• Journal of Korea Entertainment Industry Association
• /
• v.13 no.8
• /
• pp.505-514
• /
• 2019

The purpose of this study is to analyze the difference of the visual perception and attention of the people with intellectual disability from the application of the assessment applying an electronic media and traditional paper material. The study subjects were 12 people with intellectual disability, To assess the visual perception, the motor free visual perception test-3 was used and the trail making test was used to assess the visual attention. After the assessment of the visual perception and attention applying the traditional paper material, the assessment applying the electronic media. The results of the visual perception and attention showed the difference of the visual perception and attention, and the scores of the visual perception and attention applying the assessment of the electronic media showed the more higher than the assessment of the traditional paper material. The electronic media could be worked as a factor to increase the visual perception and attention of the people with intellectual disability. Thus, the difference should be considered to apply the electronic media for them.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.117-122
• /
• 2022

This paper proposes a method for evaluating the work of manufacturing workers using MediaPipe as a risk factor for musculoskeletal diseases. Recently, musculoskeletal disorders (MSDs) caused by repeated working attitudes in industrial sites have emerged as one of the biggest problems in the industrial health field while increasing public interest. The Korea Occupational Safety and Health Agency presents tools such as NIOSH Lifting Equations (NIOSH), OWAS (Ovako Working-posture Analysis System), Rapid Upper Limb Assessment (RULA), and Rapid Entertainment Assessment (REBA) as ways to quantitatively calculate the risk of musculoskeletal diseases that can occur due to workers' repeated working attitudes. To compensate for these shortcomings, the system proposed in this study obtains the position of the joint by estimating the posture of the worker using the posture estimation learning model of MediaPipe. The position of the joint is calculated using inverse kinetics to obtain an angle and substitute it into the REBA equation to calculate the load level of the working posture. The calculated result was compared to the expert's image-based REBA evaluation result, and if there was a result with a large error, feedback was conducted with the expert again.

• English Language & Literature Teaching
• /
• v.15 no.4
• /
• pp.157-175
• /
• 2009

This paper offers a critical review of a newspaper argument regarding the problems of high school education assessment for university entrance examination system in the United Kingdom. The media account raises three sets of questioning to hold that the nation's long-standing A-levels have failed and is no longer viable as a high-stakes test. However, it is found that the writer's argumentations involving misleading conceptions can be deconstructed because of invalid reasoning and unreliable evidence. So, it is proposed that a reasonable solution to replace the discredited A-level exams should be to adopt an eclectic approach for assessing candidates' multiple capabilities; performance, potentiality and critical thinking skills. These criteria for component-oriented assessments are designed to measure their high school academic achievements and intellectual capacity for tertiary education; in the process of such measurement, critical-logical reasoning abilities for sound judgment and problem-solving tasks should be incorporated with the basic precondition that each university possesses its own discretion for the determination of adequate proportions to reflect each of the assessment outcomes. It is, therefore, expected that this critical review will inspire the readers to understand aspects of assessment as an educational field and to confirm how seriously they may be misguided by a distorted media argumentation without substantive background knowledge.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.3
• /
• pp.131-152
• /
• 2017

The purpose of this study was to investigate the relationship between media richness, media usefulness, media experience and media decision in order to identify factors that determine the media of school library in solving performance evaluation tasks. For this purpose, 132 primary and middle school students were surveyed and their structural equation was set up by hypothesis setting, validity test, and causal model. As a result, it was confirmed that media experience of school library is a major factor in media decision. Also, media richness and media experience appeared to influence media decision through media usefulness. The analysis implies that school library is centered on teaching - learning process and evaluation, so information literacy education should be carried out in school curriculum and school library is required to provide students experience on media as the center of school education.

• Korean Journal of Child Studies
• /
• v.31 no.5
• /
• pp.31-45
• /
• 2010

This study was conducted in order to investigate the effect of students' attitudes to internet media language and orthographic knowledge on their use of internet media language. The participants were 989 students in the 4th to 11th grades in Kyunggi-do. It was found that the participants used more internet media language in internet literacy than for general writing. Elementary students exhibited significantly less orthographic knowledge and used more internet media language to write on the internet than older students. Students' attitudes to internet media language went a long way to explaining their self-assessment on the frequency of using internet media language and their genuine use of internet media language on the internet. Their orthographic knowledge, however, was not a significant predictor for their use of internet media language.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.7
• /
• pp.2938-2956
• /
• 2020

Objective image quality assessment (IQA) models have been developed by effective features to imitate the characteristics of human visual system (HVS). Actually, HVS is extremely sensitive to color degradation and complex texture changes. In this paper, we firstly reveal that many existing full reference image quality assessment (FR-IQA) methods can hardly measure the image quality with contrast and masking texture changes. To solve this problem, considering texture masking effect, we proposed a novel FR-IQA method, called Texture and Color Quality Index (TCQI). The proposed method considers both in the masking effect texture and color visual perceptual threshold, which adopts three kinds of features to reflect masking texture, color difference and structural information. Furthermore, random forest (RF) is used to address the drawbacks of existing pooling technologies. Compared with other traditional learning-based tools (support vector regression and neural network), RF can achieve the better prediction performance. Experiments conducted on five large-scale databases demonstrate that our approach is highly consistent with subjective perception, outperforms twelve the state-of-the-art IQA models in terms of prediction accuracy and keeps a moderate computational complexity. The cross database validation also validates our approach achieves the ability to maintain high robustness.

• Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.53-60
• /
• 2009

The main objective was to develop and assess a dynamic fate and transport model for lead in air, soil, sediment, water and vegetation. Daejeon was chosen as the study area for its relatively high contamination and emission levels. The model was assessed by comparing model predictions with measured concentrations in multi-media and atmospheric deposition flux. Given a lead concentration in air, the model could predict the concentrations in water and soil within a factor of five. Sensitivity analysis indicated that effective compartment volumes, rain intensity, scavenging ratio, run off, and foliar uptake were critical to accurate model prediction. Important implications include that restriction of air emission may be necessary in the future to protect the soil quality objective as the contamination level in soil is predicted to steadily increase at the present emission level and that direct discharge of lead into the water body was insignificant as compared to atmospheric deposition fluxes. The results strongly indicated that atmospheric emission governs the quality of the whole environment. Use of the model developed in this study would provide quantitative and integrated understanding of the cross-media characteristics and assessment of the relationships of the contamination levels among the multi-media environment.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.2
• /
• pp.12-29
• /
• 2011

Risk-based screening levels (RBSLs) of some pollutants for residential adults were derived with risk assessment tools developed by United States Environmental Protection Agency (USEPA), American Society for Testing and Materials (ASTM), and Korea Ministry of Environment (KMOE) and compared each other. To make the comparison simple, ingestion of soil, dermal contact with soil, outdoor inhalation of vapors, indoor inhalation of vapors, and inhalation of soil particulates were chosen as exposure pathways. The results showed that the derived RBSLs varied for every exposure pathway. For direct exposure pathways (i.e., ingestion of soil and dermal contact with soil), the derived RBSLs varied mainly due to the different default values for exposure factors and toxicity data. When identical default values for the parameters were used, the same RBSLs could be derived regardless of the assessment tools used. For inhalation of vapors and inhalation of soil particulates, however, different analysis methods for cross-media transfer rates were used and different assumptions were established for each tool, identical RBSLs could not be obtained even if the same default values for exposure factors were used. Especially for inhalation of soil particulates pathway, screening level derived using KMOE approach (most conservative) was approximately 5000~10000 times lower than the screening level derived using ASTM approach (least conservative). Our results suggest that, when deriving RBSL using a specific tool, it is a prerequisite to technically review the analysis methods for cross-media transfer rates as well as to understand how the assessment tool derives the default values for exposure factors.

• Journal of Environmental Health Sciences
• /
• v.44 no.6
• /
• pp.548-555
• /
• 2018

Objectives: We conducted ecological risk assessment for cadmium, a heavy metal and carcinogen, to identify safety standards by environmental media and to determine its impact on ecosystems by estimating and evaluating exposure levels. Methods: Species sensitivity distributions (SSDs) were generated using ECOTOX DB. A hazardous concentration of 5% (HC5) protective of most species (95%) in the environment was estimated. Using this estimate, predicted no effect concentrations (PNECs) were calculated for aquatic organisms. Based on the calculated PNECs for aquatic organisms, PNEC values for soil and sediment were calculated using the partition coefficient. Predicted exposure concentrations (PECs) were also calculated from environmental monitoring data with hazard quotients (HQs) calculated using PNECs for environmental media. Results: Chronic toxicity data were categorized into four groups and 11 species. In species sensitivity distribution (SSD) analysis, HC5 was $0.340{\mu}g/L$. Based on this value, the PNEC value for aquatic organisms was calculated as $0.113{\mu}g/L$. PNEC values for soil and sediments using a partition coefficient were calculated as 15.02 mg/kg and 90.61 mg/kg, respectively. In an analysis of environmental monitoring data, PEC values were calculated as $0.017{\mu}g/L$ for water, 1.01 mg/kg for soil, and 0.521 mg/kg for sediment. Conclusions: HQs were 0.150, 0.067 and 0.006 for water, soil and sediment, respectively. HQs of secondary toxicity were 0.365 for birds and 0.024 for mammals. In principle, it is judged that an HQ above 1 indicates a high level of risk concern while an HQ less than 1 indicates an extremely low level of risk concern. Therefore, with HQs of cadmium in the environment being <1, its risk levels can be considered low for each media.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.634-640
• /
• 2017

Toxicity and fate assessment is necessary in the evaluation of the environmental, health and safety risks of engineered nanomaaterials (ENMs). Therefore, in order to ensure the reproducibility, reliability and relevance of ENMs toxicity results, stable and monomodal dispersion protocols in toxicity test media are needed. Zinc oxide nanoparticles (nZnO) are widely used in various products such as cosmetic products, paper, paints etc. In this study, nZnO dispersions in ecotoxicity test media were produced by following a series of steps of modified National Institute of Standards and Technology (NIST) Special publication 1200-5. In addition, natural organic matter (humic acid (HA)) was used as a stabilizing agent to disperse nZnO in the test media. The hydrodynamic diameters (HDD) of the nZnO in dispersion ranged between 150 and 200 nm according to the dynamic light scattering (DLS) measurement. Based on these dispersions in ecotoxicity test using ecological species (Oryzias latipes, Daphnia magna, Pseudokirchneriella subcapitata and Chironomusus riparius), dispersion protocol was found to have a considerable potential in ecotoxicity test of ENMs.