• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.175-189
• /
• 2012

This paper presents an algorithm for structural reliability with the response surface method. For this aim, an approach with three stages is proposed named as improved response surface method. In the algorithm, firstly, a quadratic approximate function is formed and design point is determined with First Order Reliability Method. Secondly, a point close to the exact limit state function is searched using the design point. Lastly, vector projected method is used to generate the sample points and Second Order Reliability Method is performed to obtain reliability index and probability of failure. Five numerical examples are selected to illustrate the proposed algorithm. The limit state functions of three examples (cantilever beam, highly nonlinear limit state function and dynamic response of an oscillator) are defined explicitly and the others (frame and truss structures) are defined implicitly. ANSYS finite element program is utilized to obtain the response of the structures which are needed in the reliability analysis of implicit limit state functions. The results (reliability index, probability of failure and limit state function evaluations) obtained from the improved response surface are compared with those of Monte Carlo Simulation, First Order Reliability Method, Second Order Reliability Method and Classical Response Surface Method. According to the results, proposed algorithm gives better results for both reliability index and limit state function evaluations.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.365-372
• /
• 2017

Reliability analysis is a probabilistic approach to determine a safety level of a system. Reliability is defined as a probability of a system (or a structure, in structural engineering) to functionally perform under given conditions. In the 1960s, Basler defined the reliability index as a measure to elucidate the safety level of the system, which until today is a commonly used parameter. However, the reliability index has been formulated based on the pivotal assumption which assumed that the considered limit state function is normally distributed. Nevertheless, it is not guaranteed that the limit state function of systems follow as normal distributions; therefore, there is a need to define a new reliability index for no-normal distributions. The main contribution of this paper is to define a sophisticated reliability index for limit state functions which their distributions are non-normal. To do so, the new definition of reliability index is introduced for non-normal limit state functions according to the probability functions which are calculated based on the convolution theory. Eventually, as the state of the art, this paper introduces a simplified method to calculate the reliability index for non-normal distributions. The simplified method is developed to generate non-normal limit state in terms of normal distributions using series of Gaussian functions.

• Structural Engineering and Mechanics
• /
• 제38권5호
• /
• pp.651-674
• /
• 2011

This paper presents a novel method for predicting the failure probability of structural or mechanical systems subjected to random loads and material properties involving multiple design points. The method involves Multicut High Dimensional Model Representation (Multicut-HDMR) technique in conjunction with moving least squares to approximate the original implicit limit state/performance function with an explicit function. Depending on the order chosen sometimes truncated Cut-HDMR expansion is unable to approximate the original implicit limit state/performance function when multiple design points exist on the limit state/performance function or when the problem domain is large. Multicut-HDMR addresses this problem by using multiple reference points to improve accuracy of the approximate limit state/performance function. Numerical examples show the accuracy and efficiency of the proposed approach in estimating the failure probability.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.45-58
• /
• 2013

In structural reliability analysis, the response surface method is a powerful method to evaluate the probability of failure. However, the location of experimental points used to form a response surface function must be selected in a judicious way. It is necessary for the highly nonlinear limit state functions to consider the design point and the nonlinear trend of the limit state, because both of them influence the probability of failure. In this paper, in order to approximate the actual limit state more accurately, experimental points are selected close to the design point and the actual limit state, and consider the nonlinear trend of the limit state. Linear, quadratic and cubic polynomials without mixed terms are utilized to approximate the actual limit state. The direct Monte Carlo simulation on the approximated limit state is carried out to determine the probability of failure. Four examples are given to demonstrate the efficiency and the accuracy of the proposed method for both numerical and implicit limit states.

• 한국전산구조공학회논문집
• /
• 제26권3호
• /
• pp.183-189
• /
• 2013

본 논문에서는 불확실성을 확률변수로 가정하고 구조물의 파손기준을 한계상태식(Limit State Equation)으로 정의하였다. 한계상태식을 Fleishman의 3차 다항식으로 근사하고 이론적인 확률 모멘트(Moments)를 계산하였다. Fleishman은 표준정규 분포 확률변수에 대해서만 3차 다항식을 제시하였으나, 본 논문에서는 이를 확장하여 베타, 감마, 균일 분포 등 다양한 확률 변수에 적용하였다. 확률 모멘트를 계산하기 위해서 누률(Cumulants)과 정규화된 한계상태식을 활용하였으며, 피어슨 시스템(Pearson System)을 통해 한계상태식의 확률분포를 근사하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.672-676
• /
• 2002

In this paper, a reliability-based design optimization method, which enables the determination of optimum design that incorporate confidence range for structures, is studied. Response surface method and Monte Carlo simulation are utilized to determine limit state function. The proposed method is applied to the I-type steel structure for reliability based optimal design.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.697-705
• /
• 2011

In this paper, a closed-loop system constructed with a linear plant and nonlinearity in the feedback connection is considered to argue against its planar orbital stability. Through a state space approach, a main result that presents a sufficient stability criterion of the limit cycle predicted by solving the harmonic balance equation is given. Preliminarily, the harmonic balance of the nonlinear feedback loop is assumed to have a solution that determines the characteristics of the limit cycle. Using a state-space approach, the nonlinear loop equation is reformulated into a linear perturbed model through the introduction of a residual operator. By considering a series of transformations, such as a modified eigenstructure decomposition, periodic averaging, change of variables, and coordinate transformation, the stability of the limit cycle can be simply tested via a scalar function and matrix. Finally, the stability criterion is addressed by constructing a composite Lyapunov function of the transformed system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권1호
• /
• pp.171-180
• /
• 2007

처짐, 응력 및 휨강도 한계상태에 대한 PSSC(prestressed steel and concrete)거더의 신뢰도해석을 수행한다. PSSC 거더는 시공비용과 형하공간의 확보 면에서 지간 40m이상인 교량에 적용하는데 커다란 장점을 가지고 있는 형식이다. 이 논문에서는 다양한 지간, 단면 및 설계 응력수준을 가지는 PSSC 거더를 설계하여 중앙점 처짐, 응력 및 단면 휨모멘트 해석을 수행하고, 각각에 대한 한계상태를 가정한 후, Monte-Carlo 시뮬레이션과 Rackwitz-Fiessler 방법을 이용하여 신뢰도지수를 구한다. 결과를 분석하면 PSSC 거더에 대한 처짐한계상태는 응력한계상태보다 적절하게 큰 신뢰도지수 값을 보이며, 휨강도에 대한 신뢰도지수가 매우 큼을 알 수 있다.

• Wind and Structures
• /
• 제27권3호
• /
• pp.149-161
• /
• 2018

A reliability analysis method is proposed in this paper based on the maximum entropy (MaxEnt) principle in which constraints are specified in terms of the fractional moments instead of integer moments. Then a multiplicative dimensional reduction method (M-DRM) is introduced to compute the fractional moments. The method is applicable for both explicit and implicit limit state functions of complex structures. After two examples illustrate the accuracy and efficiency of this method in comparison to the Monte Carlo simulation (MCS), the method is used to analyze the flutter reliability of suspension bridge. The results show that the empirical formula method in which the limit state function is explicitly represented as a function of variables is only a too conservative estimate for flutter reliability analysis but is not accurate adequately. So it is not suitable for reliability analysis of bridge flutter. The actual flutter reliability analysis should be conducted based on a finite element method in which limit state function is implicitly represented as a function of variables. The proposed M-DRM provide an alternate and efficient way to analyze a much more complicated flutter reliability of long span suspension bridge.

• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.497-505
• /
• 2003

Under normality assumption, the tolerance interval for a future observation is sometimes of great interest in statistics. In this paper, we state the influence function on the standard deviation $\sigma$, and use it to derive the influence function on tolerance limits. Simulation study shows that the two influence functions perform very well.