging in Korea. The purpose of this study is to seek methods or using waste cementitious powder as an alternative raw material for limestone through the optimization of raw material and to quantitatively analyze the resulting reduction of $CO_2$ emission in order to contribute to solving the issue of waste, which is the biggest issue in relation to construction and global warming. The results of the study, show that waste cementitious powder can be used as an alternative raw material for limestone at OPC level, but it was also found that mixing fine aggregate cementitious powder into waste cementitious powder significantly affected the substitution rate for limestone with waste cementitious powder and the reduction of greenhouse gas. In particular, when fine aggregate cementitious powder was used at a rate of 0~20%, the substitution rate for limestone and the reduction in the rate of greenhouse gas emission was significantly reduced. It is thought that a technique to efficiently separate and discharge the fine aggregate cementitious powder mixed in waste cementitious powder needs to be developed in the future.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.63-72
• /
• 2012

고유동 콘크리트는 일반 콘크리트에 비해 고가의 각종 혼화재료를 과량 혹은 추가로 사용하여야 하기 때문에 재료비 단가 상승, 추가 설비의 필요 등의 문제점이 있고, 재료분리를 방지하기 위해 분체량을 증가시킴으로써 과잉 강도발현 등 고유동 콘크리트가 갖고 있는 많은 장점이 있음에도 특수 목적이외에는 그 사용에 있어 제약이 있었다. 이에 본 연구에서는 기존에 개발된 고강도성 고유동 콘크리트와 달리 일반 강도의 고유동 콘크리트의 상용화를 위해 콘크리트 구성 재료 중에서 골재를 중심으로 이들의 합리적 활용과 콘크리트의 성능향상 모색을 위해 정량적 인자별 실험을 수행하였다. 사용한 실험변수로 물-시멘트비, 잔골재율, 골재의 조립률, 입자 크기의 중요도, 13mm 골재와 미립분의 활용에 대해 검토하였으며, 슬럼프플로와 U형 충전시험의 충전고차로 평가하였다. 연구결과, 고유동 콘크리트 성상은 굵은 골재보다 잔골재 입도에 대한 의존도가 높으며, 잔골재율이 높을수록, 조립률이 낮을수록 충전성과 유동성 확보에 유리하였다. 또한, 골재의 대체재로써 13mm 골재 및 미립의 석분을 활용함으로써 보다 효율적으로 충전성과 유동성을 향상시킬 수 있음이 본 연구를 통해 확인되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.641-646
• /
• 2001

Generally, when Fly-Ash was used as replacement material of cement in concrete, it might occur retardation of setting and hardening. So, it is unable to use a large amount of Fly-Ash as replacement for cement. However, if it is used as replacement material of fine aggregate in concrete, we can use a large amount of Fly-Ash and settle a problem of natural-aggregate exhaustion. Furthermore, engineering properties of High Volume Fly-Ash Concrete Is better than that of plain concrete But, the larger Fly-Ash is replaced, the more fluidity of High Volume Fly-Ash Concrete decrease, because porous organization of Fly-Ash adsorb water and Superplasticizer. In this study, after appending additional water to High Volume Fly-Ash Concrete in proportion to weight of Fly-Ash, we intend to find proper ratio which doesn't affect strength and satisfy fluidity As a result of this study, it was found that fluidity of mortar with 25~28 percentage of additional water was satisfied with fluidity of plain mortar, and compressive strength of that was similar to plain mortar's

• 한국건축시공학회지
• /
• 제6권1호
• /
• pp.73-77
• /
• 2006

Drying Shrinkage has much complexity as it has relations with both internal elements of concrete and external factors. Therefore, experiments on Concrete Drying Shrinkage are carried out in this study under simplified circumstances applying temperature & Humidity test chamber which enables constant temperature and humidify. Comparative analyses have been made respectively according to the consequences aiming at modelling for prediction of Concrete Drying Shrinkage and making out measures to reduce it. As a result Strain Rate of Drying Shrinkage of concrete was measured to increase by average $10{\times}10^{-5}$ in proportion to additional 4% increase in fine aggregate ratio, when water/cement ratio constant. Strain Rate of Drying Shrinkage in pit sand concrete increased 20% higher than measured when in river sand under the condition of 90-day material age. 6. Strain Rate of Drying Shrinkage in sea sand concrete increased $10%{\sim}15%$ higher than measured when in river sand. The results of prediction of Rate of Drying Shrinkage by Response Surface Analysis are as fellows. The coefficient of correlation of Drying Shrinkage in concrete was over 90%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.148-149
• /
• 2014

The aim of this research is to contribute on investment of less cement mortar or concrete in normal strength range using additional hydration of BS with stimulating effect of FGD and OPC based on the previous research result of the BS and RFA using cement mortar. As a test, the composition for normal strength range of mortar was evaluated with 0, 10, and 20 % of FDA and 0, 20 % of OPC replacement.

• 한국건축시공학회지
• /
• 제20권4호
• /
• pp.331-338
• /
• 2020

본 연구는 CGS를 콘크리트용 혼합골재로서 활용성을 검토하기 위하여 양호한 입도분포의 부순잔골재(CSa) 및 미립자인 해사와 굵은 입자의 부순잔골재를 혼합한 혼합골재(MS)에 CGS의 치환율 변화에 따른 콘크리트의 기초적 특성 및 내구성을 분석하였다. 실험결과, 슬럼프 및 슬럼프 플로는 CSa 및 MS 모두 CGS 치환율이 증가할수록 증가하였으며, 공기량은 반대로 감소하였다. 압축강도는 CSa를 사용한 경우 CGS 치환율이 증가할수록 저하하였지만, MS를 사용한 경우는 CGS 50 %에서 최대치를 나타내었다. 콘크리트 내구성을 검토한 결과로, 건조수축 및 탄산화 깊이측정의 경우는 CGS 치환율에 따라 양호한 성능을 나타내었다. 하지만, 내동해성에서는 전반적으로 CGS 치환율이 증가할수록 감소하는 것으로 나타났다. 따라서, CGS를 치환 사용하는 혼합잔골재 콘크리트의 경우는 공기량 감소를 보완할 수 있도록 AE제 추가 투입 등의 대책을 수립한다면, 큰 문제 없을 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제14권2호
• /
• pp.190-198
• /
• 2002

본 연구에서는 폐 FRP(fiber reinforced plastics) 미분말을 잔골재 대용으로 치환한 폴리머 시멘트 모르타르의 물성을 조사하였다. 폴리머 혼화제로는 Styrene-Butadiene Rubber(SBR) 라텍스, Polyacrylic Ester(PAE) 에멀젼 및 Ethylene-Vinyl Acetate(EVA) 에멀젼을 사용하였다. 폐FRP 미분말의 치환율을 5~30 wt%, 폴리머 혼화제의 첨가량을 폴리머 시멘트비 5~20 wt%로 변화시켜 공시체를 제작하였다. 굳지 않은 폴리머 시멘트 모르타르의 물성, 경화 공시체의 흡수율, 내열수성 및 양생방법 에 따른 압축 및 휨강도를 측정하였다. 폐FRP 미분말을 치환ㆍ첨가한 폴리머 시멘트 모르타르의 압축 및 휨강도는 폐FRP 미분말의 치환량이 증가할수록 감소되었고, 폴리머 시멘트비가 증가할수록 증가되었다. 폴리머 혼화제로서 SBR 라텍스를 사용한 폴리머 시멘트 모르타르의 강도특성이 가장 우수하였고, 폴리머 시멘트 모르타르의 적정한 폴리머 시멘트비는 20wt%이었고, 폐FRP 미분말의 적정 치환량은 20wt%로 나타났다. 또한 폴리머 시멘트 모르타르는 가열양생에 의해 강도발현이 촉진되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.38-39
• /
• 2016

In this research, the possibility of wasted refractory powder pulverized from refractory block as an expansive admixture and additional alkaline stimulant for class two and three blast furnace slag cements (BSC) was assessed with its high content of free CaO or free MgO. As the replacement ratios of wasted refractory powder and blast furnace slag were increased, flow and air content were decreased, while unit volume weight was increased under same conditions. Compressive strength of mortar was increased with increased replacement ratio of wasted refractory powder, especially, in the case of class three BSC, the highest compressive strength was obtained when wasted refractory powder was replaced 10 %.