• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.69
• /
• pp.589-616
• /
• 2016

The reviewing of an analysis of the Korea-China FTA due to guidance introduced for the new regulations or exceptional regulations compared to the KORUS, Korea-EU, Korea-ASEAN FTA. Commodity sectors in the Korea-China FTA and the KORUS, Korea-EU, Korea-ASEAN FTA(the majority in the country and trade criteria analysis result) compared and analyzed the results, rules of origin and the customs clearance procedures of origin, preferential tariff rate of origin and the origin preferential specific rules are somewhat difference, but customs and trade facilitation regulations are already quite consistent with the Korea customs system. Relatively important research results were as follows. First, the calculation of the regional value content in KORCHINA FTA is that I'm to use the deduction method can comprehensively reflect a regional value ratio, with respect to the materials acquired originating status as the FTA in the US and EU use the product non it's not to consider the value of the originating materials originating materials can be utilized for intermediate goods. Second, even if a non-treaty country in the middle with the exception of direct transport rules, and acknowledge the country of origin are under customs control, there are provisions for the period are temporarily stored in a non-treaty countries separately, that period goods imported into the non-treaty countries and up to three months from the day. If the situation of the occurrence of force majeure be greater than three months, but has so exceed six months. Third, the materials acquired originating status in the Korea-China FTA not to consider the value of non-originating materials used in its products as the KORUS FTA and Korea-EU FTA, that can be utilized originating materials for intermediate goods. It is expected that higher utilization of rules of origin. Meanwhile, Korea-China FTA has provisions to allow requests for preferential tariff applied on imports Customs declaration of intention to apply pre-condition for a preferential tariff applied to the importer. In other words, if the import customs tariff preference when applying post-intention not to advance is to be noted that any preferential treatment to prevent the later application.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.723-730
• /
• 2016

Domestic Manila clam production has been reduced due to coastline changes and environmental degradation, but aquaculture industry is facing difficulties caused by an increase in imports. It is important to recognize the integral habitat environment in order to do sustainable aquaculture. The habitat environment of Manila clams (Ruditapes philippinarum) is closely related to the productivity of aquaculture farms. This study investigated 3 indexes, survival (sediment type, hydrodynamic), growth (Chlorophyll a, DIN, DIP) and environment (water temperature, dissolved oxygen, sediment chemical oxygen demand, ignition loss) as indicators of habitat characteristics for a tidal flat farm in Geunso Bay (Pado and Beopsan) from June 2015 to May 2016. As a result, Pado (maximums.; sand 48.76 %, hydrodynamic 10.59 cm/s, Chlorophyll a 12.70 ug/L, exposure time 3 hours, DO 18.65 mg/L) had a higher sand content, faster current speed, more abundant nutrients and DO, providing more favorable conditions for Manila clams than Beopsan (maximums.; sand 37.40 %, hydrodynamic 6.02 cm/s, Chlorophyll a 6.41 ug/L, exposure time 7 hour, DO 14.81 mg/L). In fact, Pado showed a higher density than Beopsan. This study considered the habitat environments of Pado and Beopsan to provide a basis for optimal management practices and potential suitable sites in Geunso bay.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.117-124
• /
• 2018

This paper describes the localization development of an axial fan for KM-SAM multi-function radar. The multi-function radar, which is constantly affected by the external environment, is a key instrument for detecting and tracking low and medium altitude threat targets. Operating this equipment smoothly requires a fan for controlling the internal temperature and humidity. Presently, all such fans are imported. To solve these problems, localization development research was proposed. The development of localization includes analysis of requirements through review of related technical reports such as original equipment and system equipment specification, prototype design, and verification of design requirement through performance test and environmental test. The study results are described. The blower consisted of an axial fan with guide vanes and the motor was designed to generate a maximum airflow of 970 CFM and a wind pressure of 4.8 IWG. Six prototypes were manufactured for performance evaluation. In addition, for reliable data acquisition, AC power supply, fan performance tester and data acquisition equipment were designed and tested. All prototypes were verified as having design requirements equal to or better than those of imports.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.4
• /
• pp.965-982
• /
• 2011

Currently, dependency of natural and energy resources on world economy may not be more serious than any before increasing the uncertainty of Korea's national economy, especially as China uses unexpectedly fast glowing portion of world resources. Due to insufficient natural resources and unmatured renewable energy system, it is very important for Korea to secure the energy sources not only for national prosperity but also security for the future. In this regard, importance and necessity of nuclear energy as a major electric power source in Korea are in need to be emphasized. Korea currently imports all the necessary enriched uranium for fabrication of nuclear fuel from abroad. Thus, it is extremely important to establish a secured supply system for enriched uranium regardless of the global political unstability as well as economic fluctuation. In order to build the nuclear fuel procurement system, it is required to analyze the global market status, current enrichment service systems, and the future technology under development. For this purpose, this study comparatively analyzes the laser based advanced technology for uranium enrichment under development in the United States, which is assumed to be 2~3 times more economically viable than currently available technologies.

• Cartoon and Animation Studies
• /
• s.17
• /
• pp.83-95
• /
• 2009

As an exploratory research on China's animation, this study aims to enhance an understanding of the trends and characteristics of China's animation through examining its history and to forecast its future development trajectory. From its founding to recent period, China tried to maintain Communist political system through imbuing national identity to its people through management and supervision of media products under direct government's leadership in combination with ideological education. Such policy was also implemented in animation, major audience of which is children. With regard to the introduction of the policy and its influence, five historical phases could be identified as follows. During the first phase, from the founding of the Republic until the Cultural Revolution, national culture was introduced to China's animation. The second phase, which corresponds with the Cultural Revolution period, marks the decline of national culture. National culture was reemphasized during the third phase that follows the Cultural Revolution, which led to the nomination of the 'China school,' followed by the fourth phase, during which China's animation suffered the second decline due to the spread of TVs and foreign animation imports. Reintroduction of national culture on China's animation in the context of rapid industrialization process before and after 2000 characterizes the recent phase. It can be expected that although there could be some change in methods and forms, China's animation, which introduced national culture from its inception and maintained remarkable resilience following the period of decline, will continuously stress the its own national cultural identity.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.481-488
• /
• 2009

GIS is used to isolate large power electrical equipment using SF6 gas. While GIS has simple structure, it has few break down, relatively high reliability. But it is hard to check up faults for reason of pressure. Faults of GIS should have a ripple effect on community and be hard to recovery. Consequently, GIS imports a preventive diagnostic system to find internal faults in advance. It is most important that reliability on the GIS preventive diagnostic system, because it estimates abnormality of system by analysis result of collected data. But, exist system which used central data management is low efficiency, and hard to guarantee timeliness and accuracy of data. To guarantee timeliness and accuracy, the GIS preventive diagnostic system needs accordingly to use a real-time middleware. So, in this paper, to improve reliability of the GIS preventive diagnostic system, we use a middleware based on TMO for guaranteeing timeliness of real-time distributed computing. And we propose an improved GIS preventive diagnostic system applying data acquisition, monitoring and control methods based on the TMO model. The presented system uses the Communication Control Unit(CCU) for distributed data handling which is supported by TMO. CCU can improve performance of the GIS preventive diagnostic system by guaranteeing timeliness of data handling process and increasing reliability of data through the TMO middleware. And, it has designed to take full charge of overload on a data acquisition task had been processed in an exist server. So, it could reduce overload of the server and apply distribution environment from now. Therefore, the proposed system can improve performance and reliability of the GIS preventive diagnostic system and contribute to stable operation of GIS.

• Journal of the Korean Home Economics Association
• /
• v.27 no.2
• /
• pp.21-30
• /
• 1989

The U.S. response to increased international competition was examined in the present study in order to have more comprehensive understanding of the U.S. textile and clothing market. The method employed to conduct the study was the analysis of the written materials, interview with professionals, and the survey of the actual situations of the U.S. textile and apparel industries. The results are summarized as follows; 1. Official U.S. textile and apparel trade policy has been quite has been quite protective since 1950's. The protective trend has been embodied in Japan Cotton Textile Export Control (reciprocal trade agreement signed by the U.S. and Japan in 1957), Short Term Arrangement Regarding International Trade in Cotton Textiles, Long Term Cotton Textile Arrangement (1962∼1973), and Multi-fiber Arrangement (1974∼). Other governmental programs designed to improve the competitiveness of the U.S. textile and apparel industries include Long-term Textile and Apparel Products Export-expansion Program, and 807 Trade to take labor cost advantage. 2. Along with the quite protective governmental trade policy, the corporate responses have been made such as new sourcing mixes, investment in technology, specialization in the textile and apparel industries, and recent strategies pursued by retailer's. The apparel industry was subject to pressure from imports that increased at moderate levels, and the U.S. textile and apparel industries have made extensive efforts to adjust to the increasing competition from abroad. The textile and apparel industries have taken steps to increase labor productivity through automation, to speed management to create and introduce new products and new methods, and have lowered indirect overhead costs. Several industrywide promotion campaigns have attempted to establish a greater public awareness of international competition and to develop a preference for apparel produced in the United States. 3. Regarding these response of the U.S. and other situations of world textile and apparel trade market, much of the sense of crisis that pervades Korean textile and apparel industries has to do with the problem of adjusting government and corporate policy. Textile and apparel industry of Korea faces on going pressure to reduce costs, improve quality, increase service, develop new markets, diversify, and differentiate itself from its foreign competitors. The strategies that have been adopted in the past have generally worked in the past, but the time has come to adopt strategies that reflect present conditions. If this is not done, then we stand to lose large segments of these industries, which once lost will not easily be regenerated.

• KDI Journal of Economic Policy
• /
• v.31 no.2
• /
• pp.47-85
• /
• 2009

With a relatively simple quantitative method, this study comprehensively analyzes the characteristics related to business cycles represented by macroeconomic variables of Korea since 1970. This empirical analysis deals with roughly following three topics: How to identify cyclical component with respect to trend; with what characteristics and how the economic variables of each sector move with in the phases of business cycle, and; whether there are signs of a structural change in the phases of business cycle. Section 2 discusses how to identify trends and cycle components, the basis assumption for the analysis of business cycle. Like the Korean economy, where a relatively high growth rate has been maintained, it is appropriate to determine its economic recession based on the fall in the growth trend, not in the absolute level of real output. And, it is necessary to apply the concept of growth cycle against a traditional concept of business cycle. Accordingly the setting of growth trend is of preliminary importance in identifying cyclical fluctuations. The analysis of Korea's GDP data since 1970, the decomposition of trends and cycles through the Band-pass filter is found to appropriately identify the actual phases of busyness cycle. Section 3 analyzes what particular relationship various economic variables have with output fluctuations during the phases of economic cycle, using the corss-correlation coefficients and prediction contribution. Section 4 monitors the stability of the phases of Korea's business cycle and quantitatively verifies whether there is a structural break, and then reviews the characteristics of variations in each sector. And, stylized facts observed through these studies are summarized in the conclusion. The macroeconomic stability of Korea, in particular, is found to continue to improve since 1970, except for the financial crisis period. Not only that, it is found that its volatility of economic growth rate as well as inflation have been reduced gradually. Meanwhile, until recently since 2000, the volatility in domestic demand has remained stable, while that in exports and imports has been increased slightly. But, in an over all perspective, Korea's business cycle variation is on the decline due to shorter response period to shocks and the formation of complementary relationship among economic sectors.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.174-179
• /
• 2009

To track moving tumor in real time, CyberKnife system imports a technique of the synchrony respiratory tracking system. The fiducial marker which are detectable in X-ray images were demand in CyberKnife Robotic radiosurgery system. It issued as reference markers to locate and track tumor location during patient alignment and treatment delivery. Fiducial marker implantation is an invasive surgical operation that carries a relatively high risk of pneumothorax. Most recently, it was developed a direct lung tumor registration method that does not require the use of fiducials. The purpose of this study is to measure the accuracy of target applying X-sight lung tracking using the Gafchromic film in dynamic moving thorax phantom. The X-sight Lung Tracking quality assurance motion phantom simulates simple respiratory motion of a lung tumor and provides Gafchromic dosimetry film-based test capability at locations inside the phantom corresponding to a typical lung tumor. The total average error for the X-sight Lung Tracking System with a moving target was $0.85{\pm}0.22$ mm. The results were considered reliable and applicable for lung tumor treatment in CyberKnife radiosurgery system. Clinically, breathing patterns of patients may vary during radiation therapy. Therefore, additional studies with a set real patient data are necessary to evaluate the target accuracy for the X-sight Lung Tracking system.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.196-203
• /
• 2015

AbstractLiving modified organisms (LMO) are one of the most widespread products of modern biotechnology after DNA discovery. Due to the decline of grain self-sufficiency rate and the increase of reliance on LMO imports in Korea, a series of concerns with regard to safety of living modified(LM) crops has been raised. The aim of this study is to establish the detection methods for unintentional release or growing of LMO plants in environmental conditions. To detect LM crop events, general concepts of specific primer design and PCR conditions were provided by the Joint Research Centre (JRC). The certified reference materials of seven LM events (4 soybean, 2 cotton and 1 corn) were obtained from the Institute for Reference Materials and Measurements (IRMM) and the American Oil Chemists' Society (AOCS). Genomic DNA from seven LM events were purified and PCR amplifications were carried out by using individual event-specific primer sets. LM-specific PCR products of all seven events were efficiently amplified by our methods. The results indicate that the established detection method for LMOs is suitable as a scientific tool to monitor whether the crops found in natural environments are LMOs.