• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1205-1210
• /
• 2004

The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.207-219
• /
• 2004

This paper presents the development of a knowledge-based control system operating via the Internet. With the synergy provided by the Internet, the central expert controller with its knowledge-base has the potential to serve a multitude of front-end clients located anywhere in the world provided they have Internet access. In this way, the operational span of the knowledge-based control system can be expanded to virtually anyplace within the reach of the Internet. This configuration has positive implications in improving the efficiency of distributed operations, thereby enabling plantwide optimization and costs savings. Datasocket technology is adopted to facilitate a more efficient data exchange between the knowledge-based central server and the front-end clients. A specific application in the remote monitoring and fault diagnosis of machines using the proposed control configuration is presented in the paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.3
• /
• pp.273-279
• /
• 2004

This research is concerned with the development of an Internet-based robot system, which is insensitive to the unpredictable internet time delay. For this purpose, a simple mobile robot system that moves in response to the user s direct control on the internet has been developed. The time delay in data transmission is an important problem for the construction of this kind of system. Therefore, the PPS (Position Prediction Simulator) is suggested and implemented to compensate for the time delay problem of the internet. The simulation and experimental results show that the distance error can be reduced using the developed PPS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.196-203
• /
• 2003

Recent increase in accessibility to the internet makes it easy to use the internet-connected devices. The internet could allow any user can reach and command any device that is connected to the network. But these teleoperation systems using the internet connected device have several problems such as the network time delay, data loss and development cost of an application for the communication with each other. One feasible solution is to use local and external network line for the network time delay, transmission control protocol for data loss and Java language to reduce the development period and cost. In this study, web-based remote control system using Java language is newly proposed and implemented to a pneumatic servo control system to solve the time delay, data loss and development cost. We have conducted several experiments using pneumatic rodless cylinder through the internet and verified that the proposed remote control system was very effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2266-2270
• /
• 2005

In this paper, an internet based control application for dynamical systems is implemented. This implementation is maily targeted for the part of advanced control education. Intelligent control algorithms are implemented in a PC so that a client can remotely access the PC to control a dynamical system through the internet. Neural network is used as an on-line intelligent controller. To have on-line learning and control capability, the reference compensation technique is implemented as intelligent control hardware of combining a DSP board and an FPGA chip. GUIs for a user are also developed for the user's convenience. Actual experiments of motion control of a DC motor have been conducted to show the performance of the intelligent control though the internet and the feasibility of advanced control education.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.837-840
• /
• 2003

Recently the multimedia streaming traffic such as digital audio and video in the Internet has increased tremendously. Unlike TCP, the UDP protocol, which has been used to transmit streaming traffic through the Internet, does not apply any congestion control mechanism to regulate the data flow through the shared network. If this trend is let go unchecked, these traffic will effect the performance of TCP, which is used to transport data traffic, and may lead to congestion collapse of the Internet. To avoid any adverse effort on the current Internet functionality, A study on a new protocol of modification or addition of some functionality to existing transport protocol for transmitting streaming traffic in the Internet is needed. TCP-frienly congestion control mechanism is classified with window-based congestion control scheme and rate-based congestion control scheme. In this paper, we propose an algorithm for improving the transmitting rate on a hybrid TCP-friendly congestion control scheme combined with widow-based and rate-based congestion control for multimedia streaming in the internet.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.622-627
• /
• 2003

The existing remote control system have some inherent disadvantage of direct control in the limit range. In some special cases, for example, a power apparatus, an unmanned factory, a nuclear factory, a security management system, the tele-operation is needed to control remote robot without limit space. This field is based on the Internet communication. Because the Internet is constructed all over the world. And it is possible that we control remote mobile robot in the long distance. In this paper, we developed a remote control system. This system is divided into two primary parts. These are local site and remote site. There are the moving robot and web server in the remote site and there is the robot control device in local site. The moving robot is moved by two stepper motors and the robot control device consists of SA-1100 micro controller and embedded Linux. And this controller is an embedded system. Public personal computer which is connected the Internet is used for the web server. The web server provides the mobile robot control interface program to the remote controller and captures the image for feedback information. In the whole system, a robot control device is connected with moving robot and web server through the Internet. So the operator can control the moving robot in the distance through the Internet.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.7
• /
• pp.279-285
• /
• 2002

This Paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. in this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost, and we used RS-485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet. As the result for experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.3
• /
• pp.179-184
• /
• 2002

Recently, internet-based applications can be found easily in various felds. Internet-based telerobot system becomes one of important applications of internet. Among many important technological issues on the internet-based telerobot, time-delay is inherently critical problem to be solved. Time-delay is classified as micro time-delay and macro time-delay in this paper. Algorithms for compensation of path-error and time-error are proposed for the both types of time-delays using fuzzy logic since fuzzy logic is one of the best tools to represent expert's knowledge. Simulation results show the validity of the proposed algorithms.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.220-227
• /
• 2004

This paper describes the design and implementation techniques of a generic Internet-based telerobotic system. The purpose is to make available the precious technical information and hands-on experience of the authors for the research community. The paper is based on the telerobotics system that the authors recently implemented between KAIST, Korea and Saga University, Japan. In its current functionality, two control modes: high-level supervisory control and low-level supervisory control are explored demonstrating their merits and demerits.