• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.113-120
• /
• 2008

This study analyzed the spatial correlograms of minutely rainfall data with respect to various accumulation times. A bivariate mixed lognormal distribution was applied for rainfall modelling. A total of 26 minutely rainfall data sets from rain gauge stations in the central part of Korean peninsula were analyzed, also repeated for several storm types like Jang-Ma, typhoon and convective storms for their comparison. The accumulation times 1, 2, 3, 5, 10, 30 and 60 minutes were considered in this study. As results, it was found that the minutely rainfall data available was not good enough for estimating minutely rainfall intensity at ungaged locations. It seems more practical to use the hourly rainfall data with much higher rain gauge density, if proper methods for interpolation and data dis-aggregation are provided.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.319-326
• /
• 2015

Rainfall data is necessary component for water resources design and flood warning system. Most analysis are used long-term hourly data of surface synoptic stations from the Meteorological Administration, Ministry of land, Infrastructure and Transport and others. However, It will be used minutely data of more high density automatic weather stations than surface synoptic stations expecting to increase the frequency of heavy precipitation. But minutely data has a problem about quality of rainfall data by auto observation. This study analyzed about quality control method using automatic weather station's minutely rainfall data of meteorological administration. It was performed assessment of the quality control that was classified quality control of miss Data, outlier data and rainfall interpolation. This method will be utilized when hydrological analysis uses minute rainfall data.

• Journal of Korea Water Resources Association
• /
• v.40 no.8
• /
• pp.643-654
• /
• 2007

This study proposes and evaluates a methodology for deriving the rainfall intensity- duration-frequency relationship for durations less than 10 minutes used for designing drainage systems in small urban catchments and roads. The method proposed in this study is based on the Moupfouma distribution, which has been evaluated by applying it to the rainfall data at the meteorological Seoul station. Summarizing the results is as follows: (1) The frequency analysis results using minutely rainfall data was found not to be corresponded with the extrapolation of that by the Ministry of Construction and Transportation (2000). (2) The annual maxima minutely rainfall data derived by applying the Moupfouma distribution to the accumulated 60-minute data was found to well reproduce the characteristics of those of observed. (3) The rainfall intensity-duration-frequency relationship derived by applying the Moufouma distribution to the accumulated 50-minute data and hourly data was found insignificant.

• Journal of Korea Water Resources Association
• /
• v.45 no.3
• /
• pp.275-290
• /
• 2012

In this study, we have developed an optimal time distribution model through extraction of peaks over threshold (POT) series. The median values for annual maximum rainfall dataset, which are obtained from the magnetic recording (MMR) and the automatic weather system(AWS) data at Seoul meteorological observatory, were used as the POT criteria. We also suggested the improved methodology for the time distribution of extreme rainfall compared to Huff method, which is widely used for time distributions of design rainfall. The Huff method did not consider changing in the shape of time distribution for each rainfall durations and rainfall criteria as total amount of rainfall for each rainfall events. This study have suggested an extracting methodology for rainfall events in each quartile based on interquartile range (IQR) matrix and selection for the mode quartile storm to determine the ranking cosidering weighting factors on minutely observation data. Finally, the optimal time distribution model in each rainfall duration was derived considering both data size and characteristics of distribution using kernel density function in extracted dimensionless unit rainfall hyetograph.

• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.599-606
• /
• 2018

Most hydrological analysis such as probability rainfall and rainfall time distributions have typically carried out based on hourly rainfall and rainfall - runoff analysis have carried out by applying different periods of rainfall time distribution and probability rainfall. In this study, to quantify the change of design flood due to the data type (hourly and minutely rainfall data) and the probability rainfall and application of different data period to the rainfall time distribution, probability rainfall is calculated by point frequency analysis according to data type and period and rainfall time distribution was calculated by Huff's quartile distributions. In addition, the change analysis of design flood was carried out by rainfall - runoff analysis applying different data periods of design rainfall time distribution. and probability rainfall. As a result, rainfall analysis using minute rainfall data was more accurate and effective than using hourly rainfall data. And the design flood calculated by applying different data period of rainfall time distribution and probability rainfall made a large difference than by applying different data type. It is expected that this will contribute to the hydrological analysis using minutely rainfall.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.679-682
• /
• 2008

Probability precipitation is one of the most important factor for designing the hydrology structures. Probability precipitation is calculated based on the frequency analysis on each durations of annual maximum rainfall data. For frequency analysis we need a conversion factor between the rain data per random-time interval and fixed-time-interval. In this study, the minutely precipitation data on observatory of the Meteorological Administration are used for 37 stations. Therefore, we should conversion factors between the rain data per minute and fixed-time-interval.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.183-183
• /
• 2021

Deep learning methods and their application have become an essential part of prediction and modeling in water-related research areas, including hydrological processes, climate change, etc. It is known that application of deep learning leads to high availability of data sources in hydrology, which shows its usefulness in analysis of precipitation, runoff, groundwater level, evapotranspiration, and so on. However, there is still a limitation on microclimate analysis and prediction with deep learning methods because of deficiency of gauge-based data and shortcomings of existing technologies. In this study, a real-time rainfall prediction model was developed from a sky image data set with convolutional neural networks (CNNs). These daily image data were collected at Chung-Ang University and Korea University. For high accuracy of the proposed model, it considers data classification, image processing, ratio adjustment of no-rain data. Rainfall prediction data were compared with minutely rainfall data at rain gauge stations close to image sensors. It indicates that the proposed model could offer an interpolation of current rainfall observation system and have large potential to fill an observation gap. Information from small-scaled areas leads to advance in accurate weather forecasting and hydrological modeling at a micro scale.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.739-745
• /
• 2018

Recently, the incidence of heavy rainfall is increasing. Therefore, a rainfall analysis should be performed considering increasing frequency. The current rainfall analysis for hydrologic design use the hourly rainfall data of ASOS with a density of 36 km on the Korean Peninsula. Therefore, medium and small scale watershed included Thiessen network at the same rainfall point are analyzed with the same design rainfall and time distribution. This causes problem that the watershed characteristics can not be considered. In addition, there is a problem that the temporal-spatial change of the heavy rainfall occurring in the range of 10~20 km can not be considered. In this study, Author estimated design rainfall considering heavy rainfall using minutely rainfall data of AWS, which are relatively dense than ASOS. Also, author analyzed the time distribution and runoff of each case to estimate the huff's method suitable for the watershed. The research result will contribute to the estimation of the design hydrologic data considering the heavy rainfall and watershed characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.515-524
• /
• 2008

An estimation of reliable probability precipitation is one of the most important processes for reasonable hydrologic structure design. A probability precipitation has been calculated by frequency analysis using annual maximum rainfall series on the each duration among the observed rainfall data. Annual maximum rainfall series have abstracted on hourly rainfall data or daily rainfall data. So, there is necessary to proper conversion factor between the fixed and sliding durations. Therefore, in this study, conversion factors on the each duration between fixed and sliding durations have calculated using minutely data compared to hourly and daily data of 37 stations observed by Meteorological Administration in Korea. Also, regression equations were computed by regression analysis of conversion factors on the each duration. Consequently, conversion factors were used basis data for calculations of stable probability precipitation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.6
• /
• pp.55-69
• /
• 2016

RUSLE (Revised Universal Soil Loss Equation) is the empirical formular widely used to estimate rates of soil erosion caused by rainfall and associated overland flow. Among the factors considered in RUSLE, rainfall erosivity factor (R factor) is the major one derived by rainfall intensity and characteristics of rainfall event. There has been developed various methods to estimate R factor, such as energy based methods considering physical schemes of soil erosion and simple methods using the empirical relationship between soil erosion and annual total rainfall. This study is aimed to quantitatively evaluate the variation among the R factors estimated using different methods for South Korea. Station based observation (minutely rainfall data) were collected for 72 stations to investigate the characteristics of rainfall events over the country and similarity and differentness of R factors calculated by each method were compared in various ways. As results use of simple methods generally provided greater R factors comparing to those for energy based methods by 76 % on average and also overestimated the range of factors using different equations. The variation coefficient of annual R factors was calculated as 0.27 on average and the results significantly varied by the stations. Additionally the study demonstrated the rank of methods that would provide exclusive results comparing to others for each station. As it is difficult to find universal way to estimate R factors for specific regions, the efforts to validate and integrate various methods are required to improve the applicability and accuracy of soil erosion estimation.