• 비파괴검사학회지
• /
• 제34권3호
• /
• pp.248-253
• /
• 2014

카메라 영상 캘리브레이션은 머신비전과 같은 비전검사기술분야에서 영상으로부터 기하학적 정보를 정확하게 추출하고자 할 때 정확성을 높이는데 필요한 매우 중요한 과정이다. 그러나 기존에 가시광 카메라에 사용되던 캘리브레이션 타겟은 중적외선, 원적외선 열화상 카메라에 적용하기 어렵다. 최근에 적외선 열화상카메라를 이용한 결함측정기술이 많이 사용되면서 적용할 수 있는 캘리브레이션 타겟 개발이 요구되고 있다. 따라서 본고에서는 유한요소 열전달 해석을 이용하여 가시광 카메라와 적외선 열화상카메라 모두에 적용 가능한 캘리브레이션 타겟을 제안하였다. 개발된 캘리브레이션 타겟을 열화상카메라와 가시광 카메라로 촬영하여 비교실험 하였으며, 실험결과 제안된 캘리브레이션 타겟의 효율성을 보여준다.

• 한국의류학회지
• /
• 제43권4호
• /
• pp.592-604
• /
• 2019

This study examines the stealth function of sputtered fabric with an infrared thermal imaging camera in terms of the thermal and infrared (IR) transmittance characteristics. Various base fabrics were selected, infrared imaging was performed, and infrared transmittance was measured. By infrared camera experiment it was found that the sample was concealed because it had a similar color to the surroundings when the aluminum layer was directed toward the outside. In addition, a comparison of the infrared thermographic image of the untreated sample and the sputtered sample in the laboratory showed that the difference in ${\Delta}E$ value ranged from 31 to 90.4 and demonstrated effective concealment. However, concealment was not observed in the case of the 3-layer (Nylon-Al-Nylon) model when a sputtered aluminum layer existed between two nylon layers. The direction of the sputtering layer did not affect the infrared transmittance in the infrared transmittance experiment. Therefore, it seems better to interpret the concealing effect in the infrared thermographic images by using thermal transfer theory rather than infrared transmittance theory. We believe that the results of this study will be applicable to developing high performance smart clothing and military uniforms.

• 한방재활의학과학회지
• /
• 제27권3호
• /
• pp.107-115
• /
• 2017

Objectives This study is planned to classify correlation between HIVD of L-spine MRI and Digital Infrared Thermal Image (DITI). Methods We measured the temperature of both leg whose 120 men and 116 women patients with lumbar pain in Bucheon Jaseng Korean Medicine Hospital. And We use Magnetic Resonance Imaging (MRI) for classifying the patients who has lumbar intervertebral disc or not. Results 1) There was no statistical relation between difference of both leg's temperature and gender (p>0.05). 2) There was meaningful statistical relation between difference of both leg's temperature and age (p<0.05). 3) There was meaningful statistical relation between direction of HIVD of L-spine and direction of temperature reduction. 4) There was meaningful statistical relation between the severity of HIVD of L5/S1 and degree of temperature reduction. But there was no statistical relation between the severity of HIVD of L3/4, L4/5 and degree of temperature reduction. Conclusions We can use Digital Infrared thermal image (DITI) on low back pain patients for diagnosis. But we should not use DITI alone. DITI has limit in diagnosis.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권5호
• /
• pp.365-371
• /
• 2019

We have developed and applied a diagnostic Multi-Leaf Collimator (MLC) to optimized the X-ray field in medical imaging and the usefulness evaluated through the fusion of infrared image and X-ray image acquired by infrared camera. The hand and skull radiography with multi-leaf collimator(MLC) showed significant area dose reductions of 22.9% and 31.3% compared to ARC and leakage dose was compliant with KS A 4732. Also scattering doses of 50 cm and 100 cm showed a significant decrease to confirm the usefulness of MLC. It was confirmed that the fusion of infrared images with an adjustable degree of transparency was possible in the X-ray images. Therefore, fusion of anatomical information with physiological convergence is expected to contribute and improvement of diagnostic ability. In addition, the feasibility of convergence X-ray imaging and DITI devices and the possibility of driving MLC with infrared images were confirmed.

• 지적과 국토정보
• /
• 제48권1호
• /
• pp.71-91
• /
• 2018

최근 영농분야에서 종자파종, 병충해 방제 등에 무인항공기(UAV ; Unmanned Aerial Vehicle)를 활용한 응용이 활발히 진행되고 있다. 본 연구는 UAV에 다양한 파장대의 영상센서를 탑재하고 SfM(Structure from Motion) 영상해석기법과 연계한'고해상 저고도 원격탐측시스템(UAS ; Unmanned Aerial System)'를 구성, UAS 기반 식생조사의 효용성을 고찰하여 정밀영농의 활용성을 검토하였다. 이를 위해 저가 UAV에 가시 컬러(VIS_RGB ; Visible Red, Green, and Blue) 영상센서, 수정된 BG_NIR(Blue Green_Near Infrared Red) 근적외 영상 센서, $7.5{\sim}13.5{\mu}m$ 분광대역의 열적외 영상(TIR ; Thermal Infrared Red)센서를 조합 연계한 UAS를 구성하였다. 또한, 가시 근적외 및 열적외 파장대를 기본요소로 광합성에 따른 식물의 엽록소, 질소 및 수분 함유량 등을 검토할 수 있는 총 10종의 식생지수를 선정, 식생상태 검출에 활용하였다. 시험대상지에 대한 각 파장대역의 영상을 획득하고 사전에 조사된 지상 피복현황을 기준으로 각 식생지수의 분포도 및 식생지수 간 상관성(결정계수 R2) 등을 비교 고찰하여 무인항공기를 활용한 가시 컬러, 근 적외 및 열 적외 영상에 의한 식생상태의 검측 수행능력을 검토하였다. 저가 무인항공기에 VIS_RGB, BG_NIR 및 TIR 영상 센서를 탑재, 식생조사의 효용성을 종합적으로 검토한 결과, 인공위성과 항공영상에 의존한 과거의 식생조사방식 대비, 영상해상도, 경제성 및 운용성 면에서 UAV기반 고해상 저고도 원격탐측시스템(UAS)의 효용성을 입증할 수 있었으므로 정밀농업, 수계 및 산림조사 등의 분야에 그 활용이 기대된다.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.39-45
• /
• 2017

In this paper, we propose three compensation methods to solve problems in high-resolution airborne infrared camera and to improve long-range target information acquisition performance. First, image motion and temporal noise reduction technique which is caused by atmospheric turbulence. Second, thermal blurring image correction technique by imperfect performance of NUC(Non Uniformity Correction) or raising the internal temperature of the camera. Finally, DRC(Dynamic Range Compression) and flicker removing technique of 14bits HDR(High Dynamic Range) infrared image. Through this study, we designed techniques to improve the acquisition performance of long-range target information of high-resolution airborne infrared camera, and compared and analyzed the performance improvement result with implemented images.

• Journal of Acupuncture Research
• /
• 제18권1호
• /
• pp.1-13
• /
• 2001

The Background and Purpose : Most diagnostic method for the facial palsy were invasive and complex. And we don't know very well prognosis for the recovery of facial palsy in the first stage after the onset. But the Digital Infrared Thermal Image(DITI) isn't invasive and complex diagnostic method for the facial palsy. So we should study on the clinical prognostic diagnosis of Bell's palsy among facial palsy with the DITI. Objective and Methods : This study researched into the clinical statistics for 89 case who are in Bell's palsy, and they are treated with oriental medical care at the Woosuk university during 2 years form November 1998 to October 2000. All objectives have the Grade 6(Zero state) of Bell's palsy in first week after the onset. It takes a patient's facial temperature after the onset. Group A is taken from 1 day to 4 days after the onset. Group B is taken from 5 day to 8 days after the onset. And group C is taken from 9 day to 12 days after the onset. Results and Conclusions : The Digital Infrared thermal image technique showed the more high temperature, the more rapid cure and short treatment period on TE23, B2, S3, S6 in abnormal site of Bell's palsy. But it showed the more low temperature, the more rapid cure and short treatment period on TE17 of abnormal site of Bell's palsy. As a conclusion, we could think that the prognostic diagnosis of Bell's palsy closely related with the thermal difference normal and abnormal site of Bell's palsy that were took picture after the onset.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.493-505
• /
• 2023

Comprehensive condition monitoring of large industry systems such as nuclear power plants (NPPs) is essential for safety and maintenance. In this study, we developed novel system-scale diagnostic technology based on deep-learning and IR thermography that can efficiently and cost-effectively classify system conditions using compact Raspberry Pi and IR sensors. This diagnostic technology can identify the presence of an abnormality or accident in whole system, and when an accident occurs, the type of accident and the location of the abnormality can be identified in real-time. For technology development, the experiment for the thermal image measurement and performance validation of major components at each accident condition of NPPs was conducted using a thermal-hydraulic integral effect test facility with compact infrared sensor modules. These thermal images were used for training of deep-learning model, convolutional neural networks (CNN), which is effective for image processing. As a result, a proposed novel diagnostic was developed that can perform diagnosis of components, whole system and accident classification using thermal images. The optimal model was derived based on the modern CNN model and performed prompt and accurate condition monitoring of component and whole system diagnosis, and accident classification. This diagnostic technology is expected to be applied to comprehensive condition monitoring of nuclear power plants for safety.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.444-447
• /
• 2003

All objects with some temperature above absolute zero radiate in the infrared. The intensity of the infrared radiated from a object defends on the condition and temperature on the surface of the one. The present, these techniques are frequently adopted into diagnosis for electricity equipments. Simply, however, the applied techniques are passive thermal testing for the detection of loosened terminals and overcurrent. In this paper, a infrared thermal imager was applied to high voltage windings of cast resin transformers, and the accumulated value of the result temperatures was used for evaluating remained lifetime of them. At each aging level, dielectric loss tangent test was carried out. The results offered capabilities for deciding the condition of the transformers suffering difficulties to diagnose.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.666-671
• /
• 2012

It was diagnosed customer transformers and other equipment by using non-contact infrared equipment. Examiners can identify not only abnormalities in real time in the field of the transformer immediately, as well as they were able to safely perform the scan. Thanks to successful transformer diagnosis, we can easily diagnose abnormalities of transformer itself which can be caused by deterioration of the oil used as overlaod or refrigerant and we can also diagnose abnomalities from low voltage bushing which can be result by external environmental factors and physical factors and abnomalities from its connections at the same time we found it is very useful at proactive diagnostics.