• Title/Summary/Keyword: low tension

Search Result 677, Processing Time 0.036 seconds

Mechanical Properties of Carbon Fiber/Si/SiC and Carbon Fiber/C/SiC Composites (탄소섬유/Si/SiC 및 탄소섬유/탄소/SiC 복합재의 기계적 물성)

  • 신동우;박삼식;김경도;오세민
    • Composites Research
    • /
    • v.12 no.3
    • /
    • pp.8-16
    • /
    • 1999
  • Carbon woven fabric/C/SiC composites were fabricated by multiple impregnations of carbon woven fabric/carbon preform with the polymer precursor of SiC, i.e., polycarbosilane. In addition, two kinds of low density carbon/carbon preforms which had different fiber volume fraction and fiber orientation, i.e., a carbon woven fabric(${\thickapprox}$55 vol%)/carbon and a chopped carbon fiber${\thickapprox}$40 vol%)/carbon composites, were reaction-bonded with a silicon melt at 1$700^{\circ}C$ in a vacuum to fabricate dense carbon fiber/Si/SiC composites. The reaction-bonding process increased the density to ~2.1 g/$cm^3$ from 1.6 g/$cm^3$ and 1.15 g/$cm^3$ of a carbon woven and a chopped carbon preforms, respectively. All of the composites fractured with extensive fiber pull-out. The higher the density the higher the stiffness and proportional limit stress. The mechanical properties obtained from a three-point bend and tension tests were compared. The ratios of the peak tensile stresses to the bending strengths of a carbon woven and a chopped carbon composites were about one-third, respectively. The carbon woven fabric/Si/SiC composites with density of 2.06 g/$cm^3$ showed ~120 MPa of ultimate strength and ~80 MPa of proportional limit in bend testing.

  • PDF

Aesthetic Rhinoplasty for the Improvement of the Lateral Facial Profile; Image-up Rhinoplasty (얼굴의 측면 윤곽선 개선을 위한 미용 코성형술)

  • Min Sung
    • Archives of Plastic Surgery
    • /
    • v.32 no.2
    • /
    • pp.205-213
    • /
    • 2005
  • There are several characteristics of the nose of orientals. The dorsum of nose is flat and low, the skin is thick with severe tension, the nasal tip is bulbous, the nostril is wide, and the projection of the nose is limited due to a poorly developed alar cartilage with a short columella. In order to improve these untoward characteristics of the nose of Orientals aesthetically, plain augmentation of the dorsum and tip-plasty with conventional methods has been performed by many plastic surgeons. However these conventional rhinoplasty is not enough to obtain satisfactory results when transforming into a more beautiful and aesthetically charming appearance. In order to produce the optimal nasal shape and profile, it is extremely important to consider the aesthetic surgical factors, which are; the position of the nasion, the optimal nasolabial angle(95-100 degree in Orientals), the natural exposure of infra-tip lobule with and columella, the position of the tip defining point in harmony with the dorsal profile and the smooth and natural silhouette of the lateral nasal profile as it descends into the inferior portion of the nose. From April, 2003 to August, 2004, a total of 52 patients underwent open rhinoplasty, adhering to the strict aesthetic principles considered and described priorly. Surgical approach was done through a transcolumella incision and an alar rim incision. The nasal dorsum was augmented with a silicone implant and the shape of the columella and the nasolabial angle were finessed with a silicone strut implant which was placed in between the medial crurae in a manner of a non-visible graft. The nasal tip was corrected by alar cartilage suture technique and onlay graft of shield shaped Alloderm and Gore-Tex. Author obtained the optimal nasal shape and profile aesthetically, and the results, considered satisfactory in all patients without any complications, are as follows; 1. the average increase in nasal length was 2.5 mm, 2. the average decrease in nasal width was 2.1 mm, 3. the average increase in nasal tip projection was 3.2 mm, 4. the changes of nasolabial angles were from 85.5 degree to 94.7 degree, 5. the changes of the angle between the long axis of the external naris was from 101.3 degree to 89.5 degree. In conclusion, this surgical procedure is an effective, reliable and a valuable method in improving the nasal shape, tip projection, nasolabial angle and especially, the lateral facial profile of Orientals aesthetically.

A Preliminary Design of Mooring System for Floating Wave Energy Converter (부유식 파력발전장치용 계류시스템의 초기설계)

  • Jung, D.H.;Shin, S.H.;Kim, H.J.;Lee, H.S.
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.14 no.3
    • /
    • pp.184-191
    • /
    • 2011
  • Preliminary design of a mooring system for a floating wave energy converter(WEC) is performed. A mooring line is designed to consist of two parts; the one is a chain in heavy weight laid on the seabed and linked to an anchor on the seabed and the other is a light weight chain suspended at a floater. A high weight chain laid on the seabed can contribute to mitigate dynamic energy propagated from top oscillation and decrease anchor weight and volume. Through a low weight chain suspended between a floater and seabed the WEC's function to produce energy from wave can be affected in minimum by the motion of a chain. The static and dynamic analyses for the designed mooring system were carried out to evaluate WEC system's safety. The present study shows that the designed gravity anchor moves horizontally due to the tension exerted on the anchor in the severe ocean environmental condition. The present mooring system should be redesigned to satisfy the safety requirements. The present study will be useful to predict the safety of the mooring system under ocean environment.

Relationship between MMPI-2 Clinical Scales and SRQ of Brain Quotient (다면적 인성검사(MMPI-2)임상척도와 자기조절지수와의 관련성)

  • Wi, Hyun-Wook;Lee, Hyeob-Eui;Jung, Chul-Woo;Choi, Nam-Sook;Park, Pyong-Woon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.8
    • /
    • pp.285-293
    • /
    • 2017
  • The purpose of this study is to examine the relationship between the Minnesota Multiphasic Personality Inventory(MMPI-2) clinical scales and the self-regulation quotient of the brain quotient. The test in this study was performed by 41 adults over 20 years old and was done using the MMPI-2, which is a self-reporting method. EEG was performed using a 2-channel EEG System at Fp1 and Fp2. The analysis showed a negative correlation between scale 2(D), which is the MMPI-2 clinical scale, and the SRQ(Self Regulation Quotient) relaxation status, which is the related alpha rhythm. Scale3(Hy) showed a positive correlation with the SRQ concentration status and low ${\beta}$ rhythm. Scale7 in the MMPI-2 clinical scales showed a negative correlation with the SRQ relaxation status, which is the alpha rhythm. This means that MMPI-2 and SRQ can be used complementarily in the field of counseling. These results could be interpreted in three ways. First, people with depression are sensitive to other people's attention and evaluation. Therefore, they tend to expend a lot of energy when forming interpersonal relationships, and if they do not learn to relax, their fatigue can easily be increased. Second, people who seek other people's interest and have a cheerful spirit are considered to be highly active. Third, highly stressed people with anxiety and tension seem to easily become tired and their irritation and discomfort may be increased in consequence.

A Study on The Clinical Characteristics and Treatment in Burning Mouth Syndrome (구강 작엽감 증후군 (BMS)의 임상적 특징 및 치료에 관한 연구)

  • Mi-Jung Yeom;Chong-Youl Kim
    • Journal of Oral Medicine and Pain
    • /
    • v.20 no.1
    • /
    • pp.39-52
    • /
    • 1995
  • Burning mouth syndrome is characterized by a burning sensation in oral cavity without clinical signs. There has b een no established theories about the diagnosis and treatment. The purpose of this article is to examine the clinical feature of BMS patients of Korean and to present a treatment protocol that can be helpful in clinical applications. The subjects chosen for the study were 52 patients who had visited Department of Oral Diagnosis at Yonsei University Dental Hospital and were diagnosed as BMS. We did questionnaires and precise oral exam, laboratory exam, grouping of our patients, individual treatment for the groups and classification of responses to the treatment. The following results were obtained: 1. Chief complaints were throbbing (71.2%), pricking, stinging, tingling (30.8%), burning(25a%). The tongue is the most frequently affected site (82.7%), followed by full mouth, gingiva, palate, buccal mucosa, lips, throat, labial mucosa and floor of mouth. 2. The average age of onset was 48.1 year and the male to female ratio was 1 to 3. The average duration of symptom was 11.69 months for male and 23.07 months for female. 3. 32.7% of patients had appealed continuous pain, which was the most cases. Aggravating factors were peppery food, salty food, hot food, fatigue, tension conversation, sour food, cold food and toothpaste. Reducing factors were cold food, diet, going to sleep and smoking. 4. Associated symptoms were dry mouth, other life problem, altered taste perception, bad taste, throat pain, tingle and difficulty in swallowing. 5. Most of patients had appealed that there was not associated event on onset of symptom, and the order of prevalence is as fallow; dental treatment, stress, denture wearing, an attack of a systemic disease. 92.3% of patient appealed that there was no psychological withering and 7.7% of patients appealed positively. 6. There were eight males and four females that had jobs. 7. There was no family history in 100% of patients in questions about presence of family history. 8. 96.2% of patients appealed that there was no oral habits. 13.5% of patients had dryness of oral mucosa in oral exam. A significant relation to dental prosthesis was not observable, but incidence of diseases due to stress appeared high in BMS which had the clinical characteristics as above. A group having low serum iron was 63.5% and in this group period of potential iron deficiency appeared high in incidence just before move to anemia. A group represented positive response was 38.5% in fungus study for Candida albicans. Since we can expect high treatment response by prescription of iron-contained drug and antifungal drug in these patients, diagnosing patients' condition of BMS can be achieved in more various aspects through study for serum iron and Candida albicans. Furthermore, it is expected that treatment protocol can be made.

  • PDF

Observed through the stories of herbal remedies Jeom-hyeol-gigong, philological research of Su-gi therapy (점혈기공요법(點穴氣功療法)을 통해 본 수기요법(手氣療法)의 문헌적(文獻的) 연구(硏究))

  • Kim, In-Chang;Seo, Yun-Huie
    • Journal of Korean Medical Ki-Gong Academy
    • /
    • v.11 no.1
    • /
    • pp.236-261
    • /
    • 2009
  • 'Jeom-hyeol-gigong(點穴氣功)' gives a drill, Gi(氣) as a place to jam. This pathogen(邪氣) is removed. Given the low places and supplement it energy to flow up the well is the cure. This is an internal organ and muscular Gi allows a natural flow. Blood, one that moves and guides Gi is Gi I still feel that it makes any blood, making you feel good in life is flowing with vitality. Gi driving our whole body, while supplying vital energy and blood circulation, helping to defend the body is functioning. 'Jeom-hyeol-gigong' principle of Gi where the blockages to flow naturally energy is to let the flow. Aura of the voluntary and proactive action will be to have healthy bodies. Gi as a whole-body blood circulation leading to the cells in each tissue to supply energy and nutrients to every cell as the original principles of free activities that will maximize your life. Gi to prevent the three causes Internal causes: 5 greed and 7 emotions External causes: climate, food, pathogens, stress, etc. The internal nor the external causes: internal and external factors that cause the complex elements, incorrect position of the bone caused by an imbalance Heart disease will be police officers and raise their resistance to disease than the body, what jung-gi(正氣) have to develop. Beneficial to human body's resistance to raise the jung-gi people young-gi(營氣) and wi-gi(衛氣) should be enhanced. If the form is perfectly possible, Gi cycle itself should not have to breathe. Abdominal diagnosis 'bok-su-ap-an-beop(伏手壓按法)', 'sam-ji-tam-an-beop(三指探按法)' hands are like this, which outlined five viscera in order to understand the problem, the lower side of the clavicle (lung), the pit of stomach (Heart), both the lower ribs (liver), navel below (kidney) can be diagnosed at such areas. In each area of the skin, abdominal muscle tension, aching, or pressing a fuss about, beating the ruling of the state and the problem is a clue. And mo-hyeol(募穴) and certain Acupressure group, the chest, back, belly, so that scattered around each' book 'of the problem can be found. This is also the target of such a diagnosis, such as shape, color of skin, muscle Mostly the scope of the pitch in the cervical spine is broad across the hips. sugi(手氣) method that 'an method(按法) and 'ma method(摩法), bak method(拍法) is.

Seismic Performance of Circular RC Columns Retrofitted Using Ductile PET Fibers (고연성 PET 섬유로 보강된 철근콘크리트 원형 기둥의 내진성능)

  • Vachirapanyakun, Sorrasak;Lim, Myung-Kwan;Choi, Dong-Uk
    • Journal of the Korea Concrete Institute
    • /
    • v.28 no.3
    • /
    • pp.289-298
    • /
    • 2016
  • An experimental research was performed using fibers for the purpose of retrofitting existing reinforced concrete circular columns. Glass fiber (GF) and polyethylene terephthalate (PET) were used as well as combined GF+PET (HF). PET has high tensile strength (over 600 MPa) and high ductility (about 15%), but has very low elastic modulus (about 1/6 of GF). A total of four columns was tested against laterally applied reverse cyclic load: control column, GF-, PET-, and HF-strengthened columns. All columns retrofitted using fibers demonstrated improved moment capacity and ductility. Moment capacity of GF-, PET-, and HF-strengthened columns was 120%, 107%, and 120% of the control column, respectively. Drift ratio of all retrofitted columns also increased by 63 ~ 83% over the control column. The final failure mode of the control column was main bar buckling. The final failure mode of the GF- and HF-strengthened columns was GF rupture while that of the PET-strengthened column was main bar rupture in tension. No damage was observed for PET at the ultimate stage due to excellent strain capacity intrinsic to PET. Current test results indicate that PET can be effectively used for seismic retrofit of RC columns. It is noted that the durability characteristics of PET needs to be investigated in the future.

A Process Model for Virtual Collaboration: Theoretical Synthesis and Empirical Exploration (가상협업을 위한 프로세스 모형)

  • Suh, A-Young;Shin, Kyung-Shik
    • Asia pacific journal of information systems
    • /
    • v.18 no.2
    • /
    • pp.73-94
    • /
    • 2008
  • When individuals collaborated in virtual settings, communication is medicated through a variety of communication technologies, and is associated not only with communication effectiveness but also with socio-emotional interactions among group members. In this regards, scholars have examined how technology-mediated communication systems can be designed and used to facilitated communication interaction. However, the empirical results of the previous studies have revealed inconsistencies in the effects of communication media on users' behavioral or attitudinal responses, and on their viable effectiveness in organizations. Some studies claim that computer-mediated communication(CMC) is task-oriented but not suitable for emotional expression since it hinders close interpersonal interaction. On the other hand, some studies argue that individuals are able to develop interpersonal relationships more effectively in a CMC environment than in an FtF-environment. Due to the different perspectives, a theoretical gap exists, and it leads to the inconsistent research findings. The purpose of this paper is to combine the two different perspectives into single unified model, thereby providing a more realistic and comprehensive understanding about virtual collaboration. The present study here sought to answers the following questions with organizational communication perspective: What are the major components of virtual collaboration? What factors affect the performance of virtual collaboration? And what kind of managerial efforts should organization make in order to facilitate CMC media effectiveness in virtual collaboration? Although there is a certain belief that new media, namely technology-mediated communication support would create new opportunities, the problem of "how" or "why" has been an important question that is still not fully addressed. In this regards, we collectively reexamined previous literatures with major issues which are still controversial and integrated various theoretical activity within computer-mediated communication domain: task-oriented approach, socio-emotional approach, and evolutionary psychological approach. Our first contribution is to develop a framework for virtual collaboration by combining two different perspectives into a single unified model, providing a more realistic and comprehensive understanding. The second main contribution is the joint modeling of both social presence and cognitive effort, and the effects on two distinct but important communication outcomes(i.e., take performance and relational development). We tested the research hypotheses which were developed based on the various CMC theories using data gathered through a self-administered mail survey of 127 individuals of 69 virtual workgroups. The proposed model was supported, providing preliminary evidence that the tension between two opposite view should be integrated. The results show that the individual's psychological processes(social presence and cognitive effort) in a virtual environment significantly mediated the effect of CMC inputs (media richness, user adaptation, and shared contest) on the CMC outputs (task performance and relational development). Furthermore, this study shows that the lack of perceived media richness of CMC media can be complemented by user adaptation and shared context. Based on the results, we discuss how communication system should be designed and implemented so as to promote virtual interaction as well as how a virtual workgroup should be composed to complement the lack of media richness. A virtual collaboration using CMC media may create new value by overcoming the logistical constraints. On the other hand, it may also generate various managerial risks such as communicational depersonalization, process dissatisfaction, and low cohesion. Therefore, this study suggests that organization managers should carefully choose the CMC mediums and monitor individual member's cognitive and affective psychological processes during virtual collaboration to reduce potential risks in virtual collaboration.

Removal of NAPL from Aquifer Using Surfactant-enhanced Air Sparging at Elevated Temperature (승온조건의 SEAS(surfactant-enhanced air sparging) 기술을 이용한 대수층 NAPL(n-decane)의 휘발제거)

  • Song, Young-Su;Kwon, Han-Joon;Kim, Heon-Ki
    • Journal of Soil and Groundwater Environment
    • /
    • v.14 no.6
    • /
    • pp.87-94
    • /
    • 2009
  • Surfactant-enhanced air sparging (SEAS) was developed to suppress the surface tension of groundwater prior to air sparging resulting in higher air saturation and larger contact area between NAPL and gas during air sparging. Larger contacting interface between NAPL and gas means faster mass transfer of contaminants from NAPL to gas phase. This new technique, however, is limited to relatively volatile contaminants because vaporization is its basic mechanism of mass transfer. In this study, SEAS was tested at an elevated temperature for a semi-volatile n-decane, which is expected not to be a good candidate of SEAS application due to its low vapor pressure at ambient temperature. Three sparging experiments were conducted using 1-dimensional column (5 cm id, 80 cm length) packed with sand; (1) ambient temperature ($23^{\circ}C$), column saturated with distilled water, (2) SEAS at ambient temperature ($23^{\circ}C$), for n-decane contaminated sand, (3) SEAS at elevated temperature ($73^{\circ}C$), for n-decane contaminated sand. Higher air saturation was achieved by SEAS compared to that by air sparging without surfactant application. The n-decane removal efficiency of SEAS at elevated temperature was significantly higher(> 10 times) than that of ambient SEAS. The n-decane concentrations in the gas effluent from column during SEAS at $73^{\circ}C$ are found to be 10 times of those measured at ambient temperature. Thus, SEAS technique can be applied for removal of semi-volatile contaminants provided that an appropriate technique for elevating aquifer temperature is available.

Electrode bonding method and characteristic of high density rechargeable battery using induction heating system (유도 가열 접합 시스템을 이용한 대용량 이차전지 전극의 접합 방법 및 특성)

  • Kim, Eun-Min;Kim, Shin-Hyo;Hong, Won-Hee;Cho, Dae-Kweon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.6
    • /
    • pp.688-697
    • /
    • 2014
  • In this study, electrode bonding technology needed for high density of rechargeable battery is studied, which is recently researched for electric vehicle, the small leisure vessel. For the alternative overcoming the limit of stacking amount able to be stacked by conventional ultrasonic welding, the low temperature bonding method, eligible for minimum of degeneration of chemical activator on the electrode surface which is generated by thermal effect as well as the increase of conductivity and tension strength caused by electrode bonding using filler metal, not using conventional direct heating on the electrode material method, is studied. Specifically to say, recently used more generally the ultrasonic welding and spot welding method are not usable for satisfying stable electric conductivity and bonding strength when much electrode is stacking bonded. If the electrical power is unreasonably increased for the welding, due to the effect of welding temperature, deformation of electrode and activating material degeneration are caused, and after the last packaging, decline of electrical output and generating heat cause to reduce stability of battery. Therefore, in this study, induction heating system bonding method using high frequency heating and differentiated electrode method using filler metal pre-treatment of hot dipping are introduced.