• 대한치과교정학회지
• /
• 제20권1호
• /
• pp.135-156
• /
• 1990

This study was undertaken to investigate the difference of chin morphology and mandibular form in relation to different mandibular growth direction. The subject was divided into three group i.e., control group, vertical group, and horizontal group, according to the criteria of $Bj{\ddot{o}}rk$ sum, and each group was composed of 15 females and 15 males. Medial axis analysis in addition to the routine cephalometric analysis using P.I.A.S. (personal image analysing system) was carried out to find out the differences of mandibular morphology on each group. The results were as follows: 1. The area of symphysis was larger in horizontal growth group than that of vertical growth group. 2. Protruding chin area was also larger in horizontal growth group than that of vertical growth group. 3. There was a close correlationship between protruding chin area and other form of mandible. 4. Antegonial notch depth and ramus posterior contour depth was deeper in vertical growth group than in horizontal growth group, and antegonial notch depth was more influenced by anterior part of notch than posterior part of notch. 5. Mental medial axis and incisal medial axis length, in relation to corpus medial axis length was larger in vertical growth group than in horizontal growth group.

• Journal of Plant Biology
• /
• 제33권4호
• /
• pp.285-292
• /
• 1990

In order to elucidate the formation of reaction tissues during the transition from primary to secondary growth, the developmental anatomy was conducted in the first internode of Ginkgo biloba seedling in horizontal position. The righting of the horizontal first internode took place at the middle portion and gradually proceeded to the base during the primary growth. Reaction tissues were formed corresponding to the righting movement in the horizontal first internode. During the transition from primary to secondary growth, compression wood was gradually developed on the lower side only. The anatomical features of compression wood also extended longitudinally to the lower side of the vertical portion where it coincided with the lower side of the horizontal first internode occurs acropetally from basal to apical portion. Eventually, some of the anatomical features of compression wood occurred at the primary growth. And the typical compression wood is gradually established during the secondary growth. On the other hand, the lower side tracheid and ray were longer and higher than those of the upper side in the horizontal first internode. However, difference in the width of ray was not observed between the lower and upper sides.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.187-194
• /
• 2002

It has been reported that cracks in mechanical joints is generally under mixed-mode and there is critical inclined angle at which mode I stress intensity factor becomes maximum. The crack propagates in arbitrary direction and thus the prediction of crack growth path is needed to provide against crack propagation or examine safety. In order to evaluate the fatigue life of cracks in mechanical joints, horizontal crack normal to the applied load and located on minimum cross section is major concern but critical inclined crack must also be considered. In this paper mixed-mode fatigue crack growth test is performed far horizontal crack and critical inclined crack in mechanical joints. Fatigue crack growth path is predicted by maximum tangential stress criterion using stress intensity factor obtained from weight function method, and fatigue crack growth rates of horizontal and inclined crack are compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.187-192
• /
• 2001

Cracks in mechanical joints is generally under mixed-mode and there is the critical inclined angle at which mode I stress intensity factor becomes maximum. In order to evaluate the fatigue life of cracks in mechanical joints, horizontal crack normal to the applied load and located on minimum cross section is major concern but critical inclined crack must also be considered. In this paper mixed-mode fatigue crack growth test is performed for horizontal crack and critical inclined crack in mechanical joints. Fatigue crack growth path is predicted by maximum tangential stress criterion using mode I and mode II stress intensity factors obtained from weight function method, and fatigue crack growth rates of horizontal and inclined crack are compared.

• 한국환경생태학회지
• /
• 제25권5호
• /
• pp.717-724
• /
• 2011

본 연구는 해안 곰솔림에 생육하고 있는 아까시나무의 분포특성을 결정하는 요인을 구명하기 위하여 아까시나무의 생장특성과 임내 환경을 조사 분석하였다. 해안 곰솔림 내에 분포하고 있는 아까시나무의 분포확대 억제요인을 분석한 결과, 염분농도가 높은 0m 지점에서 잎의 갈변, 위조, 조기낙엽 현상이 나타나 염분이 아까시나무의 생장억제에 큰 영향을 미치는 요인으로 추정되었다. 그러나 토양특성과 광환경은 식재지점간의 차이는 나타나지 않아 아까시나무의 생장에 있어 큰 영향을 주지 않는 것으로 추정되었다. 또한 해안측에 생장하고 있는 아까시나무의 수평근 연륜분석 결과, 2년생 개체의 근주에서 0.1~0.2m 떨어진 수평근 연륜에서도 1년 밖에 형성되지 않아 아까시나무의 수평근으로 영양공급이 충분하게 이루어지지 않아 수평근의 신장을 억제하는 것으로 추정되었다. 따라서 새로운 수평근의 신장과 개체의 신생이 이루어지지 않아 해안측으로 아까시나무의 분포확대가 억제되는 것으로 사료되었다.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.23-35
• /
• 1979

The present study has the purpose of investigating various growth and developmental aspects of rabbit snout with the aid of metallic implantation and of improving on the indirect method of growth and developmental studies of its skull. Sixty-eight growing albino rabbits were used. A head holder, film holder, cephalometer, metallic implanting device and implant materials were designed and constructed by the author. Eight metallic pins were implanted with a metallic implanting device in the rabbit snout under general anesthesia. Two metallic pins were implanted on each side of the interfrontal suture and another two were put on each side of the internasal suture near the frontonasal suture. Serial cephalograms were taken with a two-week interval, using the head holder, film holder and cephalometer. Eight items of linear measurement were obtained from the film. On the base of the results of the study, the following conclusions are obtained: 1. The metallic implant method is better than the other indirect methods for growth and developmental studies of the rabbit skull. 2. Most of the vertical growth of the rabbit snout is due to sutural growth at the frontonasal suture and the horizontal growth is at the interfrontal and the internasal suture. 3. The vertical growth of the rabbit snout is greater than the horizontal growth. 4. The horizontal growth of the rabbit snout is greater at the nasal bone than at the frontal bone. 5. The amount of vertical growth of the rabbit snout is almost same at inner and outer side of the interfrontal and internasal suture line, 6. Growth rate of the sutural growth of the rabbit snout tends to decrease by the growth of the rabbit. 7. Implant materials do not disturb growth and development of the rabbit snout, except a slight trauma effect during the first week of metallic implantation.

• 복식문화연구
• /
• 제15권1호
• /
• pp.37-57
• /
• 2007

The purpose of this study was to analyze the body measurements of boys and girls at puberty and to provide the fundamental data for pubescent apparel manufacturers to produce clothing that reflect their physical characteristics. A total of 549 boys and 529 girls aged between 10 and 14 were measured in the capital area from March 4 to April 3, 2004. Data were collected from 35 anthropometric items and 12 photographic items per a person. SPSS Ver. 12 program was used in data analysis including means, standard deviation, t-test and Duncan test. The main results of this study were as follows. They showed the significant difference of their growth in accordance with the increase of their ages. There were also the difference between boys and girls. As for height and length items, boys showed a slow growth at the age of $10{\sim}11\;and\;12{\sim}13$. Those at the age of $11{\sim}12\;and\;13{\sim}14$ showed rapid growth. That is, an active growth was followed by a slow growth and that phenomenon repeatedly occurred. On the other hand, girls showed remarkable growth at the age $10{\sim}11$ and the growth rate gradually slowed down afterward. Regarding circumference items, boys at the age of $11{\sim}12\;and\;13{\sim}14$ showed remarkable growth. This results showed that boys at the age of $11{\sim}12$ had vertical growth and horizontal growth at the same time and for those at the age of $13{\sim}14$, growth was more conspicuous in horizontal direction. Meanwhile, for girls, the growth rate was high at the age of $11{\sim}12$, somewhat later than the age of the growth of height and length. As for breadth-related items and depth-related items, for both sexes two items grew steadily throughout the ages, breadth-related items showed a higher growth rate than that of depth-related items. This study analyzed the body measurements of pubescent boys and girls and the results showed that, for boys, an active physical growth took place at the age of 13 according to previous studies, but the findings of this study suggested that the phenomenon now occurred at the age of $11{\sim}12$, which proved that physical growth took place earlier than before. Also, an active growth was followed by a slow growth. Girls at puberty showed remarkable growth of height at the age of $10{\sim}11$ that is consistent with previous studies and then showed horizontal growth at the age of around 12, having a voluminous body shape.

• 대한전기학회논문지
• /
• 제35권1호
• /
• pp.1-7
• /
• 1986

The GaAs bulk single crystals are grown by the Horizontal Bridgman method. During the growth, one of the problems in Bridgman method is the boat wetting between GaAs molten and silica boat. This boat wetting may result in another nucleation to form twin crystals. In this study, We find that the optimal size for sand blasting is 320 mesh. Backfilling the ampoule with argon gas during the vaccum bake-out decreaes the boat wetting. The reaction mechanism of Ga with quartz to produce suboxide, Ga2O, and sillion is discussed.

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.149-154
• /
• 2016

The use of nonlinear ultrasonics wave has been accepted as a promising tool for monitoring material states related to microstructural changes, as it has improved sensitivity compared to conventional non-destructive testing approaches. In this paper, third harmonic generation of shear horizontal guided waves propagating in an isotropic plate is investigated using the perturbation method and modal analysis approach. An experimental procedure is proposed to detect the third harmonics of shear horizontal guided waves by electromagnetic transducers. The strongly nonlinear response of shear horizontal guided waves is measured. The accumulative growth of relative acoustic nonlinear response with an increase of propagation distance is detected in this investigation. The experimental results agree with the theoretical prediction, and thus providing another indication of the feasibility of using higher harmonic generation of electromagnetic shear horizontal guided waves for material characterization.

• 한국토양비료학회지
• /
• 제46권4호
• /
• pp.237-244
• /
• 2013

Radar remote sensing is appropriate for monitoring rice because the areas where this crop is cultivated are often cloudy and rainy. Especially, Synthetic Aperture Radar (SAR) can acquire remote sensing information with a high temporal resolution in tropical and subtropical regions due to its all-weather capability. This paper analyzes the relationships between backscattering coefficients of rice measured by RADARSAT-2 SAR and growth parameters during a rice growth period. We examined the temporal variations of backscattering coefficients with full polarization. Backscattering coefficients for all polarizations increased until Day Of Year (DOY 222) and then decreased along with Leaf Area Index (LAI), fresh weight, and Vegetation Water Content (VWC). Vertical transmit and Vertical receive polarization (VV)-polarization backscattering coefficients were higher than Horizontal transmit and Horizontal receive polarization (HH)-polarization backscattering coefficients in early rice growth stage and HH-polarization backscattering coefficients were higher than VV-polarization backscattering coefficients after effective tillering stage (DOY 186). Correlation analysis between backscattering coefficients and rice growth parameters revealed that HH-polarization was highly correlated with LAI, fresh weight, and VWC. Based on the observed relationships between backscattering coefficients and variables of cultivation, prediction equations were developed using the HH-polarization backscattering coefficients.