• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.4
• /
• pp.49-55
• /
• 2011

This study proposes proportions of functional areas in the ward of general hospitals, which are derived from 5 big university hospitals in order to establish the ward area standard for hospital design. The results of this paper are as follows. First, functional areas of hospital ward are composed of bedroom area, nursing area, training area, service area, and common area. Of course common area can be divided into first common area and secondary common area. The first common area(inter departmental common area) includes lobbies, elevator lobbies, corridors, restroom, and mechanical shafts. The secondary common area means the common area within special department such as ward or radiology department. Second, a standard method of calculating ward areas has been proposed: the standard is based on the center line of the wall between functional areas. Third, the proportions of 6 functional areas in ward are suggested.

• Journal of the Korean Mathematical Society
• /
• v.60 no.2
• /
• pp.375-393
• /
• 2023

Rabinowitz action functional is the Lagrange multiplier functional of the negative area functional to a constraint given by the mean value of a Hamiltonian. In this note we show that on a symplectization there is a one-to-one correspondence between gradient flow lines of Rabinowitz action functional and gradient flow lines of the restriction of the negative area functional to the constraint. In the appendix we explain the motivation behind this result. Namely that the restricted functional satisfies Chas-Sullivan additivity for concatenation of loops which the Rabinowitz action functional does in general not do.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.204-211
• /
• 2021

We report, synthesis of high surface area composite carbon aerogel using additive based polymerization technique by incorporating graphitic porous carbon as additive. This additive was separately prepared using sol-gel polymerization of resorcinol-furfuraldehyde in iso-propyl alcohol medium at much above the routine gelation temperature to yield porous carbon (CA-IPA) having graphitic layered morphology. CA-IPA exhibited a unique combination of meso-pore dominated surface area (~ 700 m²/g) and good conductivity of ~ 300 S/m. The composite carbon aerogel (CCA) was synthesized by traditional aqueous medium based resorcinol-formaldehyde gelation with CA-IPA as additive. The presence of CA-IPA favored enhanced meso-porosity as well as contributed to improvement in bulk conductivity. Based on the surface area characteristics, CCA-8 composition having 8% additive was found to be optimum. It showed specific surface area of ~ 2056 m²/g, mesopore area of 827 m²/g and electrical conductivity of 180 S/m. The electrode formed with CCA-8 showed improved electrochemical behavior, with specific capacitance of 148 F/g & ESR < 1 Ω, making it a better choice as super capacitor for energy storage applications.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.18 no.4
• /
• pp.7-16
• /
• 2012

Purpose : The purpose of this study is to look into the change of area and space organization percentage of wards in main general hospitals in Busan and Gyeongnam. Method : Patient area, nursing area, service area, training area, common area were classified for functional space organization. Patient area was reclassified to bedroom and comfort area, and common area was reclassified into vertical circulation, horizontal circulation and facility area. Also, method of area calculation was chosen standard to wall center-lines following building act 911 and functional space area of each hospital was estimated and comparatively analyzed. Result : For hospitals completed before 2000, area ratio by functional space for patient area, nursing area, service area and common area showed 53.6%, 10.2%, 0.8%, and 35.3% respectively. For hospitals completed after 2000, area ratio by functional space for patient area, nursing area, service space, and common area showed 49.2%, 12.6%, 1.1%, and 37.2% respectively. Implications : Through this study, change of percentage of space organization of main general hospitals in Busan Gyeongnam can be understood. Also because most studies on area organization of general hospital wards were focused on the capital area, this study provides basic material for future studies related to area of general hospital wards in Busan Gyeongnam.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.278-284
• /
• 2018

Plant functional traits have been shown to be useful to understand how and why ecosystems and their components vary across environmental heterogeneity or gradients. This study investigated how plant functional (leaf) traits vary according to an elevation-associated environmental gradient. Environmental gradients (mean annual temperature and precipitation) were quantified, and leaf traits (leaf area, specific leaf area, leaf nitrogen, leaf phosphorus, leaf carbon, and leaf C/N ratio) of the understory woody plant species Acer pseudosieboldianum were examined across an elevational gradient ranging from 600 to 1200 m in a Baegunsan Mountain in Gwangyang-si, Jeollanam-do, South Korea. The results showed that mean annual temperature and precipitation decreased and increased along with elevation, respectively. Leaf area of the plant species decreased slightly with increasing elevation, while specific leaf area did not differ significantly. Leaf nutrients (nitrogen, phosphorus, and carbon concentrations) were higher at high elevations, but leaf C/N ratio decreased with elevation.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.4
• /
• pp.219-223
• /
• 2009

Objective : Functional magnetic resonance imaging (fMRI) is frequently used to localize language areas in a non-invasive manner. Various paradigms for presurgical localization of language areas have been developed, but a systematic quantitative evaluation of the efficiency of those paradigms has not been performed. In the present study, the authors analyzed different language paradigms to see which paradigm is most efficient in localizing frontal language areas. Methods : Five men and five women with no neurological deficits participated (mean age, 24 years) in this study. All volunteers were right-handed. Each subject performed 4 tasks, including fixation (Fix), sentence reading (SRI. pseudoword reading (PR), and word generation (WG). Fixation and pseudoword reading were used as contrasts. The functional area was defined as the area(s) with a t-value of more than 3.92 in fMRI with different tasks. To apply an anatomical constraint, we used a brain atlas mapping system, which is available in AFNI, to define the anatomical frontal language area. The numbers of voxels in overlapped area between anatomical and functional area were individually counted in the frontal expressive language area. Results : Of the various combinations, the word generation task was most effective in delineating the frontal expressive language area when fixation was used as a contrast (p<0.05). The sensitivity of this test for localizing Broca's area was 81 % and specificity was 70%. Conclusion : Word generation versus fixation could effectively and reliably delineate the frontal language area. A customized effective paradigm should be analyzed in order to evaluate various language functions.

• Korean Journal of Community Nutrition
• /
• v.16 no.1
• /
• pp.98-112
• /
• 2011

This study aimed to suggest a 1300 scale of a middle school foodservice facility floor plan which was compliant to the principle of HACCP, as well as ensuring food and work safety, and the flow of personnel and food materials. which consisted of 46 nutrition teachers and 6 experts, responded with a questionnaire on the relationship of functional area and space. Using their opinions, key principles for the design of the facility were single direction movement of food materials, customers and workers; minimization of the cross-contamination through the separation of functional space; and securement of customer-focused efficiency; staff-centered convenience and efficiency; and work and food safety. After the completion of an adjacency diagram, bubble diagram and program statement, the functional areas of a 1300 scale middle school food-service facility were allocated as follows: $9.9\;m^2$ for the receiving area, $56.1\;m^2$ for the pre-preparation area, $10.5\;m^2$ for the food storage area, $6.0\;m^2$ for the supplies storage area, $97.8\;m^2$ for the cooking area, $33.6\;m^2$ for the service area, $52.5\;m^2$ for dish washing area, cafeteria $410.5\;m^2$, $4.5\;m^2$ for the front room, for a total of $725.8\;m^2$. Expert groups have pointed to limitations within this model as there are no windows in the office for the influx of fresh outside air and a need for the straight line installation of steam-jacket and frying kettles on the sides of windows. This study can be useful as the guidelines for estimating the investment cost of the facility and placing the placement of functional areas and equipment in the renovation of the facility. It can be also useful data for a methodology of foodservice facility design.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.474-487
• /
• 2009

The principal objectives of this study were to evaluate the space, equipment, and institution rate by functional area, and to suggest appropriate types, numbers, and equipment capacity by school foodservice size for optimal employee job performance and efficiency. Data were collected and administered by 263 dietitians who attended elementary and middle schools in Gyeonggi Province, and the data were analyzed using SPSS statistical software. Among a total of 72 respondents who provided usable data, 31 (48.6%) respondents were nutrition teachers and 37 (51.4%) were part-time dietitians. The majority of the respondents reported that their foodservices were self-operating types (94.4%), and 8 meals out of 10 meals provided over a 2-week period were served as normal meals, defined as meals consisting of Bab, Kook, Kimchi, and 3 side dishes (73.6%). The mean kitchen space was $186.25\;m^2$ for 500 meals/day, $269.7\;m^2$ for 501 to 1,000 meals/day, $249.1\;m^2$ for 1001 to 1500 meals/day, and $274.87\;m^2$ for 1,500 or more meals/day. The mean space of functional areas was $11.52\;m^2$ for office, $12.63\;m^2$ for storeroom, $9.55\;m^2$ for receiving area, $27.23\;m^2$ for pre-preparation area, $149.9\;m^2$ for cooking area, $18.33\;m^2$ for assembly/service area, $45.50\;m^2$ for dishwashing area, and $17.20\;m^2$ for locker room. Only two pre-preparation and cooking spaces increased significantly with increasing size of school foodservice (p<0.05). Office, cooking area, and locker room were allocated in all foodservices. However, the pre-preparation area (68.7%), receiving area (56.5%), assembly/service area (38.1%), and dishwashing area (37.7%) were lowly installed in the surveyed facilities. Through a focus group meeting discussing the results of this study, appropriate equipment and its dimensions were suggested according to functional areas and foodservice scales. Future studies will be necessary to allocate the appropriate space by functional area with the proposed equipment requirements for optimally efficient decision making in equipment purchasing.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.47-60
• /
• 2019

Purpose: Regional public hospitals have implemented functional reinforcement projects, and the facilities to accommodate them have increased in size. Nevertheless users in hospital are concerned about space shortage and area imbalances. Therefore I will trace the factors and trends that influence the size, and derive the relationship between these and the uses' critical opinion. Methods: Among the indicators for determining the size of medical facilities, the number of beds and total floor area are the essential indicators that directly affect the composition of space and allocation of area inside the medical facility. The purpose of this study is to investigate the change and the factors of change on the these two indicators in regional public hospitals and analyze the trend of changes. Results: In accordance with support undertaking, regional public hospitals have been increased the number of chronic-based beds and expanded additional facilities such as O.P.D specialized centers, emergency centers and funeral homes for reflecting the needs of the regions and times. However, as a result of analyzing the area, regional public hospitals are growing in size mainly on the ward and O.P.D is only expanded the scope of functional reinforcement division but total area level of O.P.D is lower than the recent level. In addition, the levels of D&T, Supply, mechanical/electrical equipment area related to medical support and control environment quality are very low. This is because the functional reinforcement projects have been done without concerning diagnose the whole facility. Implications: If functional reinforcement projects are conducted, to cope with problems of space shortage and imbalance of area, it is judged that an architectural planning that comprehensively analyzes existing facilities and related departments should be included.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.1
• /
• pp.45-54
• /
• 2018

Objective: The purpose of this study was to investigate the effect of foot strengthening exercise program and functional insoles on joint angle and plantar pressure in elderly women. Thirteen elderly women who were enrolled in a university senior citizens academy of a metropolitan city in 2017 were divided into two groups: exercise group with functional insole (n=7) and exercise group without functional insole (n=6). Method: Three-dimensional motion analysis and Pedar-X were performed to compute the joint angle and the foot plantar pressure, respectively. Two-way repeated measure ANOVA was conducted to compare dependent variables within and between groups. The significance level was set at ${\alpha}=.05$. Results: The range of motion (ROM) of the ankle, knee, and hip joints in the exercise group with functional insole increased significantly more than the exercise group without functional insole. In both the experimental group and the comparison group, the maximum foot plantar pressure and the mean foot plantar pressure were decreased, but the comparison group without functional insole showed more decrease. Since the experimental group demonstrated greater pressure than the comparison group in the contact area (forefoot, midfoot), it was distributed over a greater area. Conclusion: The results of this study suggest that participation in foot strengthening exercises and using a functional insole has more positive effects than foot strengthening exercises alone on the joint angle and plantar pressure in elderly women. Increased foot plantar pressure led to an increased contact area (forefoot, midfoot) for distribution of the foot plantar pressure, but the effect of reducing the maximum and average plantar pressures was incomplete. However, wearing functional insoles along with exercise, could help in improving the stability of the joints, by increasing the range of motion, and could help the elderly in movement of the muscles more effectively, leading to an improvement in gait function.