• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2004

In recent, development of nano fiber has been one of the most active subjects in the world. Nano fiber is defined as a ultra fine yarn with a diameter unit of $10-100\times10^{-9}meter$, which is possible to be produced by an electro-spinning technology. In this study, physical characteristics and dyeing properties of nylon 66 nano fiber were investigated. Nylon 66 nano fiber was dyed with levelling type acid dyes. X-ray diffraction method and DSC analysis were used for the measurement of the degree of crystallization. Analysis of amino end groups was also performed in order to examine a relationship between number of amino groups and its dyeing property as well as water absorption behavior. The maximum exhaustion % of dyes and dyeing rate under various dyeing conditions, such as dyeing temperature and pH in dye bath, along with build-up properties for 2 acid dyes were evaluated. It was found that the degree of crystallization of nano fiber was smaller than that of regular fiber, and amino end groups of nano fiber were less than regular fiber. Half dyeing time of nano fiber was shorter than regular fiber because of the bigger specific surface area. Effect of pH on exhaustion % was small in case of nano fiber. Exhaustion of nano fiber increased with higher concentration of dye.

• Textile Coloration and Finishing
• /
• v.3 no.3
• /
• pp.34-43
• /
• 1991

The dyeing property of milling type acid dyes with various chemical constitution were studied in one bath dyeing of Wool/Nylon blended fabrics and the proper dyeing condition to get solid color by using reserving agent was also examined. The result of the experiments can be summarized as follows; 1) Although the effect of pH on dyeing of wool with a highly hydrophiilic dye is great in the dyeing of wool and nylon, the proper pH of dyeing bath is weakly acidic 5, in which levelling dye can be obtained by increasing the solubility product. 2) Under a constant pH, the dye with fewer numbers of sulfonic acid groups increases the dyeing amount of nylon as the concentration of the dye is increased. Thus the appropriate dye for light color is the one with many numbers of sulfonic acid groups and the proper dye for medium and deep color is of fewer sulfonic acid groups for one-bath dyeing. 3) When the dye concentration is greater than the critical depth, the K/S value of wool and nylon was almost not effected or slightly increased.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.

• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.27-33
• /
• 1994

Wool fabrics were treated with low temperature oxygen plasma and/or protease, and examined for their mechanical and dyeing properties. By plasma-treatment the strength of wool fabric increased and higher rate of weight loss for protease treatment was obtained. When dyed by levelling type acid dye equilibrium dye uptake appeared same, but rate of dyeing increased by the plasma treatment, while, with milling type acid dye, both of them increased greatly in the order of untreatedplasma/protease-treated. It was assumed from the above results that plasma affects the surface of fiber, and enzyme attacks mainly the inner part of fiber. This was confirmed again by scanning electron microscope.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2004

Because acid dyes and reactive dyes require acidic condition for adsorption and alkaline condition for fixation respectively, it is difficult to dye nylon/cotton blends in one-bath one-step dyeing method. In this paper we tried to find out the suitable dye and dyeing condition for one-bath one-step dyeing of nylon/cotton blends. MNT type reactive dyes showed higher exhaustion on cotton as compared with MCT type dyes at neutral pH, which means that the MNT type reactive dyes are preferable for one-bath one-step dyeing method. The optimum condition for one-bath one-step dyeing of nylon/cotton blends was found to be pH 7. Wash fastness of fabrics dyed with half-milling type acid dyes was superior to that of fabrics dyed with levelling type acid dyes, when MNT type reactive dyes were used together.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.87-95
• /
• 1997

Wool samples were treated by potassium tert-Butoxide(t-BuOK) in anhydrous tert-butanol to remove the bound surface lipid-layer, and the weight loss behaviors in protease solution and dyeabilities of the samples were studies. The C/N ratio of the surface of the t-BuOK-treated wool was shown to be 4.3 from XPS analysis. From SEM pictures any remarkable change in the shape of surface curticle during the proteasw treatment was not observed regardless of prior t-BuOK treatment. Dyeing rate and equilibrium adsorption of Orange II, a typical levelling type acid dye, on wool were not changed by protease or t-BuOK treatment, but those of Milling Cyanine 5R, a typical milling type acid dye, on wool were greatly enhanced by t-BuOK treatment in spite that, from alkali and urea-bisulfite solubilities, no damage on the inner part of wool fiber was expected by t-BuOK treatment.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.36-42
• /
• 1990

The effect of urea and its derivatives, which are known as structure breakers of water, in the dyeing of silk with acid dyes was investigated. Without ureas the maximum dye uptake was observed at $60^{\circ}C$ when dyed with Milling Cyanine 5R, but in the presence of ureas the maximum dye uptake was decreased and its temperature also shifted to lower regin in the order of urea >N-methyl urea > N,N-dimethyl urea>tetramethyl urea. These tendencies were more marked in the dyeing of silk fiber with Orange II, a typical levelling type acid dye. These can be interpreted as the decrease in the hydropholic interaction between fiber molecules which results in the broadening of the inter micelie spacing. The increased partition coefficient of dye molecules in the bath by the action of ureas also contributes to dyeing results, and it can be seen from the spectral characteristics of dyes in aqueous urea solution.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1994

A low-temperature dyeing system for silk fabrics based on a redox system has been investigated. Some factors affecting dyeing of silk fabrics with levelling acid dyes in the absence and presence of certain redox system were investigated under different conditions. The variables studied were; type and concentration of redox system, dyeing conditions, i. e. temperature and time, dye concentration, material-to-liquor ration(LR) and colour fastness. The colour strength(K/S value) is outstandingly higher in the presence than in the absence of redox system. A comparison between the colour strength values of such dyeings abtained the three redox system would call for the following order ; Glyoxal/hydrogen peroxide>thiourea/hydrogen peroxide>glucose/hydrgen peroxide> nothing. In the presence of redox system, free radicals are supposed to be formed in both the fiber and the dye and the interaction between these free radicals bring about covalent fixation beside the usual electrostatic bonds, hydrogen bonds and Van der Waals forces.