• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.11-17
• /
• 2017

본 연구에서 개발하려는 개발기술의 핵심은 "평면이 아닌 곡률이 있는 플렉시블 디스플레이에 4차원 편집환경을(시간포함)제공하는 매니지먼트 소프트웨어를 개발해 콘텐츠를 가공하고 편집하여 디스플레이에 생명을 불어 넣을 수 있는 세계최초의 곡률디스플레이 고화질(UHD급 ${\times}$ 250)용 4차원편집 환경 제공 엔진" 이다. 세부개발기술과 내용은 첫째, 세계최고의 플렉시플 고화질(UHD급 ${\times}$ 256 스크린)멀티스크린 동기화를 위한 4차원 비디오월(시간배열 포함) 편집환경 기술을 구현하며 둘째, 곡률이 있는 플렉시블 디스플레이로 구현된 입체화된 비디오월 및 디지털사이니지 환경을 위한 360도 인지 센서 환경이 구축된 양방향 인터렉티브 UI/UX용 인터페이스를 구현하며 셋째, 세계 최초로 입체화된 전자북 구현을 위한 편집 툴 소프트웨어 개발 구현을 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3348-3364
• /
• 2021

Magic matrix-based data hiding schemes are applied to transmit secret information through open communication channels safely. With the development of various magic matrices, some higher dimensional magic matrices are proposed for improving the security level. However, with the limitation of computing resource and the requirement of real time processing, these higher dimensional magic matrix-based methods are not advantageous. Hence, a kind of data hiding scheme based on a single or a group of multi-dimensional flexible magic matrices is proposed in this paper, whose magic matrix can be expanded to higher dimensional ones with less computing resource. Furthermore, an adaptive mechanism is proposed to reduce the embedding distortion. Adapting to the secret data, the magic matrix with least distortion is chosen to embed the data and a marker bit is exploited to record the choice. Experimental results confirm that the proposed scheme hides data with high security and a better visual quality.

• 대한가정학회지
• /
• 제35권6호
• /
• pp.205-219
• /
• 1997

FACES II & III did not capture high extremes of Cohesion and Adaptability dimension, and were linear rather than curvilinear measure. The purpose of this study was to examine reliability and validity of revised FACES using by FACES II,III,IV. Factor analysis showed that Cohesion and Adaptability dimension consisted each 3 factors(disengaged, connected, enmeshed / rigid, flexible, chaotic). Extremes on each dimension conceptually were opposite and they were uncorrelated with each other. Revised FACES effectively predicted family function. Reliability coefficients of subscales ranged form .68~.82. Revised FACES had good internal consistency, and construct and criterion related validity.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.801-805
• /
• 2009

This paper reports on a flexible flap valve actuated by electromagnetic force under a constant pressure source. The flexible flap valve consists of the three main components: a flexible flap with a steel disk embedded in PDMS, an electromagnetic actuator and two glass plates with inlet and outlet. The flap valve is fabricated by SU-8 mold process, the EDM process and oxygen plasma treatment. The dimension of an assembled flap valve is $12[mm]{\times}20[mm]{\times}28[mm]$. The stroke volume of the flap valve is measured for various pressures. And the time of the applied input voltage is varied to change the open time of the valve. When the input voltage of 30[V] is applied for 0.25[s], the minimum stroke volume of the flap valve is $40[{\mu}L]$ at 70 [kPa].

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.760-767
• /
• 2010

Even though a flexible disk grinding process was often applied to enhance the product quality, it produced non-flat zone in the beginning and the exit (end) area. Since latter area is susceptible to poor product quality with burn mark, careful analysis is required to cope with such degradation. The flexible disk grinding exit stage was analyzed for workpiece length, wheel speed, depth of cut and feed. The exit stage qualities defined as exit stage ratio and exit stage angle or slope was characterized. A neural network application results reveled that exit stage characteristics was predicted more accurately without workpiece dimension with minimum error of 1.3%.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.234-240
• /
• 2006

We study the dynamic burst assembly based on traffic prediction and offset and delay differentiation in optical burst switching network. To improve existing burst assembly mechanism and build an adaptive flexible optical burst switching network, an approach called quality of service (QoS) based adaptive dynamic assembly (QADA) is proposed in this paper. QADA method takes into account current arrival traffic in prediction time adequately and performs adaptive dynamic assembly in limited burst assembly time (BAT) range. By the simulation of burst length error, the QADA method is proved better than the existing method and can achieve the small enough predictive error for real scenarios. Then the different dynamic ranges of BAT for four traffic classes are introduced to make delay differentiation. According to the limitation of BAT range, the burst assembly is classified into one-dimension limit and two-dimension limit. We draw a comparison between one-dimension and two-dimension limit with different prediction time under QoS based offset time and find that the one-dimensional approach offers better network performance, while the two-dimensional approach provides strict inter-class differentiation. Furthermore, the final simulation results in our network condition show that QADA can execute adaptive flexible burst assembly with dynamic BAT and achieve a latency reduction, delay fairness, and offset time QoS guarantee for different traffic classes.

• 소성∙가공
• /
• 제12권2호
• /
• pp.116-122
• /
• 2003

In the Prestressed die design for cold working, many constraining conditions should be considered to insure the die safety and to improve the dimension accountancy products. Among the constraining conditions, yielding conditions, diameter ratios and interferences between rings are very important. . In this paper, therefore, flexible tolerance method was used in order to search the optimum values of design variables. The maximum inner pressure is used as objective function in this numerical analysis. In the design Process, it was also involved the safety factor to the yield strength of each ring by considering the allowable tensile or compressive hoop stress in each ring. The proposed technique has been applied to the die design of backward extrusion process, and it's analytical results have been compared with that of the conventional design method.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.213-224
• /
• 2008

트럭 축하중에 의한 도로포장체의 응력과 변형은 대부분 다층 탄성 이론에 의해 예측된다. 대부분의 다층 탄성 이론에 의한 이론적 계산값이 연성 포장 재료의 점탄성적 거동특성, 동적 트럭 축하중, 비균등 타이어 접지압 및 형상등을 해석에 고려하지 못하므로, 계측값에 비해 매우 작은 값을 예측하므로서 도로 포장 두께설계가 과소 설계될 우려가 크다. 이와 같은 도로 포장체 구조해석시 이용되는 중요한 변동요소를 포장 재료의 물성 모델 측면, 비균등 접지압 및 형상 측면, 동적 유한요소해석 측면에서 분석하여 이용 가능한 모델을 본 논문에서 제안하였다. 경계조건 및 민감도 분석을 수행을 통한 효과적인 3차원 연성포장의 유한요소해석모델을 결정하는 방법론을 제안하였으며, 최적 유한요소모델 분석결과와 현장에서 취득한 결과와의 상호비교를 통하여 모델의 유의성을 검증하였으며, 동적 접지하중조건, 점탄성물성 모델 등을 3차원 유한요소 모델에 접목하고, 최적 경계조건을 결정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.534-537
• /
• 2012

Hydroelastic effects on sloshing phenomena in a rectangular tank are numerically investigated. The dimension of the tank is $1000mm{\times}600mm$, and the filling ratio of water is 20% of tank height. One of the side walls of tank is assumed to be flexible. The tank is excited into sway motion with amplitude of 100mm and frequency of 0.53Hz that is first natural frequency of water inside the tank. Prediction results for time histories of pressure and displacement of flexible and rigid walls are compared to quantitatively assess hydroelastic effects on sloshing phenomena.

• Journal of Ship and Ocean Technology
• /
• 제5권4호
• /
• pp.19-28
• /
• 2001

A comparative study of the new flexible double hull structure is presented as a collision energy absorbing system, which is constructed with mixed stringers comprising slant and straight stringers for the double hull tanker, The dimension and disposition of this mixed stringers are selected to give the maximum absorbing energy. From the viewpoint of collision energy absorbing efficiency, this structural system is compared with three other types of the double hull constructions with trapezoidal stiffener, stringer type and standard type of VLCC, 310K DWT, Based on the constant hull weight, the proposed double hull structure with mixed stringers shows a improved crashworthiness as the results.