• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.383-394
• /
• 2010

Flash memory based SSDs are currently being considered as a promising candidate for replacing hard disks due to several superior features such as shorter access time, lower power consumption and better shock resistance. However, SSDs have different characteristics from hard disk such as difference of unit and time for read, write and erase operation and impossibility for over-writing. Because of these reasons, SSDs have disadvantages on hard disk based systems, so FTL(Flash Translation Layer) is designed to increase SSDs' efficiency. In this paper, we propose an advanced logical address mapping method for increasing SSDs' performance, which is named HAMM(Hybrid Address Mapping Method). HAMM addresses drawbacks of previous block-mapping method and super-block-mapping method and takes advantages of them. We experimented our method on our own SSDs simulator. In the experiments, we confirmed that HAMM uses storage area more efficiently than super-block-mapping method, given the same buffer size. In addition, HAMM used smaller memory than block-mapping method to construct mapping table, demonstrating almost same performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_2
• /
• pp.559-565
• /
• 2013

Spatial resolution of land covers from remotely sensed images can be increased using super-resolution mapping techniques for soft-classified land cover proportions. A further development of super-resolution mapping technique is downscaling the original remotely sensed image using super-resolution mapping techniques with a forward model. In this paper, the model for increasing spatial resolution of remote sensing multispectral image is tested with real SPOT 5 imagery at 10m spatial resolution for an area in Bac Giang Province, Vietnam in order to evaluate the feasibility of application of this model to the real imagery. The soft-classified land cover proportions obtained using a fuzzy c-means classification are then used as input data for a Hopfield neural network (HNN) to predict the multispectral images at sub-pixel spatial resolution. The 10m SPOT multispectral image was improved to 5m, 3,3m and 2.5m and compared with SPOT Panchromatic image at 2.5m resolution for assessment.Visually, the resulted image is compared with a SPOT 5 panchromatic image acquired at the same time with the multispectral data. The predicted image is apparently sharper than the original coarse spatial resolution image.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.786-791
• /
• 2002

Mapping systems using Satellite Imagery has not been well-established compare to conventional Arial Photograph mapping systems. In order for satellite imagery to produce a stable quality of maps, it requires to follow the standard mapping procedures. In this satellite imagery study, we proposed four methods of mapping procedures. Mapping methods were established by generating trial maps and analyzing types of input data and functions of DPW (Digital Photogrammetric Workstation). On quantitative aspect, accuracy of each steps were measured by increasing 2 GCPs each time from the minimum of 6 GCPs. In DLT, with the minimum of 10 points, RMSE is 2 pixels at most. Besides that, interpretation and stereoscopic plotting using KOMPSAT-1 imagery and other simulated imagery was performed. The tests resulted that, for KOMPSAT-1 (6.6m) stereoscopic images, the possibility of interpretation is 44.79% and possibility of stereoscopic plotting is 43.75%. In the other hand, for simulated imagery (1m), the possibility of interpretation is 60.92% and possibility of stereoscopic plotting is 55.18%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1884-1887
• /
• 1997

The increasing concern over radiation exposure in the nuclear industry has fostered agrressive efforts to reduce the levels of radiation exposure. One area of the effot to reduce the radiation exposure is the development of a remote radiation monitoring system. Remote radiation monitoring can serve many benificaial functions reduce exposure to radiation by plant personnel, impruve the quality of the data that is collected and recognize the radiation environment easily. Radiation mapping system gives a good information that represents radiation level distribution. The system we have developed consists of a data acquistion parts, mobile robot and remote control parts. Data acquisition parts consist of radiation detection module and vision acquistion module which collect radiation data, visiion data and distance information. In remote control parts, the acquision data are processed and displayed. We have constructed radiation mapping image by overlaying the vision and radiation data. The radiation mapping techniques for displaying the results of the survey in an easily comprehendable form will facilitate a better understanding of the radiation environment in the facility. This system can reduce workers radiation exposure and aid to help work plan, so it has significant benifits in cost and safety.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.634-646
• /
• 2015

Coarse-Grained Reconfigurable Architecture (CGRA) is a very promising platform that provides fast turn-around-time as well as very high energy efficiency for multimedia applications. One of the problems with CGRAs, however, is application mapping, which currently does not scale well with geometrically increasing numbers of cores. To mitigate the scalability problem, this paper discusses how to use the SIMD (Single Instruction Multiple Data) paradigm for CGRAs. While the idea of SIMD is not new, SIMD can complicate the mapping problem by adding an additional dimension of iteration mapping to the already complex problem of operation and data mapping, which are all interdependent, and can thus significantly affect performance through memory bank conflicts. In this paper, based on a new architecture called SIMD reconfigurable architecture, which allows SIMD execution at multiple levels of granularity, we present how to minimize bank conflicts considering all three related sub-problems, for various RA organizations. We also present data tiling and evaluate a conflict-free scheduling algorithm as a way to eliminate bank conflicts for a certain class of mapping problem.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.15-27
• /
• 2003

Recently, the volume of data is increasing rapidly in server for multimedia service, according to development of multimedia application environment. In recent research for storage technology the technology like of the SAN(Storage Area Network) advantages in scalibility of storage devices, and can read data from multiple disk arrays through RAID 0, 5. The RAID 0 and 5 translate to logical address to physical address using equation, but in case of adding disks at the system with equation -based mapping, the problem that we must rearrange the whole data in the previous disks happens. We use the mapping table to solve this problem in recent, but we can not load the whole mapping table in main memory because it occupies too large space. Therefore the extra I/Os are demanded to evaluate real physical address of data, so total performance of the system is degraded. In this paper, we propose the mapping method that supports the scalibility in RAID 0 or 5 system. The proposing method applies small metadata, so- called SZIT and simple equation, so it is possible that we make translate logical address to physical address rapidly and it is scalable in disk extending simultaneously Our suggesting method, if we add disks to the striping system for expanding of storage capacity, has an advantage of never stop service. So, SZlT-based mapping method can do online-disk-expanding in real-time service.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1152-1154
• /
• 2003

The needs of 3-D data have been increasing for various applications like visualization, 3-D modeling, planning and management as well as entertainment. Mobile mapping has become a quick and practical means for acquiring necessary 3-D data for above-mentioned applications. A mobile mapping system mainly consists of two main components, viz. data acquisition devices and positioning devices. The data acquisition devices consist of CCD cameras or/and laser scanners. The positioning devices consist of GPS, INS, Odometer (shaft encoder) and some other referencing devices. The overall accuracy of mobile mapping system depends on the accuracy of positioning devices and their integrated output. Though, GPS is the main input device for the position information, the signal is not available for the computation of position all the times in urban area. The GPS satellites are normally obstructed by high-rise buildings. Thus it is very important to understand the accuracy of such a system in different environments and means to solve such problems. We have developed a mobile mapping system called VLMS (Vehicle-borne Laser Mapping System), which consists of CCD Cameras, Laser scanners, GPS, INS and Odometer. In this paper, we will present and discuss the accuracy of this system with data acquired in different environments (open area, urban area, tunnel, express way etc) by analyzing the data with respect to other existing digital data.

• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.69-81
• /
• 2005

As collaborative design and configuration design gain increasing importance in product development, it becomes essential to exchange parametric CAD models among participants. Parametric CAD models can be represented and exchanged in the form of a macro file or a part file that contains the modeling history of a product. The modeling history of a parametric CAD model contains feature specifications and each feature has selection information that records the name of the referenced topological entities. Translating this selection information requires solving the problems of how to identify the referenced topological entities of a feature (persistent naming problem) and how to convert the selection information into the format of the receiving CAD system (naming mapping problem). The present paper introduces the problem of exchanging parametric CAD models and proposes a solution to naming mapping.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.97-105
• /
• 2016

With the increasing demand for interoperability among existing learning resource systems in order to enable the sharing of learning resources, such resources need to be annotated with ontologies that use different metadata standards. These different ontologies must be reconciled through ontology mediation, so as to cope with information heterogeneity problems, such as semantic and structural conflicts. In this paper, we propose an ontology-mapping technique using Semantic Web Rule Language (SWRL) to generate semantic mapping rules that integrate learning resources from different systems and that cope with semantic and structural conflicts. Reasoning rules are defined to support a semantic search for heterogeneous learning resources, which are deduced by rule-based inference. Experimental results demonstrate that the proposed approach enables the integration of learning resources originating from multiple sources and helps users to search across heterogeneous learning resource systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.7
• /
• pp.2957-2980
• /
• 2020

Ensemble clustering commonly integrates multiple basic partitions to obtain a more accurate clustering result than a single partition. Specifically, it exists an inevitable problem that the incomplete transformation from the original space to the integrated space. In this paper, a novel ensemble clustering algorithm using a newly reconstructed mapping coefficient (ECRMC) is proposed. In the algorithm, a newly reconstructed mapping coefficient between objects and micro-clusters is designed based on the principle of increasing information entropy to enhance effective information. This can reduce the information loss in the transformation from micro-clusters to the original space. Then the correlation of the micro-clusters is creatively calculated by the Spearman coefficient. Therefore, the revised co-association graph between objects can be built more accurately because the supplementary information can well ensure the completeness of the whole conversion process. Experiment results demonstrate that the ECRMC clustering algorithm has high performance, effectiveness, and feasibility.