• 한국주거학회논문집
• /
• 제10권2호
• /
• pp.223-234
• /
• 1999

The purpose of this study was to provide basic information for future residential flooring planning by identifying differences in preference for flooring materials of livingroom by characteristics of housewives living in apartment housing and by describing their perception of residential flooring materials and by analyzing their degree of satisfaction with the current flooring materials of livingroom. For this purpose, a survey was conducted by 281 housewives who lives in apartment, and analyzed by using frequency, percentage, mean, factor analysis, χ² test, t-test, one-way ANOVA and Duncan's Multiple Range test. The results of the study were obtained as follows: 1) The most preferred flooring materials was wood in the livingroom. Also, most of the reasons for preferred this flooring materials were good for health and good texture. 2) As a result of typifying housewives' perceptions of residential flooring materials, it was classified into fashoin-pursuit type, personality-expression type, beauty-pursuit type, health-pursuit type and practicality-pursuit type. 3) In the degree of satisfaction with the current flooring materials of livingroom, wood showed the highest level of satisfaction. 4) Differences in the degree of satisfaction with the current flooring materials of livingroom by personal characteristics of residents were analyzed. As results, it was found that the group who were later stage of family life cycle and experienced in replacing the flooring materials showed higher degree of satisfaction with the current flooring materials of livingroom.

• 한국가구학회지
• /
• 제20권2호
• /
• pp.122-135
• /
• 2009

The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.32-39
• /
• 1996

The overall purpose of this study was to investigate the dimensional changes of melamine sheet laminated medium density fiberboard(MDF) floorings by sub-heating system(Ondol). This study was also conducted to improve the properties of melamine sheet laminated MDF floorings. The effects of density, resin content, manufacturing speed of MDF and types of melamine sheet on dimensional and weight changes of floorings were investigated. The results were as followings. 1. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with decreasing the density of MDF. 2. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with increasing the resin content of MDF. 3. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with decreasing the manufacturing speed of MDF. 4. Dimensional change of melamine sheet laminated MDF flooring in width direction by heating was doubled than that in machine direction. 5. Dimensional change and curling of high pressure melamine laminate(HPM) laminated MDF flooring by heating was less than those of low pressure melamine laminate(LPL) flooring. 6. Weight loss of melamine sheet laminated MDF flooring by heating has linear relationship with shrinkage.

• 교육녹색환경연구
• /
• 제12권1호
• /
• pp.25-34
• /
• 2013

As the construction industry develops, environmental pollution gets increasingly serious, giving damage including the increase of incidence of respiratory diseases and skin diseases among children with weakened immune systems, rather than adults. In daycare centers, infants and children spending much of their time, have high frequency of contact with the interior floor finish material. However, the majority of the child care centers don not use eco-friendly flooring but ordinary monorium flooring, because the initial investment cost of the eco-friendly flooring is higher than ordinary monorium flooring. Therefore, in this study, life cycle costs including the initial investment cost of the eco-friendly flooring and ordinary monorium flooring were calculated, demonstrating that the eco-friendly flooring is more economical than ordinary monorium flooring in terms of life-cycle cost. In addition, the analysis of the environmental performance also showed the excellence of the eco-friendly floor finishes. It is expected that the use of the eco-friendly floor finishes will increase due to their excellence in the aspect of life cycle cost and eco-friendly performance, through this study.

• 한국가구학회지
• /
• 제17권2호
• /
• pp.49-56
• /
• 2006

This research was carried out to examine the FIR (far-infrared rays) emissivity and emission power of five types of flooring board by the mixing ratio of charcoal and loess, and the physical property of five types of injected flooring board by the amount of mixture. Type D was appeared the most high value of FIR emissivity and emission power. But there was a little difference among the five types of flooring board values. In physical properties, control type flooring board and injected flooring board showed a similar tendency. Among the domestic trees, all of hard wood seems to be used to surface wood for strong hardness flooring board. But a coniferous tree was not.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.451-458
• /
• 2011

Adhesives derived from renewable resources allow wood panel producers to make lower cost alternatives to formaldehyde-based adhesive resins. Among them, adhesive components extracted from industrial by-products or wastes are the most important research fields in the efficient utilization of waste and cost reduction. In our study, the rapeseed flour, which is a by product from the production of biodiesel extracted from rapeseed, was introduced to develop alternative adhesives for the production of wood flooring. The rapeseed flour was hydrolyzed with 1% sodium hydroxide solution and PF prepolymers were prepared with 3-molar ratios, 1.8, 2.1 and 2.4. The linear fracture mechanics was introduced to evaluate the glue bond quality in wood flooring composed of fancy-veneered and plywood, and the formaldehyde emission and adhesive penetration were also investigated. The formaldehyde emissions of wood flooring met the requirement of the standard of $SE_0$ specified in the KS standard. The rapeseed flour adhesive penetrated sufficiently into the vessel elements and lumens in fancy veneer and plywood and gave strong bond quality to the wood flooring. The fracture mechanics was introduced to evaluate the adhesive joint between fancy veneer and plywood. The critical stress intensity factor ($K_{IC}$) of boliva overlayed wood flooring was increased with increasing molar ratio and this was the same tendency in oak overlayed wood flooring. From the results, the formulated adhesives were efficiently used to bond fancy veneer onto the plywood to make wood flooring and showed a potential to be used as a component of environmentally friendly adhesive resin systems for production of flooring.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.895-905
• /
• 2022

Composite flooring systems consisting of cold-formed steel joists and reinforced concrete slabs offer an efficient, lightweight solution. However, utilisation of composite action to achieve enhanced strength and economical design has been limited. In this study, finite element modelling was utilised to create a three-dimensional model which was then validated against experimental results for a composite flooring system consisting of cold-formed steel joists, reinforced concrete slab and steel bolt shear connectors. This validated numerical model was then utilised to perform parametric studies on the performance of the structural system. The results from the parametric study demonstrate that increased thickness of the concrete slab and increased thickness of the cold formed steel beam resulted in higher moment capacity and stiffness of the composite flooring system. In addition, reducing the spacing of bolts and spacing of the cold formed steel beams both resulted in enhanced load capacity of the composite system. Increasing the concrete grade was also found to increase the moment capacity of the composite flooring system. Overall, the results show that an efficient, lightweight composite flooring system can be achieved and optimised by selecting suitable concrete slab thickness, cold formed beam thickness, bolt spacing, cold formed beam spacing and concrete grade.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.45-53
• /
• 2008

건축 내장재 중 바닥재의 연소거동을 살펴보기 위해 열류량 $50kWm^{-2}$의 콘 칼로리미터를 이용하여 측정하였다. 7종의 국산 바닥재를 이용하여 각각의 연소 거동을 최대 열방출률과 전체 열방출량 그리고 평균 열방출률을 통해서 살펴보았다. 실험한 결과 중밀도섬유판(MDF) 바닥재가 다른 바닥재에 비해 높은 열 방출 특성을 나타났다. 또한 MDF 바닥재는 연소 시 질량의 감소가 다른 바닥재보다 더 큰 것을 확인할 수 있었다. 연소 시 발생하는 가스 발생량을 측정하였는데, PE계 섬유판(PE fiberboard flooring)과 PVC계 plastic resin sheet에서 높은 일산화탄소와 이산화탄소의 발생량을 확인할 수 있었다. 비광소멸면적을 통해서 가스 평균 방출량을 살펴보면 일산화탄소나 이산화탄소와 같은 경향을 나타났다. 바닥재의 가스유해성 평가는 쥐의 행동 정지시간을 기준으로 측정하였다. 측정 결과 MDF 바닥재에서 유해성이 높은 것으로 측정되었다.

• 한국화재소방학회논문지
• /
• 제22권2호
• /
• pp.30-37
• /
• 2008

건축용 바닥재의 화재예방을 위하여 국제규격으로 정해져 있는 바닥재 시험평가 방법인 KSISO 9239-1을 이용하여 각종 바닥재에 대한 연소성 시험을 복사열 판넬 시험기를 사용하여 실시하였다. 복사열 판넬 시험기를 이용하여 각종 바닥재에 대한 화염 전파거리, 임계 열류량 그리고 연기 발생농도 측정하였다. 측정결과 바닥재의 구성 물질 별로 서로 다른 연소특성을 나타내었으며, 바닥재의 표면 재질 및 구성성분이 열 방출과 연기 발생량에 있어 중요한 영향을 미치게 된다는 것을 확인할 수 있었다. 위의 평가방법은 화재위험성을 연구하는데 중요한 인자인 임계 열류량, 연기 발생량 및 화염 전파거리를 정량적으로 평가하는 중요한 시험방법임을 알 수 있었고 국내 건축용 바닥재 화재평가 방법을 국내실정에 맞게 제정 및 적용하는 것이 적합할 것으로 판단되었다.