• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.68-69
• /
• 2014

Production of freeform concrete segments use various molds because of the unique shape of it unlike common concrete segments. As a result, the mold for freeform concrete segments cannot be reused. Therefor, cost overrun is occurred by needs of more time and manpower to produce the freeform concrete segments compared with common concrete segments. To prevent the cost overrun, a new production method for the freeform concrete segments is needed to develop and the requirements for it should be analyzed before. Therefor, the aim of this study is requirements analysis for production of freeform concrete segment. The requirements of production of freeform concrete segments and form for it is analyzed in this study. The result of this study would be used to suggest the new production method of freeform concrete segments.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.66-67
• /
• 2014

Design and construction of freeform building technologies are being implemented to reduce time and cost due to the development of materials and equipments. However, production of freeform concrete segments takes much more time and manpower than typical due to disposable mold and various shape. Therefore, manufacturing technology of freeform concrete segments need to be developed for securing economic and constructive feasibility. The objective of this study is development of efficient casting technology for freeform concrete segments in a short time. This technology includes details about the fluidity of concrete and the sectional shape of freeform concrete segments. And problem of cost and time can be solved. Also, mold can be reusable and freeform concrete segments will be produced quickly and accurately. After this study, productivity study for validation will continue through prototype development and example application.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2014

Recently freeform buildings which are free from simple shape are implemented depending on improvement of construction method. However, freeform buildings are spent more time and cost to materialize than typical form. Because molds for production of freeform shape cannot be reused. For these reasons, low productivity, delay of construction schedule and budget overflow are occurred. Thus, technology of molds need to be developed for manufacturing of freeform concrete segments. The objective of this study is manufacturing of freeform concrete segments using rod type mold. This technology can implement not only application to various shape but also mass production. Thus, problems of construction period, productivity and cost can be solved. After this study, productivity analysis should be continued through the field application.

• 한국건축시공학회지
• /
• 제18권1호
• /
• pp.89-98
• /
• 2018

최근 비정형 건축물의 관심과 수요가 증가하면서 비정형 건축물 시공기술에 관한 중요도가 높아지고 있다. 그러나 국내의 비정형 콘크리트 부재 시공기술은 거푸집으로 제작하는 것에 많은 시공기간과 공사비용이 소요된다. 따라서 본 연구에서는 비정형 콘크리트 부재 생산 시 생산기간을 단축하고 비용을 절감할 수 있는 LOM 방식의 3D 프린터를 이용한 비정형 콘크리트 부재 생산 프로세스를 제시하고, Mock-up test를 통해 생산프로세스의 타당성을 검증하였다. 연구결과, 본 생산 프로세스는 기존 강재 거푸집을 이용한 시공기술 대비 약 47.8% 제작기간 단축 효과와 56.2%의 비용절감 효과가 나타났다. 본 연구의 결과인 3D 프린터를 이용한 비정형 콘크리트 부재 생산 프로세스는 비정형 콘크리트 부재 생산의 생산성 향상을 비롯한 비정형 건축물 시공의 새로운 공법활성화에 기여할 것으로 기대된다.