• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.58-63
• /
• 2009

In this paper, the power loss due to PV module mismatch in PV string is analyzed and a mismatch compensation method is proposed to improve the efficiency of PV system. The analysis of mismatch loss using PV model simulation reveals that the mismatch module may decrease the total efficiency because the MPPT function of power conditioner make the PV system operate at the local maximum point. The mismatch loss can be severe if the maximum power point current of mismatch module is less than that of string. The proposed compensation method which is simply implemented with a buck type converter shows the possibility to remove the mismatch loss. The effectiveness of the analysis and compensation method is verified by a prototype experiment.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.25-27
• /
• 2010

This paper presents a gain and phase mismatch calibration technique for an image-reject RF receiver. The gain mismatch is calibrated by directly measuring the output signal amplitudes of two signal paths. The phase mismatch is calibrated by measuring the output amplitude of the final IF output at the image band. The calibration of the gain and phase mismatch is performed at power-up, and the normal operation of the RF receiver does not interfere with the mismatch calibration circuit. To verify the proposed technique, a 2.4-GHz Weaver image-reject receiver with the gain and phase mismatch calibration circuit is implemented in a 0.18-${\mu}m$ CMOS technology. The overall receiver achieves a voltage gain of 45 dB and a noise figure of 4.8 dB. The image rejection ratio(IRR) is improved from 31 dB to 59.76 dB even with 1 dB and $5^{\circ}$ mismatch in gain and phase, respectively.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1939_1941
• /
• 2009

The modulation quality of the RF transmitter in a wireless communication system usually affects system performance and it mostly depends on both a nonlinearity and a distortion, from the intermodulation products and the I/Q mismatch such as I/Q amplitude error and a local phase error, respectively. This paper focused on how much the error vector magnitude(EVM) which describes the modulation accuracy changes according to the variation of the I/Q mismatch components at I/Q modulator. For this work, the equation for the EVM including the I/Q mismatch components can be induced and calculated in accordance with the variation of the I/Q mismatch components. Consequently, the effect of I/Q mismatch components on the EVM, which is required in the transmitter specification of Personal Area Network, can be clearly analyzed.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.465-470
• /
• 2001

The adhesively-bonded joints considered in this investigation include single-lap joint and double-lap joint. For an adhesively bonded double-lap joint, end mismatch between the two cuter adherends(upper, lower) can not removed completely although it can be controlled within a manufacturing tolerance. This paper shows that the end mismatch introduces local bending and end mismatch affects the shear and peel stresses in the adhesive. The double-lap joint with an end mismatch is affected of adhesive thickness, material properties of adhesive and adherend etc. Also, we concluded that there are critical value of an end mismatch to provoke the interface fracture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.35-43
• /
• 2011

In this paper, an analysis on I/Q mismatch characteristics of a quadrature LC VCO(Voltage controlled oscillator) is presented. Based on this analysis, a new I/Q mismatch compensator is proposed. The proposed I/Q mismatch compensator utilizes an amplitude mismatch detector rather than the conventional phase mismatch detector requiring much more wide frequency bandwidth. To verify the proposed circuit, a 2.5GHz quadrature LC VCO was designed in a $0.18{\mu}m$ CMOS process and tested. Test results show that an amplitude mismatch detector achieves similar I/Q mismatch compensation performance as that of the conventional phase mismatch detector. The I/Q mismatch compensator consumes 0.4mA from 1.8V supply voltage and occupies $0.04mm^2$.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1268-1274
• /
• 1997

Effect of elastic/plastic mismatch on the fracture of Si3N4 coating in Si3N4/Si3N4 -BN bilayer was investigated by Hertzian indentation testing. A different amount of mismatch between two layers was induced by different BN addition in the substrate layer, and Hertizian cracks were induced by using WC ball indenter. As a result, as the elastic/plastic mismatch between coating and substrate layer increased, the coating fracture easily occurred. A bending stress induced by different elastic/plastic mismatch was main reason to cause the fracture of coating.

• Journal of Industrial Convergence
• /
• v.5 no.2
• /
• pp.99-120
• /
• 2007

The purposes of this paper are to investigate mismatch in labor supply and demand on small and medium industries in Suwon region by conducting surveys to potential employees and employers, and to suggest alternative policy means to eliminate those mismatch conditions. Reasons of occupation change, difference in terms desired in occupation between potential employee and employer, understanding in mismatch, and measure of labor shortage by firms are analyzed in this paper. The report's recommendations to eliminate labor mismatch in small and medium industry are categorized into two groups: working conditions and occupation competence. Narrowing the working conditions gap, utilization of idle workers, establishment of flexible wage system are suggested to eliminate labor condition mismatch. In addition, potential employees need to meet working requirements by building up both wide use ability, occupation specific ability, and industry specific ability.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.170-171
• /
• 2010

The power loss due to PV module mismatch in PV array system is analyzed and a mismatch compensation method is proposed. A dc-dc converter is used to compensate for series mismatch caused by a low current module in a string. The converter is controlled to maximize the array power output. The proposed compensation method was verified by PSpice simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.148-154
• /
• 2005

This paper deals with performance degradations caused by RF I/Q impairments such as amplitude mismatch and phase mismatch in W-CDMA user equipment which uses QPSK(Quadrature Phase Shift Keying) modulation. The impacts of I/Q impairments on the BER(Bit Error Rate) are analyzed by using the variations of adjacent symbol distance. The BER versus amplitude mismatch and phase mismatch with QPSK constellation is reviewed through Matlab simulation. Performance degradation produced by RF I/Q impairments is measured with the implemented RF transceiver and modulation/demodulation test equipments through EVM(Error Vector Magnitude). The minimum performance requirements of amplitude mismatch and phase mismatch in W-CDMA user equipment are presented from the point of hardware implementation and the test method of the impairments is also included.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.123-125
• /
• 2009

Mismatch of electrical characteristics of modules in PV string invokes mismatch power loss. The mismatch occurs due to various causes such as shadow, aging, contamination, and module exchange. The concept of mismatch compensation converter(MCC) is presented in this paper to remedy the mismatch loss problem. MCC is connected to irregular modules only. MCC is composed of dc-dc converter and MPPT controller. It is noted that MPPT algorithm is employed to control MCC and is effective for maximum power available from irregular modules. The selection guide of MPPT control period is given based on the period of MPPT in PCU. The effectiveness of the MCC is verified by a prototype experiment.