• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.315-322
• /
• 2014

Immobilized lipases were prepared by physical adsorption using lipase AK, AY, AH, PS and R on Amberlite$^{(R)}$XAD$^{(R)}$7 HP resin. With the immobilized lipases (10%), structured lipid was synthesized by enzymatic interesterification of canola oil, palmitic ethyl ester, and stearic ethyl ester in order to study the reaction characteristics. Among the lipase, the highest protein content was obtained from lipase AH (11.41%) before immobilization, while the highest levels of bound protein was observed from immobilized lipase AK (63.91%). Immobilized lipase AK had the highest interesterification activity (38.3% of total saturated fatty acid). Lipase AK was also used for a continuous reaction in which the slow flow of reactant resulted in increased reaction rate. Reusability of immobilized AK, AH and PS increased at the second reaction (120-196.5%). However, the activity of immobilized AK, which had the highest bound protein content (63.91%) decreased after the third reaction, while the activity of immobilized AH and PS was maintained until the sixth reaction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1025-1035
• /
• 2014

This study assessed the effect of immobilized lipase on weak base styrene resin using polyethyleneimine (PEI) with cross-linking. Two procedures were used in this study. The first one, "mono-layer" lipase immobilization, involves washing PEI after adsorption. The second procedure, "multi-layer" lipase immobilization, has no washing before the cross-linking step. Treverlite XS-100200 (weak base styrene resin) was immersed with PEI solution (2.2 mg/mL). Lipase AH (from Burkholderia cepacia) was adsorbed onto the support coated with PEI before cross-linking with glutaraldehyde. Structured lipid was synthesized by immobilized lipase-catalyzed interesterification using canola oil, palmitic ethyl ester (PEE), and stearic ethyl ester (StEE). Total fatty acid contents of triacylglycerol (TAG) in structured lipids were analyzed to investigate activity, properties, and reusability of immobilized lipases. Activities of immobilized lipases on the multi-layer and mono-layer increased at a high concentration (8 mg/mL) of lipase solution used for immobilization. The results show that immobilized lipase with the mono-layer method at pH 8.0 on resin had the highest total saturated fatty acid content (26.17 area%). Activity of immobilized lipase with the multi-layer method at pH 7.5 on support was lower than that of the mono-layer, but total saturated fatty acid content was 16.79 area% higher than that of lipase AH (15.01 area%).

• Korean Journal of Agricultural Science
• /
• v.40 no.3
• /
• pp.227-235
• /
• 2013

This study was conducted to prove the effect of irradiation on lipases (lipase AK, lipase AH, lipase PS-D, Lipozyme TLIM, Lipozyme RMIM and Novozyme SP435) which were used for interesterification reaction using batch type reactor. Through such interesterification, structured lipid (1(3)-palmitoyl-2-oleoyl-3(1)-stearoyl, POS) was synthesized by lipase treated with irradiation at different doses (0, 3, 7, 14, 29 and 59 kGy) using canola oil, palmitic ethyl ester (PEE) and stearic ethyl ester (StEE). After the reaction, fatty acid composition of triacylglycerol (TAG) in structured lipid was analyzed to compare the lipase activity. The results showed that activity of the irradiated lipase AH, PS-D and Novozyme SP435 with certain dose (3 kGy) were slightly improved. Such change of lipase activity suggested that irradiation might affect on the interesterification properties. Especially, Lipase AK, Lipozyme TLIM and Lipozyme RMIM after at 3 kGy irradiation showed that content of stearic acid ($C_{18:0}$) was increased while palmitic acid ($C_{16:0}$) decreased in the interesterified products.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.164.2-165
• /
• 2003

Structured lipids (SLs) are defined as triacylglycerols to change the fatty acid composition in the glycerol backbone and lipases are known as a powerful tool for the syntheses of SLs. Structured lipid from corn oil, capric acid, and conjugated linoleic acid (CLA) by transesterification reaction and using several amounts of immobilized lipase RM IM (from Rhizomucor miehei) was studied, and 4% of lipase amount was selected for further study as the optimal amount. Comparison the chemical properties (free fatty acid value, iodine value, saponification value, tocopherols, and color analysis), solidification behavior, and volatile fractions (from headspace SPME GC-MS) between com oil and SL com oil was obtained.

• BMB Reports
• /
• v.36 no.5
• /
• pp.433-441
• /
• 2003

A cDNA clone for a salicylic acid-induced gene in Chinese cabbage (Brassica rapa subsp. pekinensis) was isolated and characterized. The cabbage gene, designated Br-sil1 (for $\underline{B}$rassica $\underline{r}$apa $\underline{s}$alicylate-$\underline{i}$nduced $\underline{l}$lipase-like 1 gene), encodes a putative lipase that has the family II lipase motif GDSxxDxG around the active site serine. A database search showed that plant genomes have a large number of genes that contain the family II lipase motif. The lipase-like proteins include a myrosinase-associated protein, an anther-specific proline-rich protein APG, a pollen coat protein EXL, and an early nodule-specific protein. The Br-sil1 gene is strongly induced by salicylic acid and a non-host pathogen, Pseudomonas syringae pv. tomato, that elicits a hypersensitive response in Chinese cabbage. Treatment of the cabbage leaves with BTH, methyl jasmonate, or ethephon showed that the Br-sil1 gene expression is induced by BTH, but not by methyl jasmonate or ethylene. This indicates that the cabbage gene is activated via a salicylic acid-dependent signaling pathway. An examination of the tissue-specific expression revealed that the induction of the Br-sil1 gene expression by BTH occurs in leaves and stems, but not in roots and flowers. Without the BTH treatment, however, the Br-sil1 gene is not expressed in any of the tissues that were examined.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.238-244
• /
• 2011

Biodiesel, mono-alkyl esters of long chain fatty acids, is one of the alternative fuels derived from renewable lipid feedstock, such as vegetable oils or animal fats. For decade, various lipases have been used for the production of biodiesel. However, the production of biodiesel by enzymatic catalyst has profound restriction in industry application due to high cost. To overcome these problems, many research groups have studied extensively on the selection of cheap oil sources, the screening of suitable lipases, and development of lipase immobilization methods. In this study, we produced biodiesel from plant oil using Proteus vulgaris lipase K80 expressed in Escherichia coli cells. The recombinant lipase K80 was not only expressed in high level but also had high specific lipase activity and high stability in various organic solvents. Lipase K80 could produce biodiesel from olive oil by 3-stepwise methanol feeding method. The immobilized lipase K80 also produced biodiesel using the same 3-stepwise method. The immobilized lipase could produce biodiesel efficiently from various plant oils and waste oils.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.219-224
• /
• 2009

Two functional modified-butterfats (MF668 and MF866) were synthesized with two blends (6:6:8 and 8:6:6, w/w%) of anhydrous butterfat (ABF), palm stearin (PS) and flaxseed oil (FSO, omega-3) via lipase-catalyzed interesterification reaction. Their flavor characteristic was investigated using electronic nose and SPME-GC/MS analysis. Each flavor pattern of ABF, FSO, MF668 and MF866 was significantly discriminated with first principal component score of 95.16% in PCA plot. In functional modified-butterfats analyzed with SPME-GC/MS, various volatile compounds such as aldehydes, ketones, acids, and alkanes were detected.

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.242-249
• /
• 2013

Thermal processing of (+)-catechin was carried out at $121^{\circ}C$ for different reaction times (1, 2, 3, 6, and 12 h). The reacted products, compounds (1) and (2), were isolated and quantified via HPLC analysis. The antioxidant properties of processed (+)-catechin and its isolated compounds for different reaction time was measured via radical scavenging assays using DPPH and $ABTS^+$ radicals. Additionally, the anti-obesity efficacy of the thermal treated (+)-catechin was evaluated via porcine pancreatic lipase assay. The reacted (+)-catechin for 3 h had a slightly higher antioxidant capacity than that the parent (+)-catechin. Products 1 and 2, which were isolated from the reacted mixture during 3 h, showed an antioxidant capacity, and these two compounds may be responsible for the antioxidant capacity of processed (+)-catechin. Simple thermal treatment of (+)-catechin can be used to produce (+)-epicatechin (1) and protocatechuic acid (2) with enhanced antioxidant and anti-adipogenic effects.

• Molecules and Cells
• /
• v.40 no.12
• /
• pp.935-944
• /
• 2017

More than 50% of sepsis cases are associated with pneumonia. Sepsis is caused by infiltration of bacteria into the blood via inflammation, which is triggered by the release of cell wall components following lysis. However, the regulatory mechanism of lysis during infection is not well defined. Mice were infected with Streptococcus pneumoniae D39 wild-type (WT) and lipase mutant (${\Delta}lipA$) intranasally (pneumonia model) or intraperitoneally (sepsis model), and survival rate and pneumococcal colonization were determined. LipA and autolysin (LytA) levels were determined by qPCR and western blotting. S. pneumoniae Spd_1447 in the D39 (type 2) strain was identified as a lipase (LipA). In the sepsis model, but not in the pneumonia model, mice infected with the ${\Delta}lipA$ displayed higher mortality rates than did the D39 WT-infected mice. Treatment of pneumococci with serum induced LipA expression at both the mRNA and protein levels. In the presence of serum, the ${\Delta}lipA$ displayed faster lysis rates and higher LytA expression than the WT, both in vitro and in vivo. These results indicate that a pneumococcal lipase (LipA) represses autolysis via inhibition of LytA in a sepsis model.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.164.1-164
• /
• 2003

In this study, medium-chain fatty acid (MCFA) metabolized in the liver for quick energy and CLA exhibited biological activity were used for synthesis of structured lipids (SLs). SLs were synthesized by acidolysis of soybean oil, capric acid (C10:0) and CLA with Chirazyme L-2 lipase as biocatalysts. The effect of enzyme load (2, 4, 6, 8, 10% w/w substrates) was investigated. Production of SL (scale-up) was performed with a 1:2:2 molar ratio (oi1/C10:0/CLA) for 24 h at 55$^{\circ}C$ in a stirred batch reactor (420 rpm). The reaction was catalyzed by Chirazyme L-2 lipase (24.48g, 4％ w/w substrates). The scale-up result showed that capric acid and total CLA were incorporated 4.9%, 4.1% (mole%), respectively, in soybean oil. Then, physio-chemical property and flavor characteristic of produced SL-soybean oil were analyzed. Therefore, SL-soybean oil containing C10:0 and CLA was successfully synthesized and may be beneficial in desirable food and nutritional applications.