• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.484-491
• /
• 1990

A heat-flux meter has been designed and manufactured to measure the heat flux from the flame. A calibration method of the heat-flux meter by a calibration furnace has also been proposed. The k-type (Chromel-Alumel) thermocouple material has been used as the material for the beat-flux meter. The electormotive force (e.m.f.) from the K-type thermocouple is shown to be linearly proportional to the heat flux absorbed. The characteristics of the heat-flux meter become better as the radius of heat absorbing disk becomes larger and its thickness thinner.

• Journal of Magnetics
• /
• 제8권4호
• /
• pp.160-163
• /
• 2003

In magnetic flux measurement, output voltage drift of electronic integrator is an essential problem. In this work, we have developed a new kind of Miller type integrator using a sample and hold amplifier. Input bias current was measured and this value was hold in the sample and hold amplifier, after that input bias current of Miller integrator was compensated automatically using the value which holds in the sample and hold amplifier. Developed flux-meter shows the drift of flux-meter are smaller than 10$^{-5}$ Wb/min in full scale of 10$^{-2}$, and we could also measure multi-channel magnetic flux simultaneously.

• 한국자기학회지
• /
• 제15권6호
• /
• pp.332-335
• /
• 2005

자속계의 경우 입력전압을 적분하여야 되기 때문에 연산증폭기의 입력 바이어스 전류가 있으면 적분기의 출력이 드리프트하게 된다. 본 연구에서는 이 드리프트를 자동으로 측정하고 보상하기 위하여 전압변동이 없는 디지털 sample and hold증폭기를 자속계에 도입하여 제작하였다. 개발한 자속계의 경우 적분기의 시간상수 $RC=10^{-3}$ s에서 드리프트가 $5{\times}10^{-8}\;Wb/s$ 이하였다.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.923-928
• /
• 1986

본 논문에서는 열전도율이 큰 금속의 스크랩과 파라핀을 혼합한 축열 매질에 있어서 스크랩의 체적 혼합율에 따르는 열전도율의 변화를 모델링과 실험으로 구해서 축열 계산에 필요한 열전도율 자료를 제시하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.912-916
• /
• 2001

Fluxmeter is a measuring instrument the magnetic flux intensity by means of an integration of the voltage induced to a search coil to unit time. It also is required to a precise integrator since the voltage induced to a search coil has a differential value of the flux ${\Phi}$ to unit time. In this study, a bias current which is a main problem of the integrator in a drift troublesome depending on the temperature of a FET is investigated. We have confirmed that the temperature dependence of both the bias current of a integrator using the FET and the reversal saturated current of the minor carrier in a P-N junction of a semiconductor were the same. The property of a commercial integrator goes rapidly down with increasing temperature. The bias current of a FET is increased twice as much with 10$^{\circ}C$ increment. As a result, the low drift integrator could be developed by setting the lower temperature up with a pottier device.

• 설비공학논문집
• /
• 제25권8호
• /
• pp.471-476
• /
• 2013

The present study has been carried out to elucidate the optimal method for the performance test of a refrigerator vacuum insulation panel (VIP), by using numerical heat transfer analysis. Three locations of heat flux meter have been tested, for deriving the best test method to clarify the normal or the abnormal condition of the vacuum insulation panel in a refrigerator. The first location of the heat flux sensor is at the same place as the heater, the second one is at the nearby side location of the heater and the third one is at the opposite side location of heater in the refrigerator. The heat flux and $1/q^{{\prime}{\prime}^2}$ or $q^{{\prime}{\prime}^4}$ were calculated for the cases with the normal VIP, and with the abnormal VIP, and their differences analyzed. From the present study, the first and the second method had a mere difference characteristics of heat flux and $1/q^{{\prime}{\prime}^2}$ or $q^{{\prime}{\prime}^4}$, between the cases with the normal or the abnormal VIP. The magnitude of the heat flux after 300sec had a great difference between the cases with the normal or abnormal VIP for the third method, and it could be considered the most optimal method to test the performance of a refrigerator vacuum insulation panel.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.937-944
• /
• 2004

An experimental study has been conducted to evaluate the effects of $CO_2$ on heat transfer from oxygen-enriched hydrogen flame. Experiments were performed on flames stabilized by a co-flow swirl burner, which was mounted on top of the furnace. Five different oxidizer compositions were prepared by replacing $N_2$ with $CO_2$. In a steady state, the total as well as radiative heat flux from the flame to the wall of furnace have been measured using a heat flux meter. Temperature distribution in furnace also has been measured and compared. By increasing $CO_2$ proportion in the oxidizer, the convection played a more significant role rather than radiation. Overall temperature in the furnace was seen to be decreased, while the total heat flux has increased.

• 자원환경지질
• /
• 제53권5호
• /
• pp.543-552
• /
• 2020

본 연구는 플로리다 주 Silver Springs 유역 내 카르스트 대수층의 지하수 플럭스를 측정하기 위해 플럭스미터(passive flux meter)와 단공희석시험(borehole dilution test)을 수행하였다. 또한 카르스트 대수층 내 분포하는 두 영역인 암반 매질(matrix)과 균열암반 매질(non-matrix)에 따른 플럭스미터의 성능도 함께 평가하였다. 그 결과 유속이 낮은 암반 매질 영역에서는 플럭스미터의 측정값(5.96 ± 1.75 cm/day)이 단공희석시험의 측정값(4.68 ± 2.99 cm/day)과 유사하게 나타났다. 반면, 유속이 빠른 균열암반 매질 영역에서는 플럭스미터의 측정값(9.94 ± 0.90 cm/day)과 단공희석시험의 측정값(1817.37 ± 1795.50 cm/day)이 큰 차이를 보였다. 이와 같은 결과는 지하수가 플럭스미터 내부 흡착제를 완전히 통과한다고 가정하였으나, 빠른 지하수 플럭스(>11 cm/day)를 가진 균열암반 매질 영역의 경우 지하수가 플럭스미터의 활성탄 담체를 통과하지 못하고 플럭스미터와 관측공 사이의 공간으로 우회하여 흐르기 때문으로 판단된다. 따라서 기존의 플럭스미터는 11 cm/day 이하의 지하수 플럭스 측정에 적합하며, 지하수 플럭스가 11 cm/day 이상인 대수층에서 사용할 수 있는 새로운 플럭스미터의 개발이 필요할 것으로 생각된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2123-2125
• /
• 1997

In the induction motor control, the rotator flux estimation methods are used in the implement vector control of the induction motor instead of the potentical-meter or tacho-meter, a system is very sensitive in noise. In this paper, the parameters that do not affect the stablity of the system were applied in Off-Line tuning methods. In case of the rotator resistor that is sensitive. On-Line tuning methods applied in the steady state. We ascertained that the utility of a theory applied in stator flux orientation vector control through the simulation.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.131-134
• /
• 2002

In this work, we have developed a systematic way of utilizing the basic design tools for superconductive electronics. This include WRSPICE, XIC, margin program, and L-meter. Since the high performance analog-to- digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Single Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an 1-bit analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. Based on this circuit we performed margin calculations of the designed circuits and optimized circuit parameters. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter. Circuit inductors were adjusted according to these calculations and the final layout was obtained.