• 제목/요약/키워드: improvement depth

검색결과 1,311건 처리시간 0.036초

지반조건에 따른 동다짐의 개량심도 평가 (Estimation of Depth of Improvement by Dynamic Compaction with Soil Conditions)

  • 이봉직;윤준식;이종규
    • 한국지반환경공학회 논문집
    • /
    • 제6권3호
    • /
    • pp.55-61
    • /
    • 2005
  • 동다짐공법은 느슨한 지반의 개량에 주로 사용되는 공법으로 점착성 토사나 폐기물과 성토지반에도 성공적으로 적용되고 있다. 동다짐공법의 설계에 있어 지반개량심도의 결정은 중요한 요소이다. 그러나 개량심도는 다짐에너지 뿐만 아니라 다짐간격, 대상토질 특성, 포화정도 및 현장여건 등에 영향을 받고 있다. 본 연구에서는 개량심도 예측을 위하여 현장실험결과를 이용하였으며 다짐에너지, 토질특성 및 포화정도에 따른 개량심도를 평가하였다.

  • PDF

동다짐 공법의 유효다짐깊이 결정에 영향을 주는 인자 분석 (Analysis of Influence Parameters to Evaluate the Effective Depth of Improvement of Dynamic Compaction Method)

  • 김홍택;이혁진;박인준
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.659-666
    • /
    • 2004
  • Dynamic compaction has evolved as an acceptable method of site improvement by treating poor soils in situ. The method is often an economical alternative for utilizing shallow foundations and preparing subgrades for construction when compared with conventional solutions. In general, the installation purpose of dynamic compaction are to increase bearing capacity and decrease differential settlement within a specified depth of improvement. This method involves the s systematically dropping large weights onto the ground surface to compact the underlying ground. The weights used on dynamic compaction projects have been typically constructed of steel plates, sand or concrete filled steel shells, and reinforced concrete. Typically, weights range from 5-20 ton and base configurations are, circular or octagonal. In this study, the effective depth of improvement is evaluated based on the numerical analysis code, the dynamic analysis of FLAC-3D program, in order to analyze the influence parameters ; ground conditions, maximum applied load and the area of compaction plate.

  • PDF

심층혼합공법의 최저 개량 심도 결정에 관한 해석적 연구 (An Analytical Study on the Determination of the Lowest Improvement Depth of Deep Mixing Method)

  • 박춘식;송지원
    • 한국지반신소재학회논문집
    • /
    • 제19권1호
    • /
    • pp.35-44
    • /
    • 2020
  • 연약지반 개량 공법 중 심층혼합공법에 대한 설계 기법으로는 복합지반으로 해석하는 방법과 말뚝지반으로 해석하는 방법이 있다. 그러나 이러한 해석에 대한 비교 연구는 부족한 실정으로 설계 시 해석 기준을 명확하게 정의 내리는 것에 어려움이 있다. 본 연구에서는 2차원 및 3차원 해석을 통해 성토 높이와 연약지반의 심도, 보강구간의 치환율을 변화시키며 각 조건별로 복합지반과 말뚝지반을 가정하여 해석하였다. 그 결과 최저 개량 심도는 3차원 해석에 비해 2차원 해석 결과가 6.85~9.08% 더 깊은 결과를 도출하였다. 또한 말뚝지반 해석의 경우 복합지반 해석에 비해 개량 심도는 12.22~14.45% 더 깊은 것을 확인하였다. 이 결과를 통하여 보다 정확한 설계를 위해서는 2차원 해석보다는 3차원 해석을 실시해야 하고, 경제적인 설계를 위해서는 복합지반으로 해석해야 하며, 안정적인 설계를 위해서는 말뚝지반 해석을 실시해야 된다고 판단된다.

동다짐 공법의 개량심도 및 진동영향 예측을 위한 수치해석적 연구 (Numerical Study on the Prediction of the Depth of Improvement and Vibration Effect in Dynamic Compaction Method)

  • 이종휘;임대성;천병식
    • 한국지반공학회논문집
    • /
    • 제26권8호
    • /
    • pp.59-66
    • /
    • 2010
  • 본 연구에서는 동다짐 공법을 적용할 시 개량심도와 진동영향 예측을 유한요소해석을 통해 그 적용성을 규명하였다. 동다짐 공법이 적용된 기존 현장 조건에 따라 지반을 모델링하였으며, 동적하중 모델은 rigid body force를 적용하였다. 개량심도는 심도별 최대 연직 입자 가속도로 예측을 하여 기존 경험식과 비교 분석하였으며, 진동영향은 진동원으로부터 거리별 연직 최대 입자 속도를 도출하여 기존 경험식에 의한 값과 비교 분석하였다. 수치해석 결과, 개량심도의 경우 기존의 경험식과 비슷한 양상을 띄고 있으며, 진동영향의 경우는 기존 식과 특정 구간에서 차이를 보이고 있으나, 어느 정도 소요이격거리를 예측 할 수 있었다. 이들 해석결과는 경험적인 방법과 더불어 동다짐 설계의 신뢰도 향상을 위한 기초적인 자료가 될 것으로 보인다.

컬러 및 깊이 데이터 변환을 이용하는 입체감 향상 (Stereoscopic Perception Improvement Using Color and Depth Transformation)

  • 길종인;장성은;서주하;김만배
    • 방송공학회논문지
    • /
    • 제16권4호
    • /
    • pp.584-595
    • /
    • 2011
  • 최근 RGB 영상과 깊이맵이 동시에 제작되어 공급되고 있다. 깊이맵은 사용자의 용도에 따라 다양한 형태로 변환되어 입체영상 제작에 사용된다. 깊이맵을 활용하는 기법이 새로이 소개되고 있는데, 한 예로 의료 분야에서 2D 영상의 컬러를 변환하여 지각 깊이감을 개선하는 영상처리 기술에 대한 관심이 높아지고 있다. 본 논문에서는 기존의 컬러 변환을 통한 2D 영상의 지각 깊이감 개선을 입체영상에 적용하여, 3D 지각 깊이감을 동시에 향상시키는 방법을 제안한다. 이를 위해 대조 변환 및 배경 다크닝 방법을 제안하고, 실험을 통해 제안 방법이 상기 목적을 얻을 수 있는 것을 검증하였다. 주관적 실험에서는 입체감 향상 및 피로도 측정을 통해 제안 방법의 성능 및 단점을 제시하였다.

Optimum PVD installation depth for two-way drainage deposit

  • Chai, J.C.;Miura, N.;Kirekawa, T.;Hino, T.
    • Geomechanics and Engineering
    • /
    • 제1권3호
    • /
    • pp.179-191
    • /
    • 2009
  • For a two-way drainage deposit under a surcharge load, it is possible to leave a layer adjacent to the bottom drainage boundary without prefabricated vertical drain (PVD) improvement and achieve approximately the same degree of consolidation as a fully penetrated case. This depth is designated as an optimum PVD installation depth. Further, for a two-way drainage deposit under vacuum pressure, if the PVDs are fully penetrated through the deposit, the vacuum pressure will leak through the bottom drainage boundary. In this case, the PVDs have to be partially penetrated, and there is an optimum installation depth. The equations for calculating these optimum installation depths are presented, and the usefulness of the equations is studied by using finite element analysis as well as laboratory model test results.

치환율에 따른 심층혼합 처리공법의 최적 설계 (The Best Design of the Deep Mixing Method by the rate of substitution)

  • 박춘식;이준석;정원섭
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.123-131
    • /
    • 2009
  • 본 연구에서는 2차원 및 3차원 유한요소 해석을 이용하여 심층혼합처리 공법에 의한 연약지반 개량시 개량 심도를 결정 하였고, 그 결과는 다음과 같았다. 1. 2차원 해석 결과는 3차원 해석 결과 보다 약 10% 정도 크게 해석되었다. 2. 연약지반의 치환율이 5%이하 일 때 침하량은 급격히 증가하였다. 3. 심층혼합공법으로 연약지반 개량시 횡방향 간격 3m, 종방향 간격 6m, 그리고 8m의 심도로 개량하는것이 가장 경제적인 것으로 나타났다. 4. 심층혼합공법으로 연약지반 개량시 2차원 유한요소 해석보다 3차원 유한요소 해석으로 결정되어야 한다.

  • PDF

상호 구조에 기반한 초점으로부터의 깊이 측정 방법 개선 (Enhancing Depth Measurements in Depth From Focus based on Mutual Structures)

  • 무하마드 타릭 마흐무드;최영규
    • 반도체디스플레이기술학회지
    • /
    • 제21권3호
    • /
    • pp.17-21
    • /
    • 2022
  • A variety of techniques have been proposed in the literature for depth improvement in depth from focus method. Unfortunately, these techniques over-smooth the depth maps over the regions of depth discontinuities. In this paper, we propose a robust technique for improving the depth map by employing a nonconvex smoothness function that preserves the depth edges. In addition, the proposed technique exploits the mutual structures between the depth map and a guidance map. This guidance map is designed by taking the mean of image intensities in the image sequence. The depth map is updated iteratively till the nonconvex objective function converges. Experiments performed on real complex image sequences revealed the effectiveness of the proposed technique.

농업용수 수질측정망 자료 분석을 통한 농업용 호소의 수질관리방안 (Water Quality Management of Agricultural Lakes Through Analysis of Agricultural Water Quality Survey Network Data)

  • 김호일;김형중
    • 한국관개배수논문집
    • /
    • 제19권1호
    • /
    • pp.19-29
    • /
    • 2012
  • The data of the agricultural water quality survey network was analyzed between from 1990 to 2010 in order to propose effective plans for water quality management by analyzing the characteristics of agricultural lakes and the change of water quality. The result of the analysis shows that there is a correlation between water quality and items that can be a function of water depth such as dam height, dam length, dam height/dam length ratio and active storage/surface area of lake ratio. This means that, Korean agricultural lakes, there is a correlation between water quality and water depth. Water quality of the lakes that have lower than 5m of active storage/surface area of lake ratio (effective water depth) especially tends to get worse rapidly. The Chl-a and COD concentration of Korean agricultural lakes have a tendency to increase between June and September. Therefore, we recommend first taking a water quality improvement project for the lakes preformed watershed management project, and taking a preventive short-term water quality improvement project for the unperformed lakes before June among lakes that have lower than 5m of effective water depth.

  • PDF

공간구문론에의 거리가중개념 적용에 관한 심층 연구 (An In-depth Study on Applying Metric Weighting to Space Syntax)

  • 김민석;박근송
    • 대한건축학회논문집:계획계
    • /
    • 제34권12호
    • /
    • pp.49-54
    • /
    • 2018
  • Applying metric(distance) factor as weighting to spatial syntax is known to not contribute to the explanatory power for the human movement behavior as compared to the geometric(angle) factor according to the negative results of several related studies. However, Kim & Piao (2017) assumed that there is not a problem of the metric factor itself but a problem of the way of applying the metric factor as weighting, and presented a new possibility of the metric factor as weighting by proposing and verifying the methods of applying the metric weighting, which are different from the existing ones. The purpose of this study is to propose advanced methods of applying the metric weighting to space syntax, and to verify whether they contribute to the improvement of explanatory power of space syntax analysis. In this paper, we propose functions for combined depth of distance-step that combine the distance-weighted depth function with the step depth function and apply them to axial segment analysis to check the improvement of explanatory power of them.