• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.798-806
• /
• 2017

A activated carbon (WCAC, waste citrus activated carbon) prepared from an agricultural waste citrus peel material generated in Jeju was utilized for the removal of dimetridazole (DMZ) antibiotics in aqueous solution. The adsorption of DMZ on WCAC was investigated with the change of various parameters such as contact time, dosage of WCAC, particle size of WCAC, temperature, pH, and DMZ concentration. The DMZ adsorption capacity increased with increasing temperature and decreasing particle size. Also it was decreased at less than pH 4 but sustained almost constantly at pH 4 or greater. Isotherm parameters were determined from the Langmuir, Freundlich, Redlich-Peterson and Duinin-Radushkevich (D-R) isotherm models. The isotherm data were best described by the Redlich-Peterson isotherm model. And the adsorption kinetics can be successfully fitted to the pseudo-second-order kinetic model. The results of the intra-particle diffusion model suggested that film diffusion and intra-particle diffusion were occurred simultaneously during the adsorption process. Meanwhile, the thermodynamic parameters indicated that the adsorption reaction of DMZ on WCAC was an endothermic and spontaneous process. The experimental results showed that WCAC is a promising and cheap adsorbent for the removal of DMZ antibiotics.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.593-602
• /
• 1988

Polymer-supported crown ethers (Ps-CE) which can be used for phase-transfer catalyst (PTC) were synthesized for the purpose of allowing reusable function to ordinary crown ethers, and the kinetics of the liquid-solid-liquid triphase-catalyzed nucleophilic displacement reaction of iodide (aqueous phase) on 1-bromooctane (organic phase) using synthesized Ps-CE (solid) were studied. Ps-CE were obtained by grafting of hydroxymethyl crown ethers to 1~2% cross-linked chloromethylated polystyrene. All reactions followed a pseudo-first order dependency on the 1-bromooctane concentration and the observed rate constants $(k_{obsd})$ were linearly related to the molar equivalents of Ps-CE, and were subjected to the influence of cross-linking density of polymer backbone, solvent and the reaction temperature. The catalytic activity of Ps-CE was also compared with that of structurally similar soluble crown ethers, and used Ps-CE were easily recovered after the reaction by simple filtration and could be reused without loss of catalytic activity in the same anionic displacement reaction. Enthalpies and entropies of activation associated with the displacement were 10~20kcal $mol^{-1}, 20~55eu. respectively, and the free energy of activation was ~30kcal mol^{-1}$.

• Physical Therapy Korea
• /
• v.15 no.1
• /
• pp.38-45
• /
• 2008

This study investigated gait characteristics, kinematics, and kinetics in the lower extremities between two different shoe conditions (high heeled shoes (7 cm), and high heeled shoes with a total contact insert (TCI)) after lower extremity muscle fatigue. Although TCI shave been applied in high heeled shoes to increase comfort and to decrease foot pressure, no study has attempted to identify the effects of TCI in fatigue conditions. The purpose of this study was to determine the effects of walking in high heeled shoes with TCI after lower extremity muscle fatigue was induced. This study was carried out in a motion analysis laboratory at Hanseo University. A volunteer sample of 14 healthy female subjects participated. All in fatigue conditions, the subjects were divided into two groups. The muscle fatigue was induced by 40 voluntary dorsi- and plantar-flexion exercises and 40 heel-rise exercises of the dominant foot. Surface electromyography was used to confirm the localized muscle fatigue using power spectral analysis of three muscles (tibialis anterior, gastrocnemius medialis and lateralis). The results were as follows: (1) In muscle fatigue conditions, the use of TCI decreased the peak flexion angle of the hip joint significantly in the early stance phase (p<.05) and increased the peak hip flexion moment in the terminal stance phase (p<.05). (2) In muscle fatigue conditions, the application of TCI also increased peak hip power generation in the early stance phase and peak hip power absorption in the terminal stance phase (p<.05). (3) In muscle fatigue conditions, the use of TCI reduced the impact force significantly and increased the secondary peak vertical GRF. These findings suggest that the TCI may provide beneficial effects when muscle fatigue occurs for a high heeled shoe gait. Future research employing the patient population and various types of TCI materials are required to clarify the effects of TCI.

• Nuclear Engineering and Technology
• /
• v.15 no.3
• /
• pp.197-206
• /
• 1983

The slightly hyperstoichiometric uranium dioxide, i.e. U $O_{2.005}$ and U $O_{2.01}$ within a range of the requirement for the use of a nuclear fuel, were sintered directly in an atmosphere of $CO_2$/CO mixture without any succeeding reduction process. The kinetics of sintering in the late stage were investigated for various O/U ratios. A sintering diagram, which show the relation of Temperature-Time-Density-Grain size, was established for each O/U ratio. Only by controlling the oxygen partial pressure in the sintering atmosphere, U $O_2$ pellet could be sintered very easily at low temperature 1050$^{\circ}$～120$0^{\circ}C$ with a density above 95% T.D. and average grain size above 7${\mu}{\textrm}{m}$. It was found that the rate of grain growth follows D=(Kt)$^{1}$4/ in the late stage of sintering. And the activation energies for grain growth in the final sintering stage were found to be 75, 64 and 62kca1/mo1 for U $O_{2.005}$, U $O_{2.01}$ and U $O_{2.10}$, respectively. Although no significant differences are obtained between the activation energies for different O/U ratios, the sinterability is enhanced considerably with increasing the oxygen partial pressure in the sintering atmosphere.tmosphere.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.273-277
• /
• 2005

This study was performed to develop new cosmeceutical agents with sebosuppressive activity from native plant extracts in Korea. Inhibitory efforts of the extracts on $5{\alpha}-reductase$ (5-AR) were evaluated by enzyme kinetics analysis using UV-spectrophotometric method. Two kinds of enzyme suspensions as 5-AR sources were prepared from rat liver tissue and cultured hSG cells. The sebosuppressive effects were determined by measuring the total lipid quantity produced in cultured hSG cells after incubation with the extracts. As a result, Pinus thunbergii extracts showed the most potent 5-AR inhibitory effects. Its $K_i$ values were 0.0002% and 0.0014% for rat liver 5-AR and human sebaceous gland 5-AR, respectively. Addition of Pinus thunberii extract to hSG cells showed 48% reduction in total lipid production at 0.005% concentration. In conclusion, Pinus thunbergii extracts can be used as a cosmeceutical agent to regulate sebum production and to alleviate the sebum-involved skin diseases, such as acne and seborrheic dermatitis.

• Archives of Pharmacal Research
• /
• v.25 no.5
• /
• pp.718-723
• /
• 2002

CKD-602 (7-[2-(N-isopropylamino)ethyl]-(20S)-camptothecin) is a recently-developed synthetic camptothecin analogue and currently under clinical development by Chong Kun Dang Pharm (Seoul, Korea). CKD-602 showed potent topoisomerase inhibitory activity in vitro and broad antitumor activity against various human tumor cells in vitro and in vivo in animal models. This study describes the pharmacodynamics of the immediate and delayed cytotoxicity induced by CKD-602 in a human colorectal adenocarcinoma cell line, HT-29, and its intracellular drug accumulation by HPLC. The present study was designed to address whether the higher activity of CKD-602 with prolonged exposure is due to delayed exhibition of cytotoxicity and/or an accumulation of anti proliferative effect on continuous drug exposure. The drug uptake study was performed to determine whether the delayed cytotoxicity is due to a slow drug accumulation in cells. CKD-602 produced a cytotoxicity that was exhibited immediately after treatment (immediate effect) and after treatment had been terminated (delayed effect). Both the immediate and delayed effects of CKD-602 showed a time dependent decrease in 4IC_{50}$ values. Drug uptake was biphasic and the second equilibrium level was obtained as early as at 24hr, indicating that the cumulative and delayed antitumor effects of CKD-602 were not due to slow drug uptake. On the other hand, CKD-602 treatment was sufficient to induce delayed cytotoxicity after 4hr, however, longer treatment (＞24hr) enhanced its cytotoxicity due to the intracellular accumulation of the drug, which requires 24hr to reach maximum equilibrium concentration. In addition, $C^n$$\times$T=h analysis (n=0.481) indicated that increased exposure times may contribute more to the overall antitumor activity of CKD-602 than drug concentration. Additional studies to determine the details of the intracellular uptake kinetics (e.g., concentration dependency and retention studies) are needed in order to identify the optimal treatment schedules for the successful clinical development of CKD-602.

• Clean Technology
• /
• v.17 no.4
• /
• pp.346-352
• /
• 2011

The adsorption characteristics of propineb pesticide onto activated carbon has been investigated for the adsorption in aqueous solution with respect to initial concentration, contact time and temperature in batch experiment. The Langmuir and Freundlich adsorption models were applied to described the equilibrium isotherms and isotherm constants were also determined. The Freundlich model agrees with experimental data well. slope of isotherm line indicate that activated carbon could be employed as effective treatment for removal of propineb. The pseudo first order, pseudo second order kinetic models were use to describe the kinetic data and rate constants were evaluated. The adsorption process followed a pseudo second order model, and the adsorption rate constant($k_2$) decreased with increasing initial concentration of propineb. The activation energy, change of free energy, enthalpy, and entropy were also calculated to predict the nature adsorption. The estimated values for change of free energy were -7.28, -8.27 and -11.66 kJ/mol over activated carbon at 298, 308 and 318 K, respectively. The results indicated toward a spontaneous process. The positive value for change of enthalpy, 54.46 kJ/mol, found that the adsorption of propineb on activated carbon is an endothermic process.

• Clean Technology
• /
• v.26 no.2
• /
• pp.122-130
• /
• 2020

The isotherm, kinetic, and thermodynamic parameters of reactive blue 4 adsorbed by activated carbon were investigated for activated carbon dose, pH, initial concentration, contact time, and temperature data. The adsorption of the RB 4 dye by activated carbon showed a concave shape in which the percentage of adsorption increased in both directions starting from pH 7. The isothermal adsorption data were applied to Langmuir, Freundlich, and Temkin isotherms. Both Freundlich and Langmuir isothermal adsorption models fit well. From determined Freundlich separation factor (1/n = 0.125 ~ 0.232) and Langmuir separation factor (R_L = 1.53 ~ 1.59), adsorption of RB 4 by activated carbon could be employed as an effective treatment method. The constant related to the adsorption heat (B_T = 2.147 ~ 2.562 J mol^-1) of Temkin showed that this process was physical adsorption. From kinetic experiments, the adsorption process followed the pseudo second order model with good agreement. The results of the intraparticle diffusion model showed that the inclination of the first straight line representing the surface diffusion was smaller than that of the second straight line representing the intraparticle pore diffusion. Therefore, it was confirmed that intraparticle pore diffusion is the rate-controlling step. The negative Gibbs free energy change (ΔG = -3.262 ~ -7.581 kJ mol^-1) and the positive enthalpy change (ΔH = 61.08 kJ mol^-1) indicated the spontaneous and endothermic nature of the adsorption process, proving this process to be spontaneous and endothermic.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.

• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.73-79
• /
• 1973

The ultrasonic absorption of Dodecyl pyridinium bromide (D.P.B.) in aqueous solution has been measured at $20^{\circ}C$ over a range of frequencies between 0.1 mc and 90 mc and a range of concentrations from 5 to 100 mM. The excess absorption was observed only in the solutions the concentration of which was higher than the critical micellar concentration (c.m.c.) both in the presence and absence of salt. The excess absorption of sound and the relaxation frequencies obtained from the absorption curves show a discontinuity with the variation of the concentration of D.P.B. in the neighborhood of 60 mM. Other properties such as viscosity, conductivity and velocity of sound also exhibit such a change near the same concentration. It is concluded that a change in the properties of the micelles of D.P.B. occurs in the neighborhood of this concentration. The mechanism of the observed ultrasonic excess absorption in attributed to the reaction $M_2{\rightleftarrow}M_1+2Br^-$where$M_2$ and$M_1$are two types of micelles. The rate constants of forward and backward reactions are found to be $6.9 {\times} 10^5 sec^{-1)$and $6.7{\times}10^{10}sec^{-1}mole{-2}$ respectively. Some kinetic characteristics including free energy, enthalpy, entropy and activation energy were calculated.