• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.880-885
• /
• 2005

RIB(Rigid Inflatable Boat)형 보트는 선체, 팽차식 선측튜브를 적용한 고속 다목적보트로 뛰어난 내항성능과 높은 안전성으로 해외 선진국에서는 해양레저 활동에 적합한 신개념 고부가가치 보트로 각광받고 있으나 국내에는 레저용 RIB 보트의 제작 및 개술개발 실적이 전무한 실정이다. 이에 본 연구에서는 고속이면서도 안정성 및 편의성을 고려한 레저용 RIB의 최적선형 설계 및 공간배치 연구, 하이파론 선측튜브 설계, 조선학적 제계산을 통한 주요성능 검토 등을 통하여 최근 급증하고 있는 해양레저 수요에 대응한 6m급 RIB형 레저보트를 개발하고자 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.606-613
• /
• 2007

The 6m class high speed boat is developed with a durable hull and inflatable tube, which is called RIB(Rigid Inflatable Boat), for the purpose of marine leisure. In the stage of the conceptual design, its requirements to be optimized are determined based on the presented information of similar marine leisure RIBs. The 3-D graphical technique using Marine Rhino is utilized to optimize the compartment layout of RIB. The stability analysis is performed for the light and full load conditions with and without the inflatable tube. In addition, the sea keeping and hydrodynamic performance was tested using the proto-type ship in the sea condition. From the results of the computation and the sea trial test, it shows that the performance of the marine leisure RIB satisfies the speed, the convenience, and the stability requirements. This study provides the typical information of the design factors and the procedure to manufacture the marine leisure RIB.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.128-133
• /
• 2006

This study is focused on the skill to prevent RIB (Rigid Inflatable Boat) from sinking. For better ability to prevent sinking, single hypalon tube is replaced by double TPU (Thermoplastic Polyurethane) tube that is excellent at frictional wear strength and oil-resisting qualities. High buoyant materials are arranged in empty spaces of ship so that ship's spare buoyancy is increased. And for restoration of stable position of ship, the self-righting system is installed. Aluminium alloy is used for increasing hull strength.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.329-331
• /
• 2022

국내 '수상레저기구 안전검사 기준(해양경찰청 고시)' 의 고무보트 안전검사 기준을 국제 표준 및 관련 법령(ISO-6185, 미국 ABYC 단체표준, 미국해양경비청 USCG, 뉴질랜드 해양법 NZ Maritime Law)과 비교를 통해 안정성(stability) 확보를 위하여 개선 방안을 제시하고자 한다. 현행 '수상레저기구 안전검사 기준'의 고무보트는 승선정원 13인 이상 및 특정 항해 구역에 대해서만 복원성 조건을 요구하고 있어 13인승 이하의 고무보트는 안정성 조건이 전무한 실정이다. 특히, 국제 표준 및 관련 법령과는 약 38개의 검사항목에 누락 또는 미흡한 차이가 있으며, 이에 국내 기준과 국제 표준과의 비교 분석을 통해 개인의 최소 안전을 담보 할 수 있는 고무보트의 안전성 확보 방안을 마련하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.488-503
• /
• 2012

The stern boat deployment system was investigated to evaluate the capability of launching and recovering rigid hull inflatable boat (RHIB) via the stern ramp. The main parameters to launch and recover RHIB were tested at the design stage. The combined hydrodynamic effect of the stern wake and the water jet flow made it difficult to maintain the maneuvering and sea-keeping ability of RHIB approaching to the stern ramp. The safe recovery course was proposed to maintain the directional control of RHIB and to reduce the combined hydrodynamic effect in the transom zone. To evaluate the feasibility of RHIB recovery, the stern sill depth was measured in various conditions and the ramp availability time was obtained. Also, the experimental percent time operability (PTO) test was performed by the number of successive launching and recovering operations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.99-104
• /
• 2015

Life rafts, which has been used for domestic vessel currently, are fabricated mostly for the ocean-going vessels in accordance with the SOLAS Resolution. Therefore, there is not any small-sized life raft which can be installed on small fishery boat, leisure boat and cargo vessel with those length shorter than 20 meters in our country. However, in many foreign countries, new standards or the small-sized life rafts applicable to those small vessel have been developed according to the standard of ISO 9650. Furthermore, they make their effort to contribute the safety for the life at sea by supply the superior product of life rafts, which have been adopted by light material (i.e. thermoplastic polyurethane, TPU) and economic production process (i.e. heat sealing, radio-frequency welding, RFW), etc. In this paper, the development results of the small-sized life raft, which has been used the lightening material TPU and fabricated by RF-welding method, will be introduced.

• 한국체육학회지인문사회과학편
• /
• v.53 no.2
• /
• pp.531-540
• /
• 2014

The purpose of this study was to investigate the differences between two inflatable kayak by recording performance related variables during the kayak forward stroke motion. A total of 5 elite high school kayak players were recruited to participate while their kinematics and muscle activations were recorded while performing inside their high school swimming pool. Boat velocity, boats swaying angle, the average angular velocity and were used to evaluate the boats performance. The player's trunk rotational range of motion, knee flexion-extension angle range of motion, maximum trunk rotation angle, the knee flexion-extension angular velocity, and the upper and lower limb muscle activations were calculated and analyzed for the player's efficiency evaluation. There were no significantly different variables for the player's kinematics and their muscle activations for the two conditions. The B kayak was significantly faster than the A kaya. In addition there were no significant differences between the remaining variables for the two kayaks. In conclusion, the B kayak was faster than the A kayak, but neither of the kayaks had an influence on the player's performance variables.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.462-468
• /
• 2010

A new course keeping controller for RIB(Rigid Inflatable Boat)-type USV(Unmanned Surface Vehicle) is developed using pilot's steering pattern. A pilot's simple steering pattern is found out from various course change tests. It is used to course keeping algorithm, suitable for large course change more than 60 degrees. To validate the course keeping controller, sea trial tests are conducted. From sea trial test, new course keeping controller shows good performance with less overshoot, maximum roll angle less than $20^{\circ}$, which makes it possible that fast course changes without slip motion of USV.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.572-578
• /
• 2007

A Rigid Inflatable Boat (RIB) is now widely used for commercial and military purpose. In this paper, it is supposed that seven-meter-class RIB be used as an unmanned target ship for naval training. In order to develop many tactical maneuvering patterns of a target ship, a simple horizontal maneuvering model of a RIB is needed. Therefore, models of speed and yaw rate are constructed as the first-order differential equations based on Lewandowski#s empirical formula for steady turning circle diameter of a conventional planning hull. Some parameters in the models are determined using the results of sea trial tests. Finally, proposed models are validated through the comparison of the simulation result with the sea trial result for a specific scenario. Even though a simple model does not represent the horizontal motion of a RIB precisely, however, it can be used enough to develop tactical trajectory patterns.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.8-14
• /
• 2011

RIB(Rigid Inflatable Boat) is widely used for coastal transportation in the commercial use and for ISR(Intelligence, Surveillance, Reconnaissance) in the military use. Since RIB is around 10 meters in length and over 30 knots in speed, its motion characteristics in waves is quite different from a large scale ship. When it turns, large roll occurs and heeling direction is opposite to the large ship's case. Currently, many countries are developing USV(Unmanned Surface Vehicle) of which type is RIB. In order to develop high performance autopilot and way point controller, it is very important to identify RIB's motion characteristics. In this paper, sea trial test results of a 7-meter RIB such as speed, turning, zig-zag, and way point control tests were represented and its resistance and propulsion model was identified by using sea trial data and Savitsky's formula. In addition, the state space model which will be used in the identification of the four-degree-of-freedom dynamics in the next step was formulated and the identification procedure was proposed.