• Computers and Concrete
• /
• v.27 no.2
• /
• pp.175-184
• /
• 2021

The incorporation of pozzolans to Portland cement pastes adds value in the development of new materials for the construction industry. This study presents a new computational method, complementary to the pozzolanic identification by compressive strength at 28 days method, for supporting the validation of pozzolanic mortars for non-structural purposes. An algorithm capable of classifying the pixels of micrographs of specimens fragments was developed. Therefore, comparative analyses were generated from fractional Gaussian representations in four intervals of the same amplitude that indicated the predispositions to form larger void indices (intervals 1 and 2). The results showed that the computational method indicators are in accordance with the physical and chemical indicators.

• Animal Systematics, Evolution and Diversity
• /
• v.36 no.2
• /
• pp.113-122
• /
• 2020

From a moss sample, we isolated and identified Notohymena gangwonensis Kim et al., 2019 based on morphological and molecular data. The moss and type population has completely identical 18S rRNA (nuclear small subunit ribosomal RNA) gene sequences and both are highly similar in morphological and morphometric attributes, except for the diameter and arrangement of the cortical granules. Thus, we reexamined the type materials(i.e., micrographs and gDNA) and resulted in finding mistakes made by the authors of the species. Based on these data and supporting materials newly obtained (i.e., internal transcribed spacer [ITS] 1, ITS2, 5.8S, and partial 28S rDNA sequences, and scanning electron micrographs), we provide improved diagnosis of the species to clarify its identity. In addition, a key for Notohymena species is provided.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.35-46
• /
• 1989

Experiments described in which cotton fabrics at different stages of chemical processing were abraded to different extents on a Stoll Abrasion Tester with three different abradants, namely, a worsted fabric, flax fabric and silicon carbide paper. The four different plain-weave cotton fabrics selected were 1) desized, 2) scoured and bleached, 3) mercerized, 4) resin-treated. The surface abrasive damages of treated fabrics were observed by SAM, and load-elongation percent retentions of abraded samples were measured by Instrong Tester. The result were as follows: 1. The maximum percent retention of load-elongation with three different abradants was exhibited by the scoured and bleached fabrics and the minimum by the resin finished fabric. 2. The electron micrographs of four different cotton fabrics abraded by flax, worsted fabric abradants for 900 rubs showed a large number of criss-crossing stray fibers in fabric structure. It may be the molecular adhesion for frictional resistance to be explained. 3. The electron micrographs of four different cotton fabrics abraded by silicone carbide abradants showed the form of busing or mashing fibers in fabric structure. The above might be on the basis of the ploughing theory.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1142-1147
• /
• 2006

Cement-stabilized clay has widespread applications in Deep Mixing projects, whereby soft deep clay deposits are improved through the addition of cement. While much research on this subject has taken place over the past decade, the strength and deformation behaviour of cement-stabilized clay is still not well understood. An extensive laboratory program was conducted on kaolin stabilized with up to 10% cement. Water curing was employed for durations up to 112 days. To study the microstructure of raw and stabilized soil, use is made of SEM. Micrographs of selected raw and stabilized soil were obtained. These micrographs were closely analyzed for any change in the microstructure of the soil as a result of stabilization.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.93-95
• /
• 1994

• Journal of Ginseng Research
• /
• v.13 no.1
• /
• pp.49-55
• /
• 1989

The change in bodyweight, organ weight and the amount of water intake were investigated to assess the effect on a range of toxicological parameters of varying dosages of polyacetylene compounds. Concerning inhibition of solid tumor growth induced by Sarcoma-180 cells in the ICR mouse strain, relytionships between the dosage of polyacetylene compoilnds used and several toxicological parameters were observed. When 40μmoles/kg b.w. of panaxydol tvas administered for 3 consecutive days, the suppression of body weight growth in Wistar rats was about 17% that of the control group, however, the body weight gain was normalized 4 days after stopping arlnlinistration of the polyacetylene compounds. When the dosage of polyacetylenes was reduced to 20μmoles/kg b.w., the change in body weight gain was alleviated to within l0% of the control and the suppremission of the body weight gain increased in order for Panaxydol, Panaxynol, and Panaxytriol. The organ weight did not show any significant change between the control and the polyacetylene administered groups. Electron micrographs of the liver tissues of ICR mice injected with 40Umoles/kg b.w. of panaxydol gave no further significant information about toxicological changes. Keywords Polyacrtylenes, toxicological parameters, body weight, panaxydol, organ weight, electron micrographs .

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.194-198
• /
• 2008

Several methods for improving dispersion of carbon nanotubes (CNTs) have been investigated. CNTs modified by acids and hydrogen peroxide ($H_2O_2$) showed improved dispersion. From SEM micrographs and photos of dispersion, CNTs modified with nitric acid and $H_2O_2$, showed no agglomeration in solution even standing for 4 months, which means successfully improved dispersion property. TEM micrographs of surface modified single CNT treated with 69% $HNO_3$ in boiling acid solution as the optimum method were obtained. For confirmation of CNTs' application to EDLC electrode materials, characteristics of EDLC have been analyzed by cyclic voltammetry curve, specific capacitance of unit cell, electrode discharge curves and AC impedance curve. From the results, it could be confirmed that electrochemical properties of CNTs were enhanced after surface modification with 69% $HNO_3$ acid treatment.

• Geomechanics and Engineering
• /
• v.21 no.5
• /
• pp.413-422
• /
• 2020

The choice of eco-friendly materials for ground improvement is a necessary way forward for sustainable development. Adapting naturally available biopolymers will render the process of soil stabilization carbon neutral. An attempt has been made to use β-glucan, a natural biopolymer for the stabilization of lean clay as a sustainable alternative with specific emphasis on comprehending the effect of confining stresses on lean clay through triaxial compression tests. A sequence of laboratory experiments was performed to examine the various physical and mechanical characteristics of β-glucan treated soil (BGTS). Micro-analysis through micrographs were used to understand the strengthening mechanism. Results of the study show that the deviatoric stress of 2% BGTS is 12 times higher than untreated soil (UTS). The micrographs from Scanning Electron Microscopy (SEM) and the results of the Nitrogen-based Brunauer Emmett Teller (N₂-BET) analysis confirm the formation of new cementitious fibres and hydrogels within the soil matrix that tends to weld soil particles and reduce the pore spaces leading to an increase in strength. Hydraulic conductivity (HC) and compressibility reduced significantly with the biopolymer content and curing period. Results emphases that β-glucan is an efficient and sustainable alternative to the traditional stabilizers like cement, lime or bitumen.

• The Korean Journal of Zoology
• /
• v.33 no.4
• /
• pp.454-460
• /
• 1990

The effed of acrylamide on the nervous system has heen morphologically studied using light and electron microscopes. The light micrographs on central and pedpheral nervous tissues of mouse treated with acrylamide monomer showed total vacuolation of spinal cord, cell degradation containing neuron and neuroglia, and distal nerve fiber degeneration. The electron micrographs showed ultrastrudural changes. Abnormal mitochondria in neuron, splitting of myelin sheath in lumbar ventral root nerve, partial disintergration of myelin sheath and axoplasmic degeneration in sciatic nerve, and overafl polyneuropathies in nervous system were observed. These results suggest that acrylarnide intoxicated mouse shows distal behavioral neuropathy as an earlist clinical sign, but the initial effect of acrylamide on the nervous system seems to appear at nearly the same time in both central and peripheral nervous systems.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.31-36
• /
• 2004

In this paper, fretting wear tests were conducted in air at room temperature (RT) and in water at high temperature and high pressure (HTHP) environment to analyze the wear characteristic. As for the supporting condition between the tube and spring/dimple, the gap of 0.2 mm in air at RT and the normal force of 10 N and the slip of $50\;{\mu}\;m$ in water at HTHP were applied. Four different shapes of spring/dimple specimen (type A, B, C, D) were used. Detail eaxamination of wear scar was also performed using SEM micrographs. As a result, in the case of the spring of truncated wedge, severer wear occurs than the others. Protrusion part was found and larger in air at RT. It is thought that the difference in the wear volume and the protrusion is caused by the different wear mechanism corresponding to the different environment.