Various grain refining alloying elements such as Sr, TiB, and Ca were added to AZ91D and their effects on the mechanical properties and mold filling ability were investigated. The average grain sizes of those alloys were significantly reduced by the small amounts of the alloying elements. Ca addition was the most remarkably effective in reducing the grain size, however it was found to deteriorate the mold filling ability and tensile properties. TiB addition was observed to be the most efficient for both grain refinement and mold filling.
Amylogram properties such as peak viscosity, hot viscosity, cool viscosity, breakdown, pasting consistency and setback were investigated by the Rapid Visco Analyzer and interpreted by the relationship among amylogram properties according to the varietal groups classified by the rapidity of grain filling (RGF) which was calculated by the percentage of grain weight at 15 days after heading to 40 days after heading. The 164 rice recombinant inbred lines from the cross of Milyang23 and Gihobyeo were used to get the basic information regarding the amylogram properties. The used recombinant inbred lines could be grouped into 4 varietal groups such as slow maturing (less than 40% of RGF), mid-slow maturing (41-60% of RGF),mid-fast maturing (61-80% of RGF), and fast maturing (more than 81% of RGF) groups based on the RGF. The peak viscosity and setback showed regular tendency according to the varietal groups classified by the RGF. Positive significant correlations were found between pasting consistency and setback, however negative significant correlations were found between breakdown and setback in all varietal groups.
Proceedings of the Korean Society of Crop Science Conference
/
2023.04a
/
pp.51-51
/
2023
Global warming has significant effects on the growth and development of wheat and can cause a reduction in grain yield and quality. Grain quality is a major factor determining the end-use quality of flour and a reduction in quality can result economic losses. Therefore, it is necessary to study the physiological characteristic of wheat to understand its response to temperature elevation, which can aid in the development of strategies to mitigate the negative effects of high temperature and sustain wheat production. This study investigated the effects of elevated temperature on grain characteristics and quality during the grain filling period of two Korean bread wheat cultivars Baekkang and Jokyoung. These two bread wheat cultivars were subjected to an increasing temperature conditions regime; T0 (control), T1 (T0+1℃), T2 (T0+2℃) and T3 (T0+3℃). The results showed that high temperature, particularly in T3 condition, caused a significant decrease in the number of grains per spike and grain yield compared to the T0 condition. The physical properties, such as grain weight and hardness, as well as chemical properties, such as starch, protein, gluten content and SDSS, which affect the quality of wheat, were changed by high temperature during the grain filling period. The grain weight and hardness increased, while the grain size not affected by high temperature. On the other hand, amylose content decreased, whereas protein, gluten content and SDSS increased in T3 condition. In this study, high temperature within 3℃ of the optimal growth temperature of wheat, quantity properties decreased while quality-related prosperities increased. To better understand the how this affects the grain's morphology and quality, further molecular and physiological studies are necessary.
This study was conducted to know the variation and relationship of rice grain quality and starch pasting properties by transplanting times. Two early maturing rice cultivars which accounted for the most area of early maturing rice cultivar in Chungnam province were used. The experiment was laid out in a split-plot design with 3 replications. The main plot consisted of three transplanting times viz. early (April 25), ordinary (May 25) and late (June 25) with sub-plots containing two cultivars. According to the transplanting times, most of rice grain quality and starch pasting properties showed significant difference and Joami showed higher grain quality than Unkwang in all transplanting times. Especially, rice grain quality was improved when transplanted late, showing high head rice and glossiness of cooked rice due to the lower mean temperature during grain filling stage. Glossiness of cooked rice was positively correlated with head rice ratio, amylose content and setback value, and negatively correlated with chalky rice ratio and protein content. The highest positive and negative correlation were observed between breakdown value and peak viscosity ($r=0.98^{**}$), and breakdown and setback ($r=-0.94^{**}$), respectively. These results provide some information for rice researchers and producers producing cultivars with an improved quality, suggesting that rice quality is highly influenced by temperature at grain filling stage, and transplanting times is crucial in improving rice quality. In addition, starch pasting properties are useful for determining rice quality because rice grain quality and starch pasting properties are dependent on each other.
The lost foam casting process was used to fabricate Al-Si-Mg cast specimens, and the effects of the chemical composition and process variables on the tensile properties and the mold filling ability were investigated. Some porosity formation was observed in thick sections of the casting and better tensile properties were obtained for thin sections, presumably because of their lower porosity and the higher cooling rate. Tensile properties were not clearly enhanced by grain refining treatment with Ti; however, the elongation was significantly improved by Sr modification of the Al-Si-Mg alloy. The mold filling distance was generally proportional to the pouring temperature of the melt, and the distance was also increased by the addition of Ti.
Studies on the occurrence of rice preharvest sprouting (PHS) have primarily focused on temperature and rainfall duration at the time of PHS induction, but average temperature during grain filling can have a great influence on PHS. This study analyzed the effect of average temperature during grain filling on PHS occurrence and subsequent changes in grain quality after PHS. For two consecutive years, average temperature differences during grain filling were produced by varying the transplanting date. Artificial rainfall was treated under identical accumulated temperatures of 1200℃ after heading. It was confirmed that the occurrence of PHS was higher under high average temperature conditions during grain filling. In addition, the degree of grain quality reduction caused by PHS occurred more severely under high temperature conditions during grain filling. In order to reduce the risk of PHS occurrence and subsequent quality damage, it is important to control the planting date to avoid high-temperature conditions during grain filling.
Kim, Ki-Young;Ko, Jong-Cheol;Shin, Woon-Cheol;Park, Hyun-Su;Baek, Man-Kee;Nam, Jeong-Kwon;Kim, Bo-Kyeong;Lee, Jeom-Ho
KOREAN JOURNAL OF CROP SCIENCE
/
v.59
no.2
/
pp.174-180
/
2014
This study was conducted to know the effect of low radiation during grain filling stage of rice on its grain yield, components, physicochemical properties and palatability, compared to the effect of natural light. Ripened grain ratio, 1000 grain weight of brown rice, milled rice yield of Mipum, Hopum, and Sindongjin were reduced as the shading treatments become higher. After harvest, physicochemical properties of rice influencing eating quality were investigated. Protein content of milled rice was increased, but palatability was decreased by shading treatments. Change of milled rice proteins and palatability due to shading treatments were found to be less in Mipum than that in Hopum and Sindongjin. With regard to amylogram properties, shading treatments resulted in a significant decrease in peak trough final breakdown viscosities of rice flour, though it increased pasting temperature and setback viscosity. The degree of the 55% shading effect was more intensive than the 35% shading effect in changes of ripened grain ratio, 1000 grain weight of brown rice, milled rice yield and milled rice protein.
Kim, Jeong-Min;Lee, Jae-Cheol;Choi, Jin-Young;Cho, Jae-Ik;Choe, Kyeong-Hwan
Journal of Korea Foundry Society
/
v.37
no.6
/
pp.186-192
/
2017
The lost foam casting method was used to fabricate Al-Si alloy thin sheet specimens; the effects of chemical composition and process variables on the mold filling and mechanical properties were investigated. The mold filling capability was observed to be proportional to the pouring temperature, and both the vibration imposed during the casting and the application of a pattern coating had rather negative effects. The mold filling capability also decreased with the addition of Mg or TiB. When the Mg content increased, the tensile strength of the cast alloy was enhanced, but the elongation decreased. However, after T6 heat treatment, both the strength and the elongation were improved. TiB addition for grain refining or pattern coating did not significantly affect the tensile properties.
The processing of rice is one of the measures to expand the scope of rice use in response to the decrease in rice consumption. Since the main ingredient of rice processing is rice flour, "rice flour varieties" have been bred with the aim to improve the productivity and quality of rice flour. In order to study the variation in the ripening characteristics of rice flour varieties with respect to temperature, the average temperature after heading date was set at 28℃ (33/23℃), 22℃ (27/17℃), and 18℃ (23/13℃) inside the phytotron. We used Saenuri as non-glutinous rice variety, Seolgaeng as soft-type rice flour variety, and Baromi2 as powdered rice flour variety. At high temperatures (28℃), the grain weight of Baromi2 decreased by 21%. Its starch content also decreased by more than 10%, which was significantly lower than that of Saenuri and Seolgaeng. At low temperatures (18℃), the grain weight and starch content slightly increased or were similar in all varieties. An analysis of changes in the grain weight due to effective accumulated temperature through the sigmoid function showed that the velocity of grain-filling slowed significantly when Baromi2 was exposed to low temperature during the ripening stage compared to the other varieties. Therefore, the transplanting time of Baromi2 should be delayed to avoid high temperatures during the ripening stage. However, because the ripening period is not properly secured under low temperature conditions, grain filling may not be sufficient.
This study was carried out to get the basic informations regarding the varietal variations for the physicochemical properties such as protein content, amylose content, fatty acid content, grain quality values and color properties such as lightness value, chroma and hue for the 164 recombinant inbred lines(RILs) of Milyang 23 and Gihobyeo(M/G) at the experimental farm in the Sangji University. The principal component analysis and heritability study were conducted for this experiments. The rapidity of grain filling(RCF) for the 164 M/G RILs could be classified into four groups such as slow maturing group less than 41%, mid-slow maturing group 41∼60%, fast maturing group 61∼80% and very fast maturing group more than 81% based on the rapidity of grain filling rate. The slow maturing group of RGF showed a little bit higher protein content 9.1%, compared to the other RGF groups. However, the amylose content of all the RGF groups revealed the same content by the groups. The very fast maturing group of RGF showed longer grain length in brown rice compared to other RGF varietal groups, in case of grain width in brown rice showed shorter than any other groups. The alkali digestive value which was so much related to gelatinization temperature showed 3.40 degree at fast maturing group of RGF in M/G RILs. However, the very fast maturing group of RGF revealed 4.31 degree of alkali digestive value. The principal component analysis was performed by the chemical and color properties such as quality value, protein content, amylose content, alkali digestive value, fatty acid content, lightness value, chroma and hue for M/G RILs. The first principal component was able to explained upto 36% to total informations. It was corresponded to quality value, protein content, amylose content, fatty acid content, lightness value and a-value(green -1 red). The characters regarding grain quality showed high heritable properties more than 75% of heritability, but color characters appeared relatively lower heritability compared to grain quality.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.