• The International Journal of Costume Culture
• /
• v.12 no.1
• /
• pp.38-51
• /
• 2009

The goal of this study is to define the types of the lifestyles of senior consumers and identify the differences in the properties of apparel products and the apparel attitudes. To collect the data for this study, questionnaires for the research were distributed from November 20, 2006 to December 15, 2006 to those over 50 living in Seoul, Pusanand Kyunggi and 302 questionnaires were used for the data analysis. The results of the study are as follows. First, six factors were extracted which were "Pursuit of Self-development", "Pursuit of Active Life", "Pursuit of Material", "Pursuit of Diversity", "Pursuit of Family-oriented" and "Pursuit of Recreational Life" after factor analysis of lifestyles recognized by the senior consumers that participated in this study. Second, the lifestyles of the senior consumers were categorized into "Consumption-oriented Type", "Personal Satisfaction-oriented Type", "Family Weighted Type" and "Recreation-oriented Type." Third, three factors were extracted which were "Symbolical Property", "Functional Property" and "Customer Support Property" after conducting the factor analysis on the properties of apparel products. Fourth, significant differences were shown in apparel properties by the lifestyle types of senior consumers in the symbolical property and the customer support property. The "symbolical property" was shown highest in "recreation-oriented type" and lowest in the "family weighted type." The customer support property was shown highest in the "family weighted type" and lowest in the "recreation-oriented type", showing the opposite result. Fifth, significant differences were shown in apparel attitudes by the lifestyle types of senior consumers in "Fashion Innovativeness", "Apparel Involvement" and "Apparel Necessity." The "fashion innovativeness" was shown highest in the "recreation-oriented type" and lowest in the "family weighted type." The apparel involvement and the necessity for apparel for senior citizens was shown high in the "recreation-oriented type" and this showed that the senior consumers valuing recreation also value fashion, have high apparel involvement and feel the necessity for apparel for senior citizens.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.357-364
• /
• 2007

This research is to set a direction on the recycle of Discarded Automotive tires reforming them into heavy metal adsorbents by developing a particular functional group inducing formation of Chelate complexes with heavy metal ion in the water, on the surface of the used tire conventionally turned into powdered form. For this purpose, through FT-IR, XRD, XRF, SEM, elution test we confirmed and analyzed the property of newly reformed scrapped tires, and functional group. Also, by Kinetics Study we produced an invariable value applying to absorption models. Conclusively the absorption preference of heavy metal is determined to be $Pb^{2+}>Cu^{2+}>Cd^{2+}$, and it reached absorption balance within first 30 minutes, also the absorption reaction time increased from 0.27 to $1.78\sim3.15(g/mg{\cdot}min)$, and showed more than 80% of removal efficiency. This result proved that the efficiency increased by 10 times compared with the conventional powdered Discarded Automotive tires, and the Discarded Automotive tire which implemented the Functional group can exhibit a great efficiency as heavy metal adsorbent.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.182-186
• /
• 2015

We investigated that effects of annealing ambient on the characteristics of functional nano thin film synthesized on glass substrate. The functional nano thin films were annealed by using rapid thermal annealing (RTA) equipment in vacuum, oxygen and nitrogen ambient, respectively. The hardness of the functional nano thin films were measured by a standard hardness testing method (ASTM D3363) such as a H-9H, F, HB and B-6B pencil (Mitsubishi, Japan). Also, the adhesion of the functional nano thin films were measured by a standard adhesion testing method (ASTM D3359) using scotch tape (3M, Korea). The contact angle of the functional nano thin films was measured by a contact angle analyzer (Phoenix 300 Touch, S.E.O.). The optical property of functional nano thin films was measured via UV-visible spectroscopy (S-3100, Scinco).

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.3
• /
• pp.141-149
• /
• 2008

Most functional programming languages allows programmers to write ambiguous rules, under the strategy that pattern-matching will be performed in a direction of 'from top to bottom' way. While providing programmers with convenience and intuitive understanding of defining default rules, such ambiguous rules may make the semantics of functional languages unclear. More specifically, it may fail to apply the equational reasoning, one of most significant advantage of functional programming, and may cause to obscure finding a formal way of translating functional languages into the ${\lambda}$-calculus; as a result, we only get an ad hoc translation. In this paper, we associate with separability of term rewriting systems, holding purely-declarative property, pattern-matching semantics of lazy functional languages. Separability can serve a formalism for translating lazy functional languages into the ${\lambda}$-calculus.

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.114-118
• /
• 2008

Functional nanomaterial is expected to have improved capacities on various fields. Especially, metal nanoparticles dispersed in polymer matrix and metal nanofiber, one of the functional nanomaterials, are able to achieve improvement of property in the electric and other related fields. In this study, the fabrication of metal (Ag) nanoparticle dispersed nanofibers were attempted. The Ag nanoparticle dispersed polymer nanofiber and Ag nanofiber were fabricated by electrospinning method using electric force. First, PVP/$AgNO_3$ nanofibers were synthesized by electrospinning in $18{\sim}22kV$ voltage with the starting materials (Ag-nitrate) added polymer (PVP; poly (vinylpyrrolidone)). Then Ag nanoparticle dispersed polymer nanofibers were fabricated to reduce hydrogen reduction at $150^{\circ}C$ for 3hr. And Ag nanofibers were synthesized by the decomposited of PVP at $300{\sim}500^{\circ}C$ for 3hr. The nanofibers were analyzed by XRD, TGA, FE-SEM and TEM. The experimental results showed that the Ag nanofibers could be applied in many fields as an advanced material.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.596-602
• /
• 2008

Ovotransferrin (OTf) was phosphorylated by dry-heating in the presence of pyrophosphate at pH 4.0 and $85^{\circ}C$ for 1 and 5 d, and the functional properties of phosphorylated OTf (PP-OTf) were investigated. The phosphorus content of OTf increased to 0.91% as a result of phosphorylation and the electrophoretic mobility of PP-OTf also increased. Although the solubility of dry-heated OTf slightly decreased, the decrease was reduced by phosphorylation. The stability against heat-induced insolubilization of OTf was somewhat improved by phosphorylation, but more than 70% of PP-OTf was insolubilized when it was heated at $70^{\circ}C$ for 10 min at pH 7.0. However, heat-induced insolubilization of PP-OTf was reduced when it was heated in the presence of phosphorylated ovalbumin. This may explain the excellent stability of phosphorylated egg white protein against heat-induced insolubilization which was reported previously. The emulsifying property of OTf was also somewhat improved by phosphorylation. The calcium phosphate-solubilizing ability of PP-OTf was enhanced. Although the degree of phosphorylation of OTf by dry-heating in the presence of pyrophosphate was similar to that of ovalbumin, the improvement of properties of PP-OTf was considerably different from those of phosphorylated ovalbumin.

• Journal of the Korean Society of Safety
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2021

To simulate a process model in the field of chemical engineering, it is very important to identify the physical properties of novel materials as well as existing materials. However, it is difficult to measure the physical properties throughout a set of experiments due to the potential risk and cost. To address this, this study aims to develop a property prediction model based on the group contribution method for aromatic chemical compounds including benzene rings. The benzene rings of aromatic materials have a significant impact on their physical properties. To establish the prediction model, 42 important functional groups that determine the physical properties are considered, and the total numbers of functional groups on 147 aromatic chemical compounds are counted to prepare a dataset. Support vector regression is employed to prepare a prediction model to handle sparse and high-dimensional data. To verify the efficacy of this study, the results of this study are compared with those of previous studies. Despite the different datasets in the previous studies, the comparison indicated the enhanced performance in this study. Moreover, there are few reports on predicting the physical properties of aromatic compounds. This study can provide an effective method to estimate the physical properties of unknown chemical compounds and contribute toward reducing the experimental efforts for measuring physical properties.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 2002.05a
• /
• pp.215-215
• /
• 2002

Catalytic subunit of pyruvate dehydrogenase phosphatase (PDPc) has been suggested to have three major funational domains such as dihydrplipoamide adetyltransferase(E2)-binding domain, regulatory subunit of PDP(PDP)r-binding domain, and calcium-binding domain. In order to identify functional domains, recombinant catalytic subunit of pyruvate dehydrogenase phosphatase(rPDPc) was expressed in E. coli JM101 and purified to near homogeneity using the unique property of PDPc: PDPc binds to the inner lipoyl domain (L2) of E2 of ppyruvate dehydrogenase complex (PDC) in the presence of Ca+2, not under EGTA. PDPc was limited-proteolysed by typsin, chymotypsin, Arg-C, and elastase at pH 7.0 and 30C and N-terminal analysis of the fragments was done. Chymotrypsin, trypsin, and elastase made two major fragments: N-terminal large fragment, approx. 50kD and C-terminal small fragment, approx.10 kDa. Arg-C made three major fragments: N-terminal fragment, approx. 35kD, and central fragment, approx. 15 kD, and C-terminal fragment, approx. 10 kD. This study strongly suggest that PDPc consists of three major functional domains. However, further study should be necessary to identify the functional role.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.14-22
• /
• 2016

The objective of this study is to develop eco-friendly, functional towel material utilizing cotton-Modal-chitosan blended(C-M-CH) yarn and natural dyeing with mugwort colorants. Dyeing properties of towels with mugwort colorants were studied by investigating the effect of dyeing conditions including concentration of mugwort colorants, dyeing temperature, and dyeing time, and the effects of mordants on dye uptakes were investigated. The C-M-CH towel showed better dye uptake than 100% cotton towel with mugwort colorants. The shade of towels got darker and red-yellowish tint increased by mordanting. Comparing with 100% cotton towel, the colorfastness of dyed C-M-CH towel was satisfactory showing above 3 grade which is the lowest grade to washing fastness. The antibacterial activity against Staphylococcus aureus and deodorization performance of towels were excellent and improved by dyeing with mugwort colorants. From the results obtained, it is concluded that the cotton-Modal-chitosan blended towel dyed with mugwort colorants can be used practically for an eco-friendly and multi-functional towel materials with excellent absorbance and drying properties.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.471-476
• /
• 2007

Various active microwave imaging techniques have been developed for cancer detection for past several decades. Both the microwave tomography and the UWB radar techniques, constituting functional microwave imaging systems, use the electrical property contrast between normal tissues and malignancies to detect the latter in an early development stage. Even though promising simulation results have been reported, the understanding of the functional microwave imaging diagnostics has been relied heavily on the complicated numerical results. We present a computationally efficient and physically instructive analytical electromagnetic wave channel models developed for functional microwave imaging system in order to detect especially the breast tumors as early as possible. The channel model covers the propagation factors that have been examined in the previous 2-D models, such as the radial spreading, path loss, partial reflection and transmission of the backscattered electromagnetic waves from the tumor cell. The effects of the system noise and the noise from the inhomogeneity of the tissue to the reconstruction algorithm are modeled as well. The characteristics of the reconstructed images of the tumor using the proposed model are compared with those from the confocal microwave imaging.