• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.652-659
• /
• 2000

The machine structure or parts has been arrive at a fracture, depend on crack by repeated load. Machine designer is estimate of fatigue strength in early stages the design for prevent fatigue fracture, then necessary its load history. This research study is using diesel locomotive in measurement of load history for fatigue design of rolling stock. The relation between velocity and amplitude of load history was found. We confirmed that the increase of velocity make to increase the magnitude of amplitude.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.251-257
• /
• 2017

Purpose: A chisel mounted on working implement, such as agricultural machinery used in irregular farming conditions, is subjected to highly variable fatigue loading during work. To ensure the safety of the chisel on a working implement for the duration of its service life, fatigue testing must be performed with the proper fatigue test load conditions. In this study, working loads for a chisel were developed by reconstructing loads from strain gage data collected during field tests and used to conduct fatigue tests on the chisel component. Methods: FE analysis with nCode software was utilized to select the proper quantity and locations of strain gages for load measurements. A fatigue test was performed to experimentally verify the fatigue strength of the chisel and to evaluate the validity of the load history developed with the load reconstruction technique. Results: A strain history for the chisel was obtained from data collected during field tests. The data was filtered for the 14-16 km/h speed range, connected, and merged. The chisel load history was developed using the load reconstruction technique. The resulting load history was expressed as a load spectrum using the rain-flow counting method. Conclusions: A fatigue test was conducted on a chisel under a constant load condition with an equivalent load amplitude and number of cycles, as calculated by Miner's Rule for linear damage accumulation. During the fatigue test, there were no cracks at any position. It is concluded that the fatigue test method proposed in this study can be utilized successfully as a durability evaluation method for the chisel.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.133-141
• /
• 2012

This study investigates structural and fatigue analyses of bike brake. Maximum equivalent stress of the model of mountain bike is 4 times as much as the model of general bike at static analysis. In cases of mountain and general bikes, maximum damage frequency at load of 'SAE bracket history' with the severest change of load becomes as much as 16 times than the most stable load of 'Sample history' among the nonuniform fatigue loads. In case of mountain bike, the possibility of maximum damage becomes 3% at the load of 'Sample history' with the average stress of 0 to $-3{\times}10^4$MPa and the amplitude stress of 0 to $10^4$MPa. In case of general bike, the possibility of maximum damage becomes 3% at the load of 'Sample history' with the average stress of 0 to $-0.8{\times}10^4$MPa and the amplitude stress of 0 to $0.2{\times}10^4$MPa. This stress state can be shown as 5 to 6 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The analysis result of this study can be effectively utilized for the safe design of bike brake.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.169-176
• /
• 2000

In the strengthening of the existed reinforced concrete(RC) structures, it is required that the more rational strengthening method and the amounts of strengthening materials would be decided under the consideration of the present state of RC structures. Therefore, this study examined the strengthening effects of concrete cylinders strengthened with carbon fiber sheet(CFS). In this studying we modeled the reduction of internal forces and the initial strains of concrete cylinders as the load history over the elastic limit. From the results, it revealed that the strengthening of two layer CFS was more effective on the concrete cylinders under the action of load history such as cyclic and cracking load.

• Computers and Concrete
• /
• 제11권5호
• /
• pp.463-473
• /
• 2013

As known, concrete classes are described as strength of standard specimens produced and kept in ideal conditions, not including reinforcement and not subjected to any load effect before. Under the circumstances, transforming core strengths to the standard specimen strength is necessary and considering all parameters, affected on the core strength, is inevitable. In fact, effects of the reinforcement and the load history on concrete strength are generally neglected when these mentioned transforms are performing. The main purpose of this paper is investigating the effects of the reinforcement and the load history on the core strength. This investigation is experimentally performed on cores drilled from specimens having different keeping conditions, reinforced, unreinforced, subjected to bending and central pressure in various proportions of failure load during specified periods. Obtained results show that the importance of these effects cannot be neglected.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.87-92
• /
• 2011

This study analyzes structural stress and fatigue on control arm of automobile under nonuniform load. Maximum equivalent stress at bolt part is shown with 419.1MPa and the corner is deformed with maximum displacement of 1.1628mm. Among 3 cases of nonuniform fatigue loads applying on control arm, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of $-10^5MPa$ to $10^5MPa$ and the amplitude stress of 0 MPa to $10^5MPa$, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. Safety and durability on automobile can be effectively improved by applying the fatigue analysis result on control arm.

• 한국전산구조공학회논문집
• /
• 제29권1호
• /
• pp.67-75
• /
• 2016

본 논문에서는 폭발해석에서 주로 사용되는 폭발하중의 압력-시간 이력곡선과 폭발하중 산정식인 Conwep 모델을 소개하고, 이를 더욱 간편하게 계산할 수 있는 간략 폭발하중 산정식을 제안한다. 폭발해석에서 폭발하중은 일반적으로 압력-시간 이력곡선의 형태로 적용되며, 그에 대한 주요 값들은 폭발하중 산정식에 의해 계산된다. 대부분의 폭발해석에서 사용되는 폭발하중 산정식인 Conwep 모델은 환산거리(scaled distance)를 핵심변수로 하여 계산되는데, 그 계산 과정이 매우 복잡한 단점이 있다. 따라서 본 논문에서는 환산거리를 변수로 갖는 간략한 유리식을 사용하여 주요 값들을 계산하고, 단순화된 압력-시간 이력곡선으로 폭발하중을 산정할 수 있도록 제안하였다. 간략식을 찾는 과정에서 Conwep 모델의 계산 결과를 바탕으로 곡선 적합(curve fitting) 방식이 사용되었으며, 제안된 간략식에 의한 주요 값의 계산 결과는 Conwep 모델과 비교하여 1% 미만의 오차를 갖는다. 또한, 유한요소를 이용한 폭발해석에 적용하였으며 Conwep 모델을 적용한 결과와 비교를 통해 검증하였다.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.845-852
• /
• 2015

본 연구에서는 합리적인 보강설계를 위하여 기존 철근콘크리트 보에 탄소섬유시트 보강시 하중이력에 따른 휨보강 효과를 분석하였다. 실구조물에서는 다양한 하중이력을 겪은 철근콘크리트보에 보강을 하게 되나 보강시기에 따른 구조물과 보강재료의 초기상태가 고려되지 않으므로 구조물의 안전적 측면과 경제적 측면으로 문제점을 발생시킬 수 있는 요인이 된다. 다양한 하중이력을 거친 RC 보의 변형률 상태를 고려하여 탄소섬유시트 보강에 따른 거동변화를 분석하였다. 휨보강후 거동에 영향을 미치는 변수들에 대하여 보강대상 부재의 하중이력의 영향을 고려한 비선형 단면해석결과 탄소섬유 휨보강보의 보강 후 구조적 성능은 하중이력에 따라 달라지는 것으로 나타났다. 탄소섬유 휨보강보의 휨강도는 하중이력에 크게 영향을 받으므로 설계시 반드시 고려하여야 한다.

• 한국정보처리학회논문지
• /
• 제7권3호
• /
• pp.776-787
• /
• 2000

Write requests which stored in disk cache of the RAID5 controller should be destaged to disk arrays according to the destage algorithm. As the response performance of the parallel IO request is being hit by the effect of the destage, several destage algorithms have been studied to enhance the performance of he RAID5 controller. Among the destage algorithms, the load balancing destage algorithm has better performance than other destage algorithms when system load is highly increased. But the load balancing destage algorithm gives priority to load balance among the disks in disk arrays, therefore, when some disks are affected by the very heavy system load caused by small data requests, the load balancing destage algorithm cannot enhance the performance of parallel IO requests effectively since it makes effort to maintain the load balance without the benefit of the locality of the write requests. This paper proposes a new RAID5 controller that applied reference-load balancing destage algorithm which decides the destage priority based on the reference history and load distribution of the disks. The simulation results show that RAID5 controller with the reference-load balancing destage algorithm has better performance than previous load balancing destage algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.79-84
• /
• 2000

Crack closure and growth behavior of physically short fatigue cracks under random loading are Investigated by performing narrow- and wide-band random loading tests for various stress ratios. Artificially prepared two-dimensional, short through-thickness cracks are used. The closure behavior of short cracks under random loading is discussed, comparing with that of short cracks under constant-amplitude loading and also that of long cracks under random loading. Irrespective of random loading spectrum or block length, the crack opening load of short cracks is much lower under random loading than under constant-amplitude loading corresponding to the largest load cycle in a random load history, contrary to the behavior of long cracks that the crack opening load under random loading is nearly the same as or slightly higher than constant-amplitude results. This result indicates that the largest load cycle in a random load history has an effect to enhance crack opening of short cracks.