• 한국연소학회지
• /
• 제11권2호
• /
• pp.28-36
• /
• 2006

A constant volume combustion chamber was used to investigate the combustion characteristics. of homogeneous charge of methane-air mixture under various initial pressure, equivalence ratio and ignition times. The constant volume combustion chamber(CVCC) mostly has been studied by the experiments of visualization until now. So it is needed the numerical analysis of fluid and combustion characteristics in chamber by the more detail simulation. In this paper, the numerical analysis is tried to approach basically the homogeneous charge combustion phenomena under the various conditions, and the combustion phenomena in chamber is numerically analyzed by the commercial FIRE code. As a results, the combustion phenomena which were mean temperature, OH radical and reaction rate in chamber were investigated and it showed that the smallest flame growth occurs for the lean state and the increase of initial charged pressure condition due to the reduced OH radical.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.371-380
• /
• 2006

수신안테나 다양성을 쓰는 직접수열 부호분할 다중접속 시스템에서 의사잡음 부호를 획득할 때 평균값, 큰값, 그리고 작은값 일정 오경보 확률 처리기의 성능 특성을 균질 잡음 환경에서 얻고 견주어 본다. 균질 잡음 환경에서는 평균값 일정 오경보 확률 방법이 성능이 가장 좋고 큰값 일정 오경보 확률 방법은 평균값 일정 오경보 확률 방법과 성능이 거의 같다는 것을 모의실험으로 보인다. 이 논문의 2부에서는 비균질 잡음 환경에서 부호획득에 알맞게 평균값, 큰값, 그리고 작은값 일정 오경보 확률 처리기를 다룬다.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.17-23
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyze the heat quantity of homogeneous charge methane-air mixture under various initial pressures, excess air ratios and ignition times. As the overall pressure increase, the values of maximum combustion pressure, maximum heat release rate and cumulative heat release have been increased. But it is not very meaningful to compare with some values such as maximum combustion pressure, maximum heat release rate and cumulative heat release for different overall pressure due to the different heat energy of supplied fuel. So the each value is needed to be compared with normalized value, which is divided by the entered fuel energy. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. As the overall pressure increase, the CHR ratios and the UHC ratios have been decreased, while the HL ratios have been increased. The CHR ratio of 300 ms has the higher value than that of 10000ms, and the HL ratios of 300 ms have a lower value.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.181-188
• /
• 2002

Water flow rate into the tunnel usually determined by numerical analyses and mathematical formulas using water levels and permeability is obtained only a few limited districts of the whole tunneling site. However, underground is not a homogeneous but complicated mass. Therefore these methods can't reflect structural and geological aspects. In this study, assuming that the mountain stream in droughty season is to be the same as baseflow of its basin, hydrological method is applied to predict the constant water flow rate into the tunnel on construction field. Prediction of constant water inflow rate is performed on each section of tunnel construction field divided into 20 sections.

• Journal of Electrochemical Science and Technology
• /
• 제4권2호
• /
• pp.71-80
• /
• 2013

The study of methyl viologen ($MV^{2+}$) mediated oxygen reduction in electrolytic ethanol media possesses potential application in the electrochemical synthesis of hydrogen peroxide mainly due to the advantages of the much increased solubility of molecular oxygen ($O_2$) and high degree of reversibility of $MV^{2+/{\bullet}+}$ redox couple. The diffusion coefficients of both $MV^{2+}$ and $O_2$ were investigated via electrochemical techniques. For the first time, $MV^{2+}$ mediated $O_2$ reduction in electrolytic ethanol solution has been proved to be feasible on both boron-doped diamond and micro-carbon disc electrodes. The electrocatalytic response is demonstrated to be due to the radical cation, $MV^{{\bullet}+}$. The homogeneous electron transfer step is suggested to be the rate determining step with a rate constant of $(1{\pm}0.1){\times}10^5M^{-1}s^{-1}$. With the aid of a simulation program describing the EC' mechanism, by increasing the concentration ratio of $MV^{2+}$ to $O_2$ electrochemical catalysis can be switched from a partial to a 'total catalysis' regime.

• 한국수학사학회지
• /
• 제13권2호
• /
• pp.87-94
• /
• 2000

This paper investigates history and modern developments concerning spatial decay estimates for solutions in a semi-infinite cylinder or strip, in which model equations are defined with appropriate homogeneous lateral boundary conditions and initial conditions but left end boundary data are assumed. Our aim is to show this Saint-Venant type decay rate dependent critically on the Poincare constant resulting from characterizing variational principles.

• 한국통신학회논문지
• /
• 제31권7C호
• /
• pp.725-734
• /
• 2006

이 논문의 1부에 이어, 수신안테나 다양성을 쓰는 직접수열 부호분할 다중접속(direct-sequence code division multiple access: DS/CDMA) 시스템에서 의사잡음(pseudonoise: PN) 부호를 획득할 때 평균값(cell average: CA), 큰값(greatest of: GO), 작은값(smallest of: SO) 일정 오경보 확률(constant false alarm rate: CFAR) 처리기의 성능 특성을 비균질 (nonhomogeneous) 잡음 환경에서 얻고 견주어 본다. 균질 잡음 환경에서와는 다르게, 비균질 잡음 환경에서는 큰값 일정 오경보 확률 처리기가 가장 성능이 좋고, 평균값 일정 오경보 확률 처리기가 그 다음으로 성능이 좋다는 것을 볼 수 있다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1264-1272
• /
• 2016

The accurate estimation of leak rate through cracks is crucial in applying the leak before break (LBB) concept to pipeline design in nuclear power plants. Because of its importance, several programs were developed based on the several proposed flow models, and used in nuclear power industries. As the flow models were developed for a homogeneous pipe material, however, some difficulties were encountered in estimating leak rates for bimaterial pipes. In this paper, a flow model is proposed to estimate leak rate in bimaterial pipes based on the modified Henry-Fauske flow model. In the new flow model, different crack morphology parameters can be considered in two parts of a flow path. In addition, based on the proposed flow model, a program was developed to estimate leak rate for a crack with linearly varying cross-sectional area. Using the program, leak rates were calculated for through-thickness cracks with constant or linearly varying cross-sectional areas in a bimaterial pipe. The leak rate results were then compared and discussed in comparison with the results for a homogeneous pipe. The effects of the crack morphology parameters and the variation in cross-sectional area on the leak rate were examined and discussed.

• 한국통신학회논문지
• /
• 제17권7호
• /
• pp.719-729
• /
• 1992

본 논문은 레이다 목표물 검파에 유용한 MXTM(maximum trmmed mea)-CFAR(constant false alarm rate) 처리기를 제안하고, 성능분석을 통하여 기존의 CFAR 처리기와 비교하였다. 제안된 MXTM-CFAR처리기는 클러터경계에서 좋은 성능을 갖는 GO(greatest of)-CFAR 처리기와 균질 또는 비균질상황에서 좋은 성능을 갖는 기존의 순서통계에 근거한 TM-CFAR 처리기를 결합한 형태이다. 균질상황, 간섭표적상화 및 클러터경계에서 구한 검파확률, 오경보율과 임계치를 통하여 성능을 분석하고 기존의 CFAR 처리기와 비교하였다. 제안된 처리기는 균질상황과 간섭표적상화에서 OS(order statistics)및 TM-CFAR 처리기와 같은 성능을 유지하면서 클러터 경계에서 오경보율을 줄일 수 있어으며 처리시간을 단축 시킬 수 있었다.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.86-96
• /
• 2007

A direct-injection stratified-charge(DISC) engine has been considered as a promising alternative in spite of high unburned hydrocarbon emission levels during light load operation. In this paper investigation is made to characterize formation and combustion processes of stratified mixture charge in a simple constant volume combustion chamber. Both experimental and numerical analyses are performed for fluid and combustion characteristics with 3 different induction types for rich, homogeneous and lean mixture conditions. The commercial code FIRE is applied to the turbulent combustion process in terms of measured and calculated pressure traces and calculated distributions of mean temperature, OH radical and reaction rate. It turns out that the highest combustion rate occurs for the rich state condition at the spark ignition location due to existence of stoichiometric mixture and timing.