• 공학논문집
• /
• 제3권1호
• /
• pp.223-233
• /
• 1998

고상반응식을 이용한 석회와 석영과의 수열반응속도 및 반응메카니즘에 관하여 연구하였다. 출발물질로 석영과 수산화칼슘 CaO/$SiO_2$몰비 0.8-1.0로 혼합하고 $180-200^{\circ}C$, 0.5-8시간동안 포화증기압하에서 오토클레이브로 수열반응을 행하였다. 수열반응속도는 총 석회의 양과 총 석영의 양에 대한 미반응 석회의 양과 미반응 석영의 양의 비로 구하였다. 반응속도는 Jander의 식 $[1-(1-\alpha)^{1/3}]^N=Kt$를 이용하여 얻은 결과, 석회의 반응속도는 N=1로서 주로 용해속도에 의해 지배되고 석영의 반응속도는 $N\risingdotseq2$로서 확산에 의해 주로 지배된다. 규산칼슘수화물계의 수열반응속도는 반응물 입자주위에 형성된 생성물층을 통한 물질전달에 의해 율속되는 것으로 추정되고 전체 수열반응의 속도식은 대략 $N=1-2$로서 경계층으로부터 확산에 의해 율속과정으로 전환된다.

• 자원환경지질
• /
• 제25권3호
• /
• pp.225-232
• /
• 1992

The hydrothermal alteration is evaluated using multicomponent equilibrium calculations with the program CHILLER for the reactions between hydrothermal water and rhyolite at the temperature of $300^{\circ}C$ and pressure of 500 bars. The chemical-reaction model on the depositional processes of the sericitite confirms that the hydrothermal water-rock interaction(hydrothermal alteration) is the main mechanism of the sericitite formation. The principal change in the aqueous phase during the reaction is the pH increase. Overall trends for the major species are the increase in total molalities of K, Ca, $SiO_2$, Al, Mg, Fe, Na, and sulfide in solid phase with hydrothermal water-rhyolite reaction and the decrease of them in aqeous solution by precipitation of hydrothermal products. Quartz and sericite are the first minerals to form. The sequence of minerals to precipitate following them is chlorite, epidote, pyrite and microcline as water/rock ratio decreases. Although calculated results cannot duplicate the complexities of natural hydrothermal alteration, the calculation provides thermodynamic constraints on the natural process. The calculation results resemble those of experimental studies. Sericitite forms where pH decreases and water/rock ratio increases.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.735-747
• /
• 1995

The synthesis of clay mineral through the hydrothermal reaction of the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated. It was observed that this anorthite sample was easily converted into clay mineral with 0.5 wt% HCl solution at a temperature below 20$0^{\circ}C$ under a pressure about 15 atm. The conversion reaction was promoted by adding aluminum chloride under the condition concerned. Aluminum chloride was considered to supply the insufficient aluminum ion during the conversion reaction and to reprepare the acid solution-condition by adding the HCl-component as a by-product. According to the electron micrographs, it was confirmed that fine tubular or needle-shaped halloysite-kaolin minerals with the crystal length shorter than about 1.1${\mu}{\textrm}{m}$ could be obtained by the hydrothermal reaction for 5 days under those conditions.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.288-294
• /
• 2009

The platelet AlO(OH) nano colloids were prepared by hydrothermal reaction of the $\gamma-Al_2O_3$ obtained with dehydration of $\gamma$-AlO(OH) and dilute $CH_3COOH$ solution. In hydrothermal reaction process, reversible reaction was accompanied between $\gamma-Al_2O_3$ and AlO(OH), and hydrothermal reaction temperature, hydrothermal reaction time and $CH_3COOH$ concentration had an effect on the crystal structure, surface chemical property, surface area, pore characteristics and crystal morphology of the AlO(OH) nano colloid particles. In this study, it was investigated to the hydrothermal reaction condition of the AlO(OH) nano colloid for using catalyst support, heat resisting agent, adsorbents, binder, polishing agent and coating agent. The crystal structure, surface area, pore volume and pore size of the platelet AlO(OH) nano colloids were investigated by XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method in liquid nitrogen temperature.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• 유기물자원화
• /
• 제25권1호
• /
• pp.47-55
• /
• 2017

유기성폐기물의 수열처리 기술은 고온에서 운전하여 에너지 소비가 큰 열분해 탄화기술의 단점을 보완하기 위한 방법으로, 세포벽을 파괴하여 탈수성을 향상시켜 탈수공정에서 함수율을 약 40% 수준까지 낮출 수 있는 장점을 가지고 있어 유기성폐기물의 고형연료화 분야에서 전 세계적으로 많은 연구가 진행되고 있다. 이에 본 연구에서는 수열처리가 유기성폐기물의 건조효율에 미치는 영향에 대하여 평가하였다. 대상물질로는 대표적인 유기성폐기물인 하수슬러지와 음식물류폐기물을 이용하여 $200^{\circ}C$에서 1시간동안 수열처리한 후 건조효율 변화를 관찰하였다. 유기성폐기물은 수열처리 후에 건조시간이 단축되어 $100^{\circ}C$에서 건조한 음식물류폐기물의 경우 원시료보다 건조시간이 52.9% 감소하였다. 따라서 수열탄화 반응이 하수슬러지와 음식물류폐기물의 건조효율을 상승시킬 수 있음을 확인하였다. 또한, 건조특성곡선의 예열기간에서 건조속도가 원시료 대비하여 각각 148%($80^{\circ}C$ 하수슬러지), 151%($100^{\circ}C$ 하수슬러지), 209%($80^{\circ}C$ 음식물류폐기물), 366%($100^{\circ}C$ 음식물류폐기물)로 모든조건에서 증가되는 것으로 보아 수열반응에서 세포벽이 파괴되면서 표면적이 늘어났음을 간접적으로 파악할 수 있었다. 건조시간이 단축됨에 따라 한계함수율이 높아져 감율건조기간이 증가하였으므로 이에 주의하여야 하며, 탄화정도에 따라 건조효율이 더 개선될 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1265-1270
• /
• 1994

Ultra-fine hydroxyapatite powder were synthesized by the hydrothermal reaction at 10 atm, 3 hrs of Ca(OH)2 suspension with (NH4)2HPO4 solution, and were characterized sintering behavior. Sintered bodies of hydroxyapatite powders which synthesized by hydrothermal reaction method has less weight loss, less sintering shrinkage and superior mechanical property, and was more dense than sintered bodies of hydroxyapatite powder which synthesized by wet method. Sintered bodies were hydroxyapatite single phase. When soack in Ringer's solution for 2 weeks, hydroxyapatite powders preserved hydroxyapatite and sintered body absorbed trace of Ca2+ ion with soaked time.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.127-133
• /
• 2021

One-dimensional (1D) piezoelectric nanostructures are attractive candidates for energy generation because of their excellent piezoelectric properties attributed to their high aspect ratios and large surface areas. Vertically grown BaTiO₃ nanotube (NT) arrays on conducting substrates are intensively studied because they can be easily synthesized with excellent uniformity and anisotropic orientation. In this study, we demonstrate the synthesis of 1D BaTiO₃ NT arrays on a conductive Ti substrate by electrochemical anodization and sequential hydrothermal reactions. Subsequently, we explore the effect of hydrothermal reaction conditions on the piezoelectric energy conversion efficiency of the BaTiO₃ NT arrays. Vertically aligned TiO₂ NT arrays, which act as the initial template, are converted into BaTiO₃ NT arrays using hydrothermal reaction with various concentrations of the Ba source and reaction times. To validate the electrical output performance of the BaTiO₃ NT arrays, we measure the electricity generated from each NT array packaged with a conductive metal foil and epoxy under mechanical pushings. The generated output voltage signals from the BaTiO₃ NT arrays increase with increasing concentration of the Ba source and reaction time. These results provide a new strategy for fabricating advanced 1D piezoelectric nanostructures by demonstrating the correlation between hydrothermal reaction conditions and piezoelectric output performance.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.41-45
• /
• 1993

synthesis of artificial kaolinite and the transformation of domestic halloysite have been attempted by means of the hydrothermal treatment. The hydrothermal reaction of the mixtures of gibbsite and amorphous silica was conducted for the synthesis of kaolinite under the pressure of 125MPa at 30$0^{\circ}C$ and especially the seed of kaolinite was added so as to facilitate the synthesis reaction. Domestic pink kaolin of B-grade was hydrothermally treated, in a similar way, for the transformation of crystalline form of it. Boehmite and the artificial kaolinite less than 0.4${\mu}{\textrm}{m}$ could be obtained through the hydrothermal reaction. It could also be found that the majority of hyalloysite was transformed into the plate-type kaolinite through the recrystallization by treating hydrothermally for a long time.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3796-3798
• /
• 2011