• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.256-261
• /
• 2009

This study was carried out to examine the effects of cutting condition on the rooting and their subsequent growth of cut flower in plug cutting of summer-flowering chrysanthemum 'Iwanohakusen'. The more leaves were attached to the cutting, the higher shoot growth and rooting were. Shoot growth of cuttings was not affected by cutting length, but rooting was better in over 5 cm long cutting. Shoot growth was enhanced by increasing thickness of cutting, and 5.5 mm thick cutting was favored in rooting. When the many leaves were attached on the cutting, the length and weight of cut flower increased. Over 7 cm long cutting showed higher values in growth of cut flower and ray flower number. Cutting of 5.5 mm diameter showed more favorable growth of cut flower than the other treatments. Therefore, it is concluded that rooting of cutting and consecutive growth of cut flower was improved when 7 cm long and 5.5 mm diameter cutting with 4 leaves was used in plug cutting of chrysanthemum 'Iwanohakusen'.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.13-20
• /
• 2012

This study was carried out to examine the effect of cutting condition on the growth of rooted cuttings and their subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'. The more leaves were attached to the cutting, the higher shoot growth of rooted cutting was observed. Cutting with two to six leaves was effective in shoot growth and rooting than any other treatment. Shoot growth of rooted cutting was not affected by cutting length, but rooting was better in 5 to 7 cm long cutting. Shoot growth and rooting of rooted cutting was promoted by increasing the cutting diameter, and rooting was better in 3.6-4.2 mm thick cutting than 3.1 mm thick cutting. As the treating concentration of NAA increased, shoot growth was inhibited and root length shortened in rooted cutting. Soaking with $100mg{\cdot}L^{-1}$ ${\alpha}$-naphtalene acetic acid (NAA) for 1 h was effective in shoot growth and rooting. Root growth such as root number, root length, and root weight was better in rooting medium mixed with 2:2 of peatmoss:perlite than the other treatments. When rooted cutting produced from cutting with four or six leaves was planted, better length, weight, and leaf number of cut flower was observed. In rooted cutting produced with 7-9 cm long cutting, growth of cut flower such as length, weight, and ray flower number was more effective than the others. Therefore, it is recommended that the 7 cm long and 3.6 mm thick cutting with four to six leaves is used to improve their rooting and subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.244-250
• /
• 2010

This study was carried out to examine the effect of cutting condition on rooting and their subsequent growth of cut flower in plug cutting of 'Shinma', one of autumn-flowering chrysanthemums. According to the results, cutting with four or six leaves was effective in shoot growth and rooting than any other treatments, and also the length and thickness of cut flower were increased. In case of cutting with leafless, it showed the poorest shoot growth among all of the treatments and there was no root. The weight of shoot was heavier than any other treatments in case of the length of cutting (5~7 cm). And the weight of root and its number were better than any other treatments, in treatment of the length of cutting (5 cm). The growth of shoot and rooting were enhanced by increasing the thickness of cutting. In case of thickness of cutting, the cutting (3.2 mm tnickenss) showed more favorable shoot length of cut flower than any other treatment. Therefore, it is recommended that the 5 cm long and 3.2 mm thick cuttings with four leaves are used to improve their rooting and subsequent growth in plug cutting of Dendranthema grandiflorum 'Shinma'.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.33-37
• /
• 2010

Effects of cutting time of double flowered Hydragea serrata for. acuminata native to Korea on flowering and growth of following year were investigated in order to develop as a pot plant. Cuttings were carried out every 10th day from April to September in 2008. The cuttings were directly placed in 15 cm diameter pots. Longest plant was obtained from May cuttings and their average heights were 31.7 cm, and followed by April and July cuttings. Plant heights of August and September cuttings were 23.6 cm and 22.0 cm, respectively. In contrast, growth and height of June cutting were abnormally small. Leaf length, leaf width and petiole length of August and September cutting were reduced, but numbers of leaves were not changed. Average flower cluster numbers of May cuttings were 4 flower clusters, and July, August and September cuttings were 3 clusters while only 1 flower cluster per a plant was obtained during June. Biggest diameter of flower crown was observed from May cuttings and the size was 10.3 cm diameter; however, smaller flower crown size was observed after July cuttings. The best overall flower appearance was observed from May cuttings, and the worst was June cuttings. Even though plant height of August and September cuttings were reduced, flowering aspect and ornamental value were normal, but blooming times were retarded according to late cutting time.

• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.152-156
• /
• 2001

This study was conducted to investigate the flower organ removal effect on Atractylodes macrocephala Koidz which was introduced from China. The results were summarized as follows; The plant height of Flower Organ Cutting(F.O.N.C.) treatment short by 1.7∼2.5 cm compared to Flower Organ Non-Cutting(F.O.N.C.) treatment. But number of stem and stem diameter of F.0.C treatment were similar to that of F.O.N.C. treatment. The fresh weight of above-ground part of F.O.N.C. treatment was decreased 48∼60% compare to F.O.C. treatments. The later was period of F.O.C., the higher was fresh weight of above-ground part. The growth of underground part was more F.O.C. at July 15 and Aug. 20 treatments than F.O.N.D treatment. The dry rhizome yield of F.O.C. at July 15 treatment was increased 40% compare to F.O.N.D treatment. Essential oil content of F.O.C. at July 15 treatment was increased 12% compare to F.O.N.D treatment.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.4
• /
• pp.189-195
• /
• 2001

This study was carried out to investigate the effects of in vitro culture condition and among lines on growth pattern of lateral buds from nodal cuttings of Phalaenopsis flower stalks. The ratio of bud growing into shoot from nodal cuttings of flower stalks were 90.9% and 54.4% on MS and hyponex medium, respectively. The number of buds grown vegetatively were increased remarkably on the MS medium containing 5 mg/L BA. The rate of buds grown vegetatively was higher in basal and middle parts than in upper part of flower stalks. The flower stalk sections cultured at 25~28$^{\circ}C$ showed the highest ratio of vegetative growth. Medium contamination was decreased by pretreatment of etiolation to the flower stalk. However, the pretreatment did not show specific effects on shoot development and reduction of phenolic compound. Average shoot number which was formed from flower stalk segments in 27 of 30 accessions were 3.17, while high number of shoots were obtained from Phal. 3020 and Phal. 3039. The growth pattern of lateral buds in F$_1$hybrids was similar to that of their parents.

• Horticultural Science & Technology
• /
• v.16 no.4
• /
• pp.528-530
• /
• 1998

The hardwood cutting of Hibiscus syriacus was studied by using 54 different cultivars. In the evaluation of rooting ability and shoot growth, there were much differences between cultivars or groups classified by flower types. The outstanding rooting ability was found in cultivars such as 'Comte de Haimont', 'Hanol-tanshim', 'Hyangdan', 'Nabora', 'Saimdang', whereas 'Ilpyontanshim', 'Lucy', 'Paedal', 'Sohoyang' and other several cultivars showed poor characteristics in their rooting. The longest shoot was observed in 'Hanoltanshim', 'Kreider Blue', 'Nabora', 'New Hamabo', 'Nunbora', while 'Chossarang', 'Lucy', 'Shintaeyang', 'Youngkwang', etc. showed very short shoots. As a result of comparison among three different flower types, semi-doubled flower type showed the most extent of rooting ability and shoot growth.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.15-25
• /
• 2022

This study was conducted to provide useful basic data for restoration and maintenance of the Changdeokgung Palace(昌德宮)'s inner palace area in the future by exploring the background of terraced flower beds installed in the front space of Seunghwaru(承華樓) and grasping the reality before and after terraced flower beds were installed. The main results of this study can be summarized as follows. First, in the early 1900s, the front space of Seunghwaru formed a relatively higher terrain than the Nakseonjae(樂善齋) area. In addition, along the topography of high north and low south, a yard surrounded by Haenggak(行閣) and a rectangular open space connected to the West Haenggak of Nakseonjae were created. In particular, the rectangular open space was a staircase-type slope in which rectangular stone columns were arranged at regular intervals. Second, the terraced flower beds of Seunghwaru originated from the renovation of the new building of Nakseonjae West Hanggak, which was implemented in the late 1920s. This is because in order to secure enough available land for construction and auxiliary space during the renovation of the new building, the terraced flower beds for topographic treatment was created along the cutting area after cutting off the original topography of the front space of Seunghwaru. Third, after the construction of the terraced flower beds, many deformation occurred in the topographic features of the front space of Seunghwaru. The front yard of Seunghwaru was relatively higher than the Nakseonjae area, but most of them were cut off and disappeared as the terraced flower beds were created. The staircase-type also disappeared after the construction of the new building and terraced flower beds. The stylobate and front fence of Seunghwaru were newly built along the alignment of terraced flower beds and the unique style of narrow gate and auxiliary stairs were also relocated to the new fence.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.252-260
• /
• 2008

This study was conducted to observe the characteristics of mineral nutrient uptake of single-node cutting rose 'Versilla' and to determine optimal nutrient solution control method for soilless culture of 'Versilla' in a closed hydroponic system. Nutrient solution was managed by five different control methods: macro- and micro-element control in aeroponic system (M&M), macroelement control in aeroponic system (M), nutrient solution supplement in aeroponic system (S); electrical conductivity (EC) control in aeroponic system(EC-A); EC control in deep flow technique system(EC-D). The concentration of $NO_3$-N exceeds optimal range whereas P and Mg decreased at the later stage of plant growth with the EC control method, EC-A and EC-D. The overall mineral nutrient content increased with S. On the other hand the nutrient content at the root environment was maintained optimal with M&M and M. The nutrient solution control methods had significantly effect on the cut-flower quality. In the M&M and M, flower length, fresh weight and root activity were higher than those with the other mineral nutrients control methods. The maximal efficiency of photochemistry (Fv/Fm) was higher for M&M, M and S than that with EC-A and EC-D. Based on the above results, it is highly recommended to control nutrient solution by mineral nutrient control methods (M&M and M) in a closed hydroponic system for single-node cutting rose, 'Versillia'.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.96-102
• /
• 2011

The objective of study was carried out to find a proper entrance date for breaking dormancy depending on cutting and entrance date into greenhouse investigating plant growth and flowering characteristics of chrysanthemum 'Baekma'. Days to visible bud formation and days to flowering were increased as cutting date was delayed. The flowering rate of cutting on September 18 was 100% while cutting on October 30 did not induce flower bud formation. Flower characteristics were surveyed after 'Baekma' and 'Jinba' rooted cuttings were planted on September 10. Branching formation rate of 'Baekma' was gradually increased as entrance date was delayed while that of 'Jinba' was about 70-80% regardless of entrance date. Lethality of 'Baekma' moving into greenhouse on December 20 was 1.5% by cold injury. 'Jinba' started to die on November 10 by cold injury and lethality of 'Jinba' moving into greenhouse on December 20 was 21.7%. Thus, lethality of 'Jinba' was about 5-14 times higher than that of 'Baekma'. Days to visible bud formation and days to flowering were decreased as entrance date was delayed in chrysanthemum 'Baekma'. Days to visible bud formation of entrance date on November 10 and December 10 were 67.9 and 50.3, respectively. On the other hand, that of 'Jinba' was increased until entrance date on December 10 and decreased on December 20. Based on these results, it was suggested that dormancy of 'Baekma' was started at late September and completed at late October.