• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.178-188
• /
• 2010

This paper addresses the problem of determining if two surfaces intersect tangentially or transversally in a mathematically consistent manner and approximating an intersection curve. When floating point arithmetic is used in the computation, due to the limited precision, it often happens that the decision for tangential and transversal intersection is not clear cut. To handle this problem, in this paper, interval arithmetic is proposed to use, which provides a mathematically consistent way for such decision. After the decision, the intersection is traced using the validated ODE solver, which runs in interval arithmetic. Then an iterative method is used for computing the accurate intersection point at a given arc-length of the intersection curve. The computed intersection points are then approximated by using a B-spline curve, which is provided as one instance of intersection curve for further geometric processing. Examples are provided to demonstrate the proposed method.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.269-283
• /
• 1999

Surface/surface intersection is a common and important problem in geometric modeling and CAD/CAM. Several methods have been used to approach this problem. All possible intersection curves can be obtained by using the subdivision algorithm, while it requires a great deal of memory and is somewhat inefficient. The tracing algorithm is much faster than the subdivision algorithm, and can find points on the intersection curve sequentially. But, the tracing algorithm has some problems in the intersection curves on surface boundaries. In this paper, an Improved tracing algorithm that includes some ideas such as a new trace-terminating condition for the intersection curves on surface boundaries, detecting closed intersections and extension for composite surfaces is suggested. This algorithm consists of three step: generating state points for curve tracing, tracing intersection curves and sorting pieces of the intersection curves. The results of this algorithm and comparisons to the 'DESIGNBASE' and 'ACIS' system are presented.

• 대한수학회보
• /
• 제37권4호
• /
• pp.829-841
• /
• 2000

We classify complete intersections I of grade 3 in a regular local ring (R, M) by the number of minimal generators of a minimal prime ideal P over I. Here P is either a complete intersection or a Gorenstein ideal which is not a compete intersection.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.65-70
• /
• 2009

In-vehicle route guidance information(RGI) systems have been developed with the advancement of the information and communication technologies. However, the RGI is provided by a pre-determined option, drivers occasionally pass the target intersection owing to non- or late- recognizing it. The purpose of this experiment is to examine the position of driver's tum signal operation and intersection recognition approaching at the target intersection which is difficult to identify as a preliminary research on developing the additional RGI connecting with the tum signal control. The field experiment was conducted to measure distances of the turn signal operation and intersection recognition from the target intersection according to driving lanes and landmarks at adjacent intersection. And, glance behavior to the car navigation display was evaluated by using an eye camera. The results indicate that drivers operate the turn signal after confirming a landmark in the case of the intersection with it. However, most case of driving, drivers operate the tum signal at 40 to 50m before coming to the target. To provide the additional RGI, when drivers do not operate the tum signal approaching at the target intersection based on the results, is expected to improve the traffic safety and the comfort for drivers.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제55권3호
• /
• pp.335-355
• /
• 2016

The purpose of this study is to analyze tasks to find intersection points of a function and its inverse function. To do this, we produced a task and 64 people solved the task. As a result, most people had a cognitive conflict related to inverse function. Because of over-generalization, most people regarded intersection points of a function and y=x as intersection points of a function and its inverse. To find why they used the method to find intersection points, we investigated 10 mathematics textbooks. As a result, 23 tasks were related a linear function, quadratic function, or irrational function. 21 tasks were solved by using an equation f(x)=x. 3 textbooks presented that a set of intersection points of a function and its inverse was not equal to a set of intersection points of a function and y=x. And there was no textbook to present that a set of intersection points of a function and its inverse was equal to a set of intersection points of $y=(f{\circ}f)(x)$ and y=x.

• Korean Journal of Mathematics
• /
• 제30권2호
• /
• pp.263-281
• /
• 2022

The main aim of this paper is to discuss two different types of soft hemirings, soft intersection and soft union. We discuss applications and results related to soft intersection hemirings or soft intersection k-ideals and soft union hemirings or soft union k-ideals. The deep concept of k-closure, intersection and union of soft sets, ∧-product and ∨-product among soft sets, upper 𝛽-inclusion and lower 𝛽-inclusion of soft sets is discussed here. Many applications related to soft intersection-union sum and soft intersection-union product of sets are investigated in this paper. We characterize k-hemiregular hemirings by the soft intersection k-ideals and soft union k-ideals.

• 대한의용생체공학회:의공학회지
• /
• 제36권3호
• /
• pp.61-68
• /
• 2015

In this paper, we studied the effects of intersection angles of the flow-foucusing type droplet generation device inlet channel on droplet diameter using numerical simulation modeling. We modeled different intersection angles with a fixed continuous channel width, dispersed channels width, orifices width, and expansion channels width. Numerical simulations were performed using COMSOL Multiphysics$^{(R)}$ to solve the incompressible Navier-Stokes equations for a two-phase flow in various flow-focusing geometries. Modeling results showed that an increase of the intersection angle causes an increase in the modification of the dispersed flow rate ($v^{\prime}{_d}$), and the increase of the modification of the continuous flow rate ($v^{\prime}{_c}$) obstructs the dispersed phase fluid flow, thereby reducing the droplet diameter. However, the droplet diameter did not decrease, even when the intersection angle increased. The droplet diameter decreased when the intersection angle was less than $90^{\circ}$, increased at an intersection angle of $90^{\circ}$, and decreased when the intersection angle was more than $90^{\circ}$. Furthermore, when the intermediate energy deceased, there was a decrease in the droplet diameter when the intersection angle increased. Therefore, variations in the droplet diameter can be used to change the intersection angle and fluid flow rate.

• 한국ITS학회 논문지
• /
• 제19권1호
• /
• pp.83-93
• /
• 2020

지체시간은 신호교차로의 교통혼잡 수준을 나타내는 주요 지표로 활용되고 있다. 교통정체가 발생하는 대치역사거리와 비교적 교통상황이 원활한 영동5교 사거리를 비교 대상구간으로 선정하여, 현장조사를 기반으로 한 평균지체시간과 다양한 시뮬레이션 프로그램을 통하여 산출한 지체시간을 비교·분석하였다. 현장조사데이터와 신호교차로 분석 모형의 평균 제어지체 비교·분석결과 KHCS는 대치역사거리 7.7초/대, 영동5교사거리 7.9초/대의 차이를 보였으며, VISSIM은 대치역사거리 21.1초/대, 영동5교사거리 8.1초대의 차이로 분석되었다. T7F는 대치역사거리 3.3초/대, 영동5교사거리 9.3초/대의 결과값 차이로 분석되었다. 동일한 교차로를 분석하더라도 시뮬레이션 모형별로 결과값이 차이가 나는 것을 증명하였다.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.200-207
• /
• 2007

The passive direction finding cross localization method is widely adopted in passive tracking, therefore there will exist masses of false intersection points. Eliminating these false intersection points correctly and quickly is a key technique in passive localization. A new method is proposed for passive locating and tracking multi-jammer target in this paper. It not only solves the difficulty of determining the number of targets when masses of false intersection points existing, but also solves the initialization problem of elastic network. Thus this method solves the problem of multi-jammer target correlation and the elimination of static false intersection points. The method which dynamically establishes multiple hypothesis trajectory trees solves the problem of eliminating the remaining false intersection points. Simulation results show that computational burden of the method is lower, the elastic network can more quickly find all or most of the targets and have a more probability of locking the real targets. This method can eliminate more false intersection points.

• 한국CDE학회논문집
• /
• 제12권5호
• /
• pp.344-353
• /
• 2007

In this paper, we address the problem of robust geometric modeling with emphasis on surface to surface intersections. We consider the topology and the numerical accuracy of an intersection curve to find the best approximation to the exact one. First, we perform the topological configuration of intersection curves, from which we determine the starting and ending points of each monotonic intersection curve segment along with its topological structure. Next, we trace each monotonic intersection curve segment using a validated ODE solver, which provides the error bounds containing the topological structure of the intersection curve and enclosing the exact root without a numerical instance. Then, we choose one approximation curve and adjust it within the bounds by minimizing an objective function measuring the errors from the exact one. Using this process, we can obtain an approximate intersection curve which considers the topology and the numerical accuracy for robust geometric modeling.