• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1468-1471
• /
• 2005

This Paper is to find out a solution for the full-coverage algorithm requiring the real-time processing such as mobile home service robots and vacuum cleaner robots. Previous methods are used by adopting based grid approach method. They used lots of sensors, a high speed CPU, expensive ranger sensors and huge memory. Besides, most full-coverage algorithms should have a map before obstacle avoidance. However, if a robot able to recognize the tangent vector of obstacles, it is able to bring the same result with less sensors and simplified hardware. Therefore, this study suggests a topological based approach and a local obstacle voidance method using a few of PSD sensors and ultra sonic sensors. The simulation results are presented to prove its applicability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1941-1960
• /
• 2019

Unmanned aerial vehicles (UAVs), acting as mobile base stations (BSs), can be deployed in the typical fifth-generation mobile communications (5G) scenarios for the purpose of substantially enhancing the radio coverage. Meanwhile, UAV aided underlay device-to-device (D2D) communication mode can be activated for further improving the capacity of the 5G networks. However, this UAV aided D2D communication system is more vulnerable to eavesdropping attacks, resulting in security risks. In this paper, the D2D receivers work in full-duplex (FD) mode, which improves the security of the network by enabling these legitimate users to receive their useful information and transmit jamming signal to the eavesdropper simultaneously (with the same frequency band). The security communication under the UAV coverage is evaluated, showing that the system's (security) capacity can be substantially improved by taking advantage of the flexible radio coverage of UAVs. Furthermore, the closed-form expressions for the coverage probabilities are derived, showing that the cellular users (CUs)' secure coverage probability in downlink transmission is mainly impacted by the following three factors: its communication area, the relative position with UAV, and its eavesdroppers. In addition, it is observed that the D2D users or DUs' secure coverage probability is relevant to state of the UAV. The system's secure capacity can be substantially improved by adaptively changing the UAV's position as well as coverage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2013

This study examined the effects of the occlusal stability and a partial coverage mouthguard on physical fitness and motor capacity to determine the importance of the occlusal stability as a possible action mechanism of mouthguards on physical performance. Twenty physical education students were included for measurements of their handgrip strength, back strength, whole body reaction time, flexibility, sidestep test, stork stand test and jumping test according to the following 5 different occlusal conditions: mouth closed position without a mouthguard, with a full coverage mouthguard, with a right partial coverage mouthguard, with a left partial coverage mouthguard and with anterior partial mouthguard. The results revealed no significant difference in any of the measured physical factors between the occlusal conditions with and without a full-coverage mouthguard. On the other hand, a significant difference was observed in whole body reaction between the occlusal conditions with and without the partial coverage mouthguards. Therefore, isokinetic muscle tests on both knee joints and the Wingate anaerobic power test should be performed under the following five occlusal conditions: with or without full-coverage maxillary custom-made mouthguard, with a unilateral right or left partial-coverage maxillary mouthguard and with an anterior partial-coverage maxillary mouthguard. These results suggest that the partial coverage mouthguard had a short-term beneficial effect on agility rather than full coverage mouthguard.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.385-389
• /
• 1997

We report on the development of a new method to control the coverage of a metal film prepared with immersion method. An Sb species in solution adsorbed irreversibly at an open circuit potential (∼0.2 V) as an oxygenous Sb(Ⅲ) on a clean Au electrode, and the adsorbates showed voltammetric features in the potential range from 0.1 V to - 0.4 V. The full coverage of the Sb adsorbates was ∼0.45. On the contrary, the Sb species in solution did not adsorb at all on iodine-covered Au electrode surfaces, when the iodine coverages were more than 0.25. As the iodine coverage decreased below 0.25, however, the irreversible adsorption of Sb took place and the coverage of Sb increased accordingly. This electrochemical behavior has been interpreted as the penetration of the adsorbing Sb species in solution through open spaces among the iodine adlattices of coverages less than 0.25. With the manipulation of the iodine coverage, the controllable range of Sb coverage was from 0 to 0.45, i.e. the full coverage of Sb. In addition, the reversible deposition of Sb on an iodine-saturated Au electrode with voltammetric scan has been observed, which is contrasted with the adsorptive behavior of Sb on the clean Au electrode.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.388-395
• /
• 2013

PURPOSE. The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS AND METHODS. This study included 20 male subjects to perform the isokinetic muscle tests and the Wingate anaerobic power test on both knee joints under five closed-mouth conditions: without or with 4 types of mouthguards with thickness of 2 mm based on premolar area: (1) full-coverage, (2) anterior partial-coverage, (3) right posterior partial-coverage, and (4) left posterior partial-coverage. The obtained results were subjected to One-way ANOVA with repeated measures, followed by post hoc test of the contrast method (${\alpha}$=.05). RESULTS. There was no significant difference between the closed position with and without a full-coverage mouthguard in all variables. However, significant differences were observed between with and without a partial-coverage mouthguard in muscular endurance during extension of the left knee, muscular power and endurance during flexion of the right knee. Additionally, significant differences were found between occlusal states with full- and partial-coverage mouthguards in muscular power and endurance during extension of the left knee. CONCLUSION. These findings indicate the elevation of vertical dimension by 2 mm or the inducement of occlusal stability had little effect on isokinetic muscle strength and anaerobic performance, while uneven distribution of occlusal force might have some positive effects.

• Anayses & Alternatives
• /
• v.4 no.1
• /
• pp.89-103
• /
• 2020

The "rule of law" decision of the Fourth Plenary Session of the 18th Central Committee of the Communist Party of China proposes to build a strict supervision system of the rule of law. The reform of the national supervision system launched in 2016 can be described as an important measure to build such a system. The supervision and supervision system has gradually become the core system of the rule of law supervision system. Its full coverage of supervision of public officials is conducive to preventing corruption of public power and achieving the ultimate goal of supervision by the rule of law. The supervision mechanism in the supervision system under the rule of law requires systemic thinking to realize the effective supervision of public officials of the state power organs, as well as the constraints and supervision of other supervision systems, including the supervision of the People's Congress; Supervision is a full-coverage supervision, and other rules of law supervision systems are also full-coverage supervision systems within their scope of competence. Therefore, gradually exploring and constructing an external supervision system for supervision will be conducive to the optimization and eventual completion of the rule of law supervision system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.6-12
• /
• 2001

Korea government decided to provide the NDGSP service and the conceptional design report are presented here. The coverage of the exiting MDGPS stations of inland area is measured and the positions and characteristics of additional inland NDGPS sites are proposed for the full-coverage of inland areas of Korea.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.7-12
• /
• 2001

Korea government decided to provide the NDGSP service and the conceptional design report are presented here. The coverage of the exiting MDGPS stations of inland area is measured and the positions and characteristics of additional inland NDGPS sites are proposed for the full-coverage of inland areas of Korea.

• Korean Journal of Head & Neck Oncology
• /
• v.31 no.1
• /
• pp.5-8
• /
• 2015

Backgrounds: The purpose of this study was to compare full thickness skin graft with inguinal skin to split thickness skin graft for coverage of the radial forearm free flap donor site. Patients and Methods: 25 patients who was reconstructed with radial forearm free flap for head and neck cancer were reviewed retrospectively. Results: The graft loss rates of full thickness skin graft were less than split thickness skin graft or split thickness skin graft with dermal substitutes. The recovery times of donor site and skin graft donor site of full thickness skin graft were also shorter than split thickness skin graft or split thickness skin graft with dermal substitutes. Skin texture and aesthetic results of donor site were improved and complications as itching and pain sensation were decreased. Conclusion: Full thickness skin grafts with inguinal skin should be considered for patients requiring a radial forearm free flap.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.85-93
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-retained overdenture. MATERIALS AND METHODS. Maxillary implant-retained overdentures with 4 implants placed in the anterior region of edentulous maxilla were converted into a 3-D numerical model, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional finite element analysis. RESULTS. In all experimental models, the highest stress was concentrated on the most distal implant and implant supporting bone on loaded side. The stress at the most distal implant-supporting bone was concentrated on the cortical bone. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant and implant supporting bone on loaded side. CONCLUSION. It could be suggested that when making maxillary implant retained overdenture, using Hader bar instead of milled bar and full palatal coverage rather than partial palatal coverage are more beneficial in distributing the stress that is applied on implant supporting bone.