• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1286-1295
• /
• 2000

The ventilation effectiveness is evaluated as a function of air exchange rate and supply / extract locations in a simplified model chamber using a tracer gas technique of CO$_2$ gas injected into a supply duct. Ventilation systems consist of supply and extract fans, a CO$_2$gas generator, a CO$_2$gas analyzer and a test chamber. The ventilation effectiveness is evaluated using a step-down method based on ASTM Standard E741-83. The room mean age of the model chamber is decreased with increasing air exchange rate fanged from 6to 10 air changes per hour. The ventilation effectiveness of the mechanical inlet/natural extract system is better than that of the mechanical extract system.

• Proceedings of the SAREK Conference
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.239-243
• /
• 2008

In many literatures the researchers pointed out that the using metal foam will significantly enhance the performance of heat exchanger. This paper focuses on theory study of metal foam, including calculation method of properties of foam (permeability ��K, inertial coefficient f, fiber diameter $d_f$, and effective conductivity $k_e$), model of pressure drop and model of heat transfer. Theory analysis on the performance of heat exchanger will be presented here. Finally the optimal material will be obtained from theory calculation.

• Journal of the Society of Disaster Information
• /
• 제5권2호
• /
• pp.140-152
• /
• 2009

Recently the occurrence ratio of mechanical accidents in industrial disaster of korea is increased, but very little accident information has been given regarding the prevention of mechanical accidents. In this study, mechanical accidents by the analysis of industrial accident case was examined. And it was proposed the risk assessment method and building database for investigation of risk factors in mechanical accident. As a result, from mechanical accidents database, it was found that the occurrence ratio of mechanical accident by constriction and falling etc. is very high and death ratio by mechanical accident is larger than that of usual accident. And we applied the quantitative risk assessment method proposed by this study in the mechanical accident analysis of a domestic manufacturer. From the results, the risk factors due to constriction, curling, falling and scattering are principal causes of mechanical accidents. These result is similar to that of the analysis of mechanical accidents for recent 12 years in korea.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제21권5호
• /
• pp.46-52
• /
• 2022

Although pipe performs various functions in industrial sites and residential spaces, if it is damaged due to corrosion caused by the external environment, it may cause equipment failure or a major accident. For this reason, various studies for safety management are being conducted, but studies on detecting corrosion or cracks on the pipe surface using a laser displacement sensor have hardly been conducted. Therefore, in this study, the corrosion degree of the pipe surface was compared and classified into 4 corrosion conditions, and inspection equipment using a laser scanner was manufactured. The corrosion height was calculated from the four surface data obtained from the measuring equipment and applied to various CNN algorithms, and 91% accuracy was obtained during training using the Modified VGGNet16 code with reduced number of parameters.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1576-1582
• /
• 2002

Vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and magnetic origins which takes place through the motor airgap. When relative misalignment of a rotor in the airgap is introduced during assembly, the dynamic characteristics of the motor system are affected. The rotor-motor system used in a washing machine is modeled using FETM and magnetic forces in a BLDC motor with radial rotor eccentricity are determined analytically The transient whirl responses of a rotor system supported on two roller bearings with relative misalignment in the motor airgap are investigated by considering mechanical and magnetic coupling effects. Results show that rotor misalignment in the airgap considerably affects the vibration of the rotor-motor system.

• Archives of Orthopedic and Sports Physical Therapy
• /
• 제14권2호
• /
• pp.109-115
• /
• 2018

Purpose: McKenzie is a widely-used and conventional clinical therapeutic exercise for patients with mechanical lower back pain. It is a well-designed assessment and classification system for the spine. Main issue: Patients with mechanical lower back pain are classified into one of three mechanical syndromes (posture, dysfunction, or derangement syndrome) by mechanical loading strategies. These methods evaluate symptomatic and mechanical responses during repeated end-range movement and sustained postures. The goal of McKenzie mechanical syndrome diagnosis is to determine directional preferences. Directional preference is a phenomenon of preference for posture or movement in one direction, which reduces or centralizes pain. However, in Korea, there is a lack of awareness of basic McKenzie mechanical syndromes diagnostic concepts. Koreans tend to think of the McKenzie method as a simple lumbar extension exercise. However, an accurate diagnosis of a mechanical syndrome must precede the application of McKenzie exercise. Conclusions: Thus, in this study, I present a classification method of McKenzie mechanical syndrome diagnosis and clinical characteristics of each mechanical syndrome.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.693-698
• /
• 2001

The analysis of actuating forces (or torques) and joint reaction forces (or moments) are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an inverse dynamic analysis algorithm for flexible multibody systems with closed-loops in the relative joint coordinate space. The joint reaction forces are analyzed in Cartesian coordinate space using the inverse velocity transformation technique. The joint coordinates and the deformation modal coordinates are used as the generalized coordinates of a flexible multibody system. The algorithm is verified through the analysis of a slider-crank mechanism.

• Interaction and multiscale mechanics
• /
• 제2권2호
• /
• pp.189-207
• /
• 2009

Dynamics of the electric system for the toroidal drive under mechanical disturbance is presented. Using the method of perturbation, free vibrations of the electric system under mechanical disturbance are studied. The forced responses of the electric system to voltage excitation under mechanical disturbance are also presented. We show that as the time grows, the resonance vibration caused by voltage excitation still exists and the vibrations caused by mechanical disturbance are enlarged. The coupled resonance vibration caused by mechanical disturbance and voltage excitation is discussed. The conditions of the occurrence of coupled resonance are studied.

• Proceedings of the Optical Society of Korea Conference
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.179-180
• /
• 2008

Optical Mechanical splice is essential component to construct for FTTH. Optical Mechanical splice is executed many countries' FTTH including Korea. In this paper, we have designed Optical Mechanical splice using UV and completed a series of mechanical and environmental tests on the optical Mechanical splice. And the results of tests and Bellcore-requirements for optical Mechanical splice will be presented. Accordingly, evaluation method of optical Mechanical splice has gained power to improve the quality and stability of it.

• Journal of the Korean Society for Precision Engineering
• /
• 제18권1호
• /
• pp.12-20
• /
• 2001