• 제목, 요약, 키워드: hydrophilic polymer

검색결과 388건 처리시간 0.055초

저관리형 옥상녹화 식물생육을 위한 Hydrophilic polymer의 효용성 (Evaluation of Hydrophilic Polymer on the Growth of Plants in the Extensive Green Roofs)

  • 양지;윤용한;주진희
    • 한국환경생태학회지
    • /
    • v.28 no.3
    • /
    • pp.357-364
    • /
    • 2014
  • 본 연구는 저관리형 옥상녹화에서 보수성을 높일 수 있는 식재지반을 조성하기 위해 친수성 중합체인 hydrophilic polymer의 효용성을 평가하고자 현장실험을 수행하였다. Hydrophilic polymer의 농도는 각각 인공배합토 100kg을 기준으로 0%(대조구), 1.0%, 2.5%, 5.0%, 10% 등 총 5가지로 구성하였다. 가로 1.0m, 세로 1.0m, 높이 0.3m로 자체 제작한 실험구에 2013년 5월 20일에 각각 10반복의 식물을 정식하였으며 식재기반 내 토양용적수분함량을 모니터링하였다. 또한 현재 이용되는 수종인 눈향나무, 황금줄사철나무 등의 목본류와 잠재종으로 가능성이 높은 통보리사초, 좀보리사초 등의 사초류를 중심으로 식물생육을 측정하였다. 토양의 hydrophilic polymer의 농도에 따른 토양용적수분 함량은 강수량과 상관없이 2.5%이상의 hydrophilic polymer 처리구에서 97%~98%로, 100%에 가까운 토양용적수분 함량을 보였다. 강우 후 27일 동안 토양용적수분함량이 대조구에서 50%~60%를 보인 반면, 1.0%의 hydrophilic polymer 처리구에서는 70%~80%로 약 20%가 증가되었다. 식물생육을 조사한 결과, 황금줄사철나무와 통보리사초는 2.5% 처리구에서 가장 생육이 좋았고, 눈향나무는 1.0% 처리구, 좀보리사초는 0%(대조구)에서 생육상태가 가장 양호하였다. hydrophilic polymer 1.0% 처리구와 2.5% 처리구에서는 모든 식물이 생존하였으나 5.0%와 10.0%의 처리구에서는 식재 후 3개월 이내에 모두 고사하였다. 이는 hydrophilic polymer 배합비는 수종별 특성에 따라 다르게 적용되어야 함을 보여준 결과라 할 수 있다.

Core-Shell Polymerization with Hydrophilic Polymer Cores

  • Park, Jong-Myung
    • Macromolecular Research
    • /
    • v.9 no.1
    • /
    • pp.51-65
    • /
    • 2001
  • Two-stage emulsion polymerizations of hydrophobic monomers on hydrophilic seed polymer particles were carried out to make core-shell composite particles. It was found that the loci of polymerization in the second stage were the surface layer of the hydrophilic seed latex particles, and that it has resulted in the formation of either eccentric core-shell particles with the core exposed to the aqueous phase or aggregated nonspherical composite particles with the shell attached on the seed surface as many small separated particles. The driving force of these phenomena is related to the gain in free energy of the system in going from the hydrophobic polymer-water interface to hydrophilic polymer-water interface. Thermodynamic analysis of the present polymerization system, which was based on spreading coefficients, supported the likely occurrence of such nonspherical particles due to the combined effects of interfacial free energies and phase separation between the two polymer phases. A hypothetical pathway was proposed to prepare hydrophilic core-hydrophobic shell composite latex particles, which is based on the concept of opposing driving and resistance forces for the phase migration. It was found that the viscosity of the monomer-swollen polymer phase played important role in the formation of particle morphology.

  • PDF

빗물활용 옥상녹화 녹색기술 개발을 위한 친수성 중합체의 효용성 (Utility of Hydrophilic Polymer for Green Technology Development in Green Roofs Using Rainwater)

  • 주진희;양지;윤용한
    • 한국환경과학회지
    • /
    • v.21 no.12
    • /
    • pp.1469-1476
    • /
    • 2012
  • Hydrophilic polymer is suitable as soil conditioners for green roofs that use rainwater, due to promotion of water retention capacity as well as enhancement of the water absorbing capacity. The objective of the present study was to investigate the effects of different levels of hydrophilic polymer concentrations (0, 0.1, 0.2, 0.4, 0.8% w/w) on the water holding capacity and growth response of 6 species in soils amended with hydrophilic polymer in 5 cm of soil thickness on green roofs. The results showed that the water holding capacity of the amended soil improved with increasing amount of applied polymer. The application of 0.8% w/w of the polymer increased the soil moisture by 87% compared to the control, and decreased slowly in green roofs during an arid period. The growth of Sedum spurium 'Dragon's blood' and Lampranthus spectabilis increased significantly and had greater than 60% relative coverage with higher hydrophilic polymer concentrations. However, Juniperus chinensis var. sargentii and Euonymus fortunei var. radicans had no significant differences upon change of hydrophilic polymer concentrations. In Carex kujuzana and Carex morrowii 'Aurea variegata', growth decreased with increase of hydrophilic polymer concentrations. 30 days after planting, Juniperus chinensis var. sargentii, Euonymus fortunei var. radicans, Carex kujuzana, and Carex morrowii 'Aurea variegata' died back due to lowest soil thickness (5 cm), but Sedum spurium 'Dragon's blood' and Lampranthus spectabilis had greater than 90% survival.

옥상 내 저관리 도시농업에서 친수성 중합체 배합비에 따른 가지(Solanum melongena)의 생육반응 (Growth Responses of Eggplant (Solanum melongena) to Hydrophilic Polymer Mixture Ratio in Growing Medium for Lower Maintenance Urban Agriculture via Green Roofs)

  • 주진희;김원태;허혜;윤용한;최은영
    • 한국환경과학회지
    • /
    • v.25 no.5
    • /
    • pp.625-633
    • /
    • 2016
  • This study was conducted to investigate the influence of hydrophilic polymer (HP) mixture ratio (Control, 1.0%, 2.5%, 5.0%, and 10.0%) on growth of eggplant (Solanum melongena) for lower maintenance urban agriculture via green roofs. Although it was not statistically significant (p > 0.05), substrate temperature was decreased as hydrophilic polymer mixture ratio were increased. High substrate water content (95%) was found consistently in growing media under elevated hydrophilic polymer mixture ratio at over 5% during the entire growing period. Substrate electronic conductivity was increased as hydrophilic polymer mixture ratio were increased. Growth index was decreased as hydrophilic polymer mixture ratio was increased. It was reduced about 1/3 and 1/5 compared to that of Control in HP5.0 and HP10.0 treatment plants, respectively. Number of leaves, leaf length, and leaf width were decreased in following order: Control> HP1.0> HP2.5> HP5.0> HP10.0 treatments. There numbers were significantly lower in HP5.0 and HP10.0 treatment plants. Dry weight of shoot and root were decreased as hydrophilic polymer mixture ratio was increased. They were reduced by 1/4 compared to those of Control treatment plants. In addition, visual value was decreased as hydrophilic polymer mixture ratio was increased. Plants grown in HP1.0, HP2.5, and HP5.0 treatments all survived. However, plants grown in the HP10.0 treatment had the lowest survival rate (56%) after 3 months of growing. These results indicate that the advantage of adding hydrophilic polymer to green roof growing media may greater during dry periods. However, the proper mixture proportion of hydrophilic polymer should be determined according to different characteristics of growing media and plant species.

분별침전에서 친수성 고분자 물질을 이용한 (+)-dihydromyricetin의 입자크기 감소 (Decreasing Particle Size of (+)-Dihydromyricetin Using Hydrophilic Polymer in Fractional Precipitation)

  • 지성빈;김진현
    • Korean Chemical Engineering Research
    • /
    • v.56 no.3
    • /
    • pp.370-375
    • /
    • 2018
  • 본 연구에서는 생리활성물질 (+)-dihydromyricetin의 입자크기 감소를 위하여 친수성 고분자 물질을 첨가하여 분별침전을 수행하였다. 고분자 물질(HPMC 2910, PVP K90, PVA)이 첨가된 분별침전을 통해 (+)-dihydromyricetin 입자크기를 감소시킬 수 있었다. 특히 분별침전 시 HPMC 2910 (0.1%, w/v)을 첨가할 경우, 대조군에 비하여 입자크기가 $38-68{\mu}m$ (32-40%) 정도 감소하여 입자크기 감소에 가장 효과적이었다. 또한 (+)-dihydromyricetin침전물의 입자크기는 친수성 고분자 물질 첨가에 따른 침전용액의 제타전위 절대값에 반비례함을 알 수 있었다.

이온빔보조 반응법을 이용한 고분자 표면의 친수성처리와 그 응용 (Hydrophilic surface formation of polumer treated by ion assisted reaction and its applications)

  • 조정;최성창;윤기현;고석근
    • 한국진공학회지
    • /
    • v.8 no.3B
    • /
    • pp.262-268
    • /
    • 1999
  • Polycarbonate (PC) and Polymethylmethacrylate (PMMA) surface was modified by ion assisted reaction (IAR) technique to obtain the hydrophilic functional groups and improve the wettability. In conditions of ion assisted reaction, ion beam energy was changed from 500 to 1500eV, and ion dose and oxygen gas blown rate were fixed $1\times10^{16}$ ions/$\textrm{cm}^2$ and 4ml/min, respectively. Wetting angle of water on PC and PMMA surface modified by $Ar^+$ ion without blowing oxygen at 4ml/mon showed $5^{\circ}$ and $10^{\circ}$. Changes of wetting angle with oxygen gas and $Ar^+$ ion irradiation were explained by considering formation of hydrophilic group due to a reaction between irradiated polymer chain by energetic ion irradiation and blown oxygen gas. X-ray photoelectron spectroscopy analysis shows that hydrophilic groups such as -C-O, -(C=O)- and -(C=O)-O- are formed on the surface of polymer by chemical interaction. The polymer surface modification using ion assisted reaction only changed the surface physical properties and sept the bulk properties. In comparison with other modification methods, the surface modification by IAR treatment was chemically stable and enhanced the adhesion between metal and polymer surface. The applications of various kinds of polymer surface modification methods, metal and polymer surface. The applications of various kinds of polymer surface modification could be appled to the new materials about hydrophilic surface properties by IAR treatment. The adhesion between metal film and polymer measured by Scotch tape test whether the hydrophilic surfaces could improve the adhesion strength or not.

  • PDF

The Synthesis and Evaluation of Pendant Oligosaccharide-Lipid Side Chain Copolymer

  • Nam, Hye-Sung;Kim, Hyun-Joo;Nam, Kwang-Woo;Chung, Dong-June
    • Macromolecular Research
    • /
    • v.11 no.2
    • /
    • pp.115-121
    • /
    • 2003
  • In this research, the in vitro anti-thrombogenecity of artificial materials was evaluated using hydrophilic/hydrophobic copolymers containing oiligosaccharide as hydrophilic moiety and phospholipid as hydrophobic moiety respectively. N-(p-vinylbenzyl)-[O-$\alpha$-D-glucopyranosyl-(1longrightarrow4)]$_{n-1}$-D-glucoamide(VM7A) was (VM7 A) was adopted as hydrophilic oligosaccharide and 2-acryloxybutyl-2-(triethylammonium)ethyl phosphoric acid (HBA-choline) was adopted as hydrophobic phospholipid. Copolymers having various monomer feeding molar ratios were synthesized through radical polymerization. The synthesized copolymers were identified using FT-IR, $^1$H-NMR, XPS, and DSC. The surface energy of the copolymers were evaluated by dynamic contact angle (DCA) method and checked different roles of VM7A as hydrophilic moiety and HBA-choline as hydrophobic moiety on surface. The surface morphological differences between hydrated and unhydrated surfaces of copolymers were observed and evaluated using Am. The platelets were separated from canine whole blood by centrifugation and adopted to the anti-thromobogenecity test of the copolymers. From the results, we find out that as VM7A ratio increases, so did anti-thrombogenecity. Such results show the possibility of using these copolymers as blood compatible materials in living body.y.

친수성 고분자 박막의 유전 특성 (Dielectric Property of Hydrophilic Copolymer Thin Films)

  • 최승렬;임경진;김준영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • /
    • pp.229-229
    • /
    • 2007
  • In this study, HEMA-based hydrophilic copolymers were synthesized and dielectric constant (K) of the polymer thin films were investigated by change hydroxyl group (-OH) ratio in the polymer chain. The different hydroxyl group ratios were characterized by FT-IR and its thin films were obtained by spin coating. As a result, due to the moisture absorption of the hydrophilic thin film, the dielectric constant has been increased as was expected. The highest dielectric constant (K=4.19, @1MHz) was observed at 40% hydroxyl group ratio among the several polymers.

  • PDF

친수성고분자 매트릭스의 Naproxen 제어방출에 관한 연구 (A Study on the Controlled Release of Naproxen from Hydrophilic Polymer Matrix)

  • 김종국;조은실
    • 약학회지
    • /
    • v.31 no.1
    • /
    • pp.25-32
    • /
    • 1987
  • The effect of loading dose, plasticiser and PVA molecular weight on naproxen release from hydrophilic polymer matrix was examined. Hydrophilic polymer matrix was prepared with PVA and PVP by adding glycerine as plasticiser. The release of naproxen from polymer matrix was determined in phosphate buffer medium. The release rate of naproxen from the polymer matrix increased as drug loading dose and plasticiser percentage increased. Raproxen released from the polymer matrix showed the time square root kinetics. Without changing the release-pattern, the release rate of naproxen could not be changed by varying molecular weight of PVA. Linearly released time range increased as drug loading dose increased, whereas decreased as plasticiser percentage increased up to 30%.

  • PDF

Formation of hydrophilic polymer films by DC-plasma of monomer and reactive gases

  • Kim, Ki-Hwan;Park, Sung-Chang;doo-Jin choi;Jung, Hyung-Jin;Koh, Seok-Keun
    • 한국진공학회:학술대회논문집
    • /
    • /
    • pp.161-161
    • /
    • 1999
  • In the field of material science, the interests and efforts to modify the surface of materials in agreement with the need of usage have been extensively increasing. he modification to improve the wettability of surface is very important is terms of adhesion, printing, etc. It is very difficult to modify metal surface into hydrophilic one. therefore, surfactant coating has been generally used in many cases. However, surfactant has disadvantages such as environmental problem, soluble in water. in this study, hydrophilic polymer films as alternative of surfactant were deposited on metal substrate by DC plasma polymerization. Hydrophilic polymer films deposited by DC plasma show many merits such as good wettability, stone adhesion to substrate, high resistance to most chemicals. Monomer gas and reactive gas were used as source plasma polymerization. Plasma polymerized films were fabricated with process parameters of deposition time, ratio of gas mixture, current, pressure, etc. Effects of these variables on wettability of plasma polymer films will be discussed. With XPS and FT-IR analyses of plasma polymeric films, the relation between wettability and chemical state of polymer films by DC plasma was investigated.

  • PDF