• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.618-623
• /
• 2004

This paper has dealt with the heat storage characteristics of gel type micro size latent heat storage material slurry. The heat release operation to the gel type micro size latent heat storage material slurry was carried out using hot air bubbles by direct contact heat exchange. This experiment was carried out using phase change material of n-paraffin so the heat release amount is higher than cold water system. The parameters of this experiment were concentration of latent heat phase change material, height of heat release bath and inlet velocity of hot air. The main results obtained are as follows : (1) The effect of concentration of latent heat phase change material dispersed with water is very affective to the direct contact heat exchange between hot air and gel type micro size latent heat storage material slurry. (2) It is clarified that the most effective concentration of latent heat phase change material dispersed with water exists around 20mass% at this type of direct heat exchange model experiment.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.168-174
• /
• 2006

The purpose of this study is to develop the cold chain system by developing optimal phase change materials (PCM). There are some benefits from developing this system such as keeping freshness of agriculture products, saving energy, etc. The major results are as follows. To decide a latent heat material, the characteristics of water, sodium, polyacrylate, ethanol and N-tetradecane are analysed. Also, an insulating material is made by mixing water, nucleating agent and latent heat material, using cementing method. In addition, the sensitivity analysis for developed latent heat material($K_l,\;K_2,\;K_3$) is conducted. For $K_l,\;K_2,\;K_3$ which cans keep latent heat temperature, ranging from $0\;to\;5^{\circ}C,\;5\;to\;10^{\circ}C,\;10\;to\;15^{\circ}C$. it can keeps latent heat temperature at radiant heat (5, 12, $17^{\circ}C$) and transportation latent heat container both melting temperature and amount of latent heat of Kl are $-1.6{\pm}1.0^{\circ}C$, 326.51 J/g, respectively and freezing temperature and latent heat are $-7.98{\pm}1.5^{\circ}C$ and 174.18 J/g. and $K_2$ are $7.41{\pm}1.5^{\circ}C$, 89.80 J/g, respectively and freezing temperature and latent heat are $-2.14{\pm}1.5^{\circ}C$ and 83.90 J/g. and $K_3$ are $9.54{\pm}1.0^{\circ}C$, 145.42 J/g, respectively and freezing temperature and latent heat are $0.21{\pm}1.0^{\circ}C$ and 152.48 J/g.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.23-30
• /
• 1989

Heat transfer phenomena of solidification process of the phase change material within cylindrical can is studied experimentally. N-Eicosane paraffin wax is used for phase change material and its melting temperature is 309.8 K. In order to achieve higher heat transfer rate of latent heat storage apparatus, fins in made of copper are used in the cylindrical can. If there are fins in cylindrical can, we can know that the inward latent heat energy in paraffin can be effectively transfered to cooling water than if finless.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1385-1390
• /
• 2009

In this study the purpose is development of passive cooling system for telecommunication cabinet used by latent heat material. This cooling system is not required for electronic power. It was tested for the performance of the telecommunication combined latent heat material with $48^{\circ}C$ of phase changed temperature and heat pipe. At $45^{\circ}C$ of outside temperature, when heater power was 1,000 W and 1,500 W, the inside temperature of the cabinet was $55^{\circ}C$ and $62^{\circ}C$. This system was showed better performance than the other systems.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.193-198
• /
• 2005

The present experiments have been performed for obtaining the melting heat transfer characteristics of micro-encapsulated solid-liquid phase change material and water mixed slurry flow in a circular tube heated with constant wall heat flux. The phase change material having a low melting point was selected for a domestic cooling system in the present study. The governing parameters were found to be latent heat material concentration, heat flux, and the slurry velocity. The experimental results revealed that the increase of tube wall temperature of latent microcapsule slurry was lower than that of water caused by the heat absorption of fusion.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.218-226
• /
• 2011

본 연구에서는 스트론튬계 잠열재를 사용한 저발열 콘크리트를 레미콘 배처플랜트에서 시험생산한 후 생산된 콘크리트의 기초성능 및 모의부재에 의한 수화온도 특성을 평가하였으며, 그 결과 스트론튬계 잠열재를 사용한 저발열 콘크리트의 현장적용 가능성을 확인하였다. 이후 스트론튬계 잠열재를 사용한 콘크리트를 실제 교각 건설현장에 적용하였으며, 적용부재에 대한 수화열 해석 및 타설 콘크리트의 성능평가 결과 수화열 및 온도균열 저감효과가 우수한 것으로 나타나, 향후 대형 매스콘크리트의 수화열 및 온도균열 저감대책으로서 활용이 기대된다.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.103-107
• /
• 2009

It is necessary to develop a new technology for effectively controlling thermal crack caused hydration heat according to the increasing construction of large size massive concrete structures such as mat foundation of high-rise building. Therefore, to develop a new technology for reducing hydration heat of large size massive concrete in this study, it was investigated hydration heat generation properties of binder using latent heat materials. As a test result, it was confirmed that latent heat materials were advanced on the reduction of hydration heat and control of thermal crack. It is expected to be applied as the excellent technology on the management of hydration heat and thermal crack in large size massive concrete structures.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.134-147
• /
• 2001

Laser cladding process accompanies phase transformations from melting (on heating) through solidifying (on cooling) at the same time within a small material volume and to final solid phase. The phase transformations are not reversible, but an irreversible thermodynamic process; they accompany either absorption or release of thermal energy (referred to latent heat) during transformation. Yet, most analyses on materials processed by laser as a heat source have been performed on models of neglecting the latent heat in the process and those did not Justify the simplification. With literatures on the laser material process, we have not place an answer to how little the assumption affects on analyses. This led us to our current study: the effects of latent heat on thermo-mechanical analysis. To this end, we developed a fairly accurate program accommodating an algorithm for enforcing the latent heat whenever necessary and ran it combining with ABAQUS$^{TM}$. The simulation techniques we used in this study were verified by directly comparing our prediction with experimental publications elsewhere; our numerical results agreed accurately with the experiments. On the effects of the latent heat, we performed two alternatives about considering the latent heat in analysis, and compared each other. As a result, we found that more accurate conclusions might come out when considering the latent heat in process analyses.s.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.807-812
• /
• 2015

A microcapsule water slurry is a latent heat-storage material having a low melting point. In this study, the thermal properties of a microcapsule water slurry are measured. The physical properties of the test microcapsule water slurry, i.e., thermal conductivity, specific heat, latent heat, and density, are measured, and the results are discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). It is clarified that Eucken's equation can be applied to the estimation of the thermal conductivity of the microcapsule water slurry. Useful correlation equations of the thermal properties of the microcapsule water slurry are proposed in terms of the temperature and concentration ratio of the microcapsule water slurry constituents.

• Journal of Biosystems Engineering
• /
• 제25권5호
• /
• pp.379-384
• /
• 2000

In order to use the natural thermal energy as much as possible for greenhouse heating, the air-air heat pump system involved PCM(phase change material) latent heat storage system was composed, and three types of greenhouse heating system(greenhouse system, greenhouse-PCM latent heat storage system, greenhouse-PCM latent heat storage-heat pump system) were recomposed from the greenhouse heating units to analyze the heating characteristics. The results could be concluded as follows; 1) In the greenhouse heated by the heat pump under the solar radiation of 406.39W/$m^2$, the maximum PCM temperature in the latent heat storage system was 24$^{\circ}C$ and the accumulated thermal energy stored in PCM mass of 816kg during the daytime was 100,320kJ. In the greenhouse without heat pump under the maximum solar radiation of 452.83W/$m^2$, the maximum PCM temperature in the latent heat storage system was 22$^{\circ}C$ and the accumulated thermal energy stored during the daytime was 52.250kJ. 2) In the greenhouse-PCM system without heat pump the heat stored in soil layers from the surface to 30cm of the soil depth was 450㎉/$m^2$. 3) In all of the greenhouse heating systems, the difference between the air temperature in greenhouse and the ambient temperature was about 20~23$^{\circ}C$ in the daytime. In the greenhouse without heat pump and PCM latent heat storage system the difference between the ambient temperature and the air temperature in the greenhouse was about 6~7$^{\circ}C$ in the nighttime, in the greenhouse with only PCM latent heat storage system the temperature difference about 7~13$^{\circ}C$ in the nighttime and in the greenhouse with the heat pump and PCM latent heat storage system about 9~14$^{\circ}C$ in the nighttime.