• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.118-127
• /
• 2007

SAW(Submerged Arc Welding) process is generally applied to a wide range of welding area in the fabrication of steel structure. This process has a good characteristic properties such as the high quality of welds and the high deposition rates, but in case of welding on a thick steel plate, it also has higher cold crack susceptibility than that of a thin steel plate. The purpose of this research is to find the main factor of crack generation and clarify the countermeasure for crack prevention, and then establish the optimum welding condition in a heavy thick steel plate. The results of this study are as follows, 1. The cause of crack generation is found the diffusible hydrogen penetrated into weld metal by decomposition of the remained moisture in SAW flux during welding. 2. For the removal of diffusible hydrogen, the raw materials of SAW flux are to be dehydrated at the high temperature in the initial manufacturing stage. 3. Mechanical properties of weld metal welded with the dehydrated SAW flux were evaluated very excellent, furthermore the weld metal has been proved to have low diffusible hydrogen content with 3.1ml /100g. 4. The weldability and quality welded with thick steel plates were improved by establishing the new optimum welding condition.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.73-78
• /
• 2011

Weldability, especially HAZ cold cracking, weld metal solidification cracking, and HAZ liquation cracking susceptibilities, of ASTM A356 CA6NM martensitic stainless steel casting was investigated and compared with that of 9-12% Cr ferritic steel castings. Irrespective of the Cr and Ni content in the castings, the HAZ maximum hardness increased with an increase of carbon content. CA6NM steel, which has the lowest carbon content, had the lowest HAZ hardness and showed no cold cracking in y-slit cracking tests. CA6NM steel, meanwhile, showed the largest weld metal solidification cracking susceptibility in varestraint tests because of its higher amount of impurity elements, phosphorus, and sulfur. All castings investigated had good high temperature ductility in hot ductility tests and showed little difference in liquation cracking susceptibility.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.69-75
• /
• 2013

Miscanthus has received wide attention as an option for biomass production in Korea, recently. New strain of giant miscanthus has been developed and was planted in two large trial sites (184 ha) in the lower reaches of the Geum River. To evaluate the susceptibility of the giant miscanthus as an bioenergy crop for the future, we investigated the influence of the giant miscanthus on the soil properties. The particle size, CEC, pH, EC, T-N, T-P, heavy metal total concentration, and heavy metal fractions of soil samples collected from abandoned field, 1 year old giant miscanthus field (1st Year GM), and 2 year old giant miscanthus field (2nd Year GM) at different depths of 0~15, 15~30, and 30~45 cm in April and August were analyzed. Results showed that the CEC and pH of the soil of the giant miscanthus field were lower than those of the soil of abandoned field. The EC of 2nd GM was lower than that of abandoned field, indicating that the giant miscanthus may facilitate soil desalination process. The organic and sulfide fraction and residual fraction of heavy metals in the giant miscanthus field was higher than in abandoned field, due to the low pH of the giant miscanthus field and the excretion of phytosiderophores by rhizome of the giant miscanthus. This study showed that the giant miscanthus can influence on the soil properties and further study for long term is needed to elucidate the interaction between the soil and the giant miscanthus.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.211-216
• /
• 2002

To investigate transition region in welded overlay relating to disbonding crack, the effect of vanadium addition on disbonding of Cr-Mo steels overlay welded with austenitic stainless steel was studied. V modified Cr-Mo steels have a higher resistance to disbonding than V free Cr-Mo steel. One reason is due to the fact that fine vanadium carbide precipated in base metal traps hydrogen and thus decreases the susceptibility to the disbonding. The second is related to the higher stability of the vanadium and stable carbides formed during PWHT, in which the carbon diffusion to the interface is lower than for V free Cr-Mo steel. Decreasing the carbon content at the interface of the weld overlay shows good resistance to the disbonding. Hence, it is important to control the carbon content at the interface of the weld overlay.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.57-67
• /
• 1999

Welding is widely applicable and reliable process and is mainly adopted for fabricating heavy structures. Recently, weld metal transverse cracks in butt and fillet weld joint is a serious problem, and they must be eliminated for improving weld joint reliability. The weld metal transverse crack susceptibility of butt and fillet joint was carried out by cantilever type tensile crack testing jig and CTS test. In this view of point, this study investigated the potential factors for weld metal transverse crack. The main results obtained were as follows: 1. The content o fdiffusible hydrogen in weld metal played an important role for weld metal transverse cracks. 2. From cantilever type tensile crack tests, it was pointed out that the higher the diffusible hydrogen content and tensile restraint, the more susceptible to weld metal transverse craking. 3. The TSN(thermal severity number) and diffusible hydrogen were important factors for determining weld metal transverse cracks in fillet weld joints.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.281-295
• /
• 2010

This paper deals with magnetic susceptibility, mineralogy, soil properties (pH, EC, CEC, loss on ignition), iron and manganese oxides, the content and partitioning of heavy metals (As, Cd, Cr, Cu, Ni, Pb, Zn), and their mutual relationship in the soil samples of an unpolluted, abandoned mine area, and industrial complex area. The various minerals derived from weathered bedrock were identified by X-ray diffraction in the unpolluted soil samples, except for the magnetic minerals. XRD analysis also revealed the existence of hematite and magnetite related to mine tailings and waste rocks in the abandoned mine area samples. The industrial complex area samples had carbonate minerals, such as calcite and dolomite, that might be due to anthropogenic deposition. The sum of the reducible, oxidizable, and residual fractions was over 80% for the abandoned mine area samples and over 50% for the industrial complex area samples using the sequential extraction method. The industrial complex area samples had a relatively high carbonate fraction that was associated with carbonate minerals. The content of aqua regia-extractable Fe, Mn, As, and Zn had a high positive correlation with the content of the dithionite-citrate-bicarbonate (DCB)-extractable method related to Fe/Mn oxide phases. The 54% and 58% of aqua regia-extractable Fe and As content, respectively, acted together with the concentrations of the DCB-extractable phases. Magnetic susceptibility values of total samples ranged from 0.005 to $2.131{\times}10^{-6}m^3kg^{-1}$. The samples including iron oxide minerals, such as hematite and magnetite, had a high magnetic susceptibility. The magnetic susceptibility showed a significant correlation with the heavy metals, Cd (r=0.544, p<0.05), Cr (r=0.714, p<0.01), Ni (r=0.645, p<0.05), Pb (r=0.703, p<0.01), and Zn (r=0.496, p<0.01), as well as Fe (r=0.608, p<0.01) and Mn (r=0.615, p<0.01). The aqua regia-extractable Fe and Mn content had a significant positive correlation with Cd, Cr, Cu, Ni, and Zn. However, the DCB-extractable Fe and Mn content had a significant positive correlation with As and Ni, indicating that the heavy metals were associated with Fe and Mn oxide minerals.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.41-45
• /
• 2008

Effectsof carbon content on the weldability of B-containing 620 grade high Cr ferritic cast steels were investigated. Cast steel with lower carbon content of 0.07% showed lower HAZ hardness because of the formation of lower carbon martensite in HAZ. It also showed less solidification cracking susceptibility in weld metal because of the formation of delta ferrite. However, hot ductility showed no difference between cast steels with lower and higher carbon contents. Cast steel with lower carbon content showed greater HAZ softening after PWHT in the region heated between AC1 and AC3 because of its higher base metal hardness.

• Toxicological Research
• /
• v.32 no.3
• /
• pp.195-205
• /
• 2016

This study was performed to select single nucleotide polymorphisms (SNPs) related to the body burden of heavy metals in Koreans, to provide Korean allele frequencies of selected SNPs, and to assess the difference in allele frequencies with other ethnicities. The candidate-gene approach method and genome-wide association screening were used to select SNPs related to the body burden of heavy metals. Genotyping analysis of the final 192 SNPs selected was performed on 1,483 subjects using the VeraCode Goldengate assay. Allele frequencies differences and genetic differentiations between the Korean population and Chinese (CHB), Japanese (JPT), Caucasian (CEU), and African (YIR) populations were tested by Fisher's exact test and fixation index ($F_{ST}$), respectively. The Korean population was genetically similar to the CHB and JPT populations ($F_{ST}$ < 0.05, for all SNPs in both populations). However, a significant difference in the allele frequencies between the Korean and CEU and YIR populations were observed in 99 SNPs (60.7%) and 120 SNPs (73.6%), respectively. Ten (6.1%) and 26 (16.0%) SNPs had genetic differentiation ($F_{ST}$ > 0.05) among the Korean-CEU and Korean-YIR comparisons, respectively. The SNP with the largest $F_{ST}$ value between the Korean and African populations was cystathionine-${\beta}$-synthase rs234709 ($F_{ST}$: KOR-YIR, 0.309; KOR-CEU, 0.064). Our study suggests that interethnic differences exist in SNPs associated with heavy metals of Koreans, and it should be considered in future studies that address ethnic differences in heavy-metal concentrations in the body and genetic susceptibility to the body burden of heavy metals.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.203-214
• /
• 1990

A total of 166 strains of Salmonella (S) typhimurium var copenhagen isolated from pigeons (164 strains) and aquatic birds (2 strains) were examined for the biochemical characteristics and plasmid profiles. All the strains were sensitive to ampicillin, chloramphenicol, gentamicin, kanamycin and sulfadimethoxine. But 13 strains(7.8%) were resistant to streptomycin (Sm), 2 (1.2%) to tetracycline, 2 (1.2%) to rifampicin, and 1 (0.6%) to nalidixic acid. Among drug resistant strains, only one strain resistant to Sm contained conjugative R plasmid which was fertility inhibition and incompatibility group $I_{\alpha}$. All the strains were sensitive to cobalt chloride, cupric sulfate, lead nitrate, mercuric chloride and silver nitrate. Of 166 isolates, 6 (3.6%) were resistant to sodium arsenate and 1 (0.6%) to potassium tellurite. Among 166 isolates, 1 (0.6%) was colicinogenic, 12 (7.2%) sucrose fermenters, and 166 (100%) maltose fermenters. Plasmid profiles were confirmed as being 4 or 5 plasmids, and their molecular weight ranged 3.2 to 60 megadalton (MD). All the strains harbored 60 Md plasmid. There are three patterns by the plasmid profile, 150 isolates (90.4%) were pattern I (3.2, 3.5, 33, 60Md), 14 (8.4%) pattern II (3.2, 3.5, 29, 60Md), and 2 (1.2%) pattern III (4.2, 7.8, 8.5, 15, 60Md). S typhimurium var copenhagen strains containing 60Md plasmid were resistant to killing by 90% normal guinea pig serum.