• 정보기술과데이타베이스저널
• /
• 제8권1호
• /
• pp.41-65
• /
• 2001

This study proposes evaluation dimensions of object-oriented systems modelling tools and activities available in object-oriented systems development practices. The dimensions ale developed based on previous research in cognitive psychology, information systems modeling study, and object-oriented systems analysis arid design areas. The proposed dimension is composed of two dimensions. The one dimension includes abstraction levels of modelling and the other includes process and representation in modeling activities. Experts on object-oriented modeling were selected to evaluate the practical validity of the proposed dimensions and applications of major object-oriented modeling tools during systems development project. Most of the tools were observed to be used for representing objects rather than for modeling the process of related objects. The proposed modeling dimension will be evaluated for acquiring general validity in future empirical research.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.18-26
• /
• 2002

With the introduction of Fractal notation, various fields of engineering adopted fractal notation to express characteristics of geometry involved and one of the most frequently applied areas was turbulence. With research on turbulence regarding the surface as fractal geometry, attempts to analyze turbulent premised flame as fractal geometry also attracted attention as a tool for modeling, for the flame surface can be viewed as fractal geometry. Experiments focused on disclosure of flame characteristics by measuring fractal parameters were done by researchers. But robust principle or theory can't be extracted. Only reported modeling efforts using fractal dimension is flame speed model by Gouldin. This model gives good predictions of flame speed in unstrained case but not in highly strained flame condition. In this research, approaches regarding fractal dimension of flame as one representative value is pointed out as a reason for the absence of robust model. And as an extort to establish robust modeling, Presents methods treating fractal dimension as statistical variable. From this approach flame characteristics reported by experiments such as Da effect on flame structure can be seen quantitatively and shows possibility of flame modeling using fractal parameters with statistical method. From this result more quantitative model can be derived.

• 한국패션뷰티학회지
• /
• 제2권3호
• /
• pp.60-67
• /
• 2004

Representing all the parts of human body visible to fit into the script, it can be told that real make-up has been done. Based on the point of view. it will be different from others. To become the beautiful, beauty make-up has to be done, however, to be someone described in the script or any other factions after analyzing characters of being represented, special make-up fits into that category. In the special make-up, there are two different pins: one is 2 dimension make-up which is describing images using dots, lines and colors and other is 3 dimension which will include necessary shapes to figure. Even though there seems to be different between modern technologies and handy work, since accurate measures and graphics have to be used to make perfect character describes in the script, more investments and studies than before have to be made. Real attraction of 3 dimension make-up is building up the images and shapes using unseen abstract images having analyzing characters. It will be decided in the working process called modeling. As having distinguished this part from other make-ups as named prosthetics make-up, proposing means and measures of prosthetics make-up will actually help the others who are studying make-up.

• 한국CDE학회논문집
• /
• 제1권2호
• /
• pp.122-132
• /
• 1996

Features are generic shapes with which engineers associate certain attributes and knowledge useful in reasoning about the product. Feature-based modeling systems support additional levels of information beyond those available in geometric modelers. The objective of this study is to develop a PC level feature-based modeling system which explicitly represents dimensions of the part. The feature-based modeler retains all the benefits of traditional B-rep. solid models, and represents the dimensions at a high level of a abstraction so that dimension driven geometry can be achieved.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.114-125
• /
• 1997

This paper presents a method that automatically recognizes dimension sets from the mechanical drawings, and that classifies 6 types dimension sets according to functional purpose. In the proposed method, the object and closed-loop symbols are separated from the character-free drawings. Then object lines and interpretation lines are vectorized. And, after recognizing dimension sets(consistings of arrowhead, shape line, tail lines, extension lines, text-string, and feature control frame), we classify recognized dimension sets as horizontal, vertical, angular, diametral, radial, and leader dimension sets. Finally the proposed method converts classified dimension sets into AutoCAD data by using AutoLisp language. By using the methods of geometric modeling, the proposed method readily recognized and classifies dimension sets from complex drawings. Experimetnal results are presented, which are obtained by applying the proposed method to drawings drawn in compliance with the KS drafting standard.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.207-211
• /
• 2001

The scope has been small and the specification has been not suggested yet when the pipe house was planed by farmer in Korea. The construction has been made by the suitable agreement of builder and farmer. Also, life cycle time of the pipe house material under serviceability load is not suggested yet. This study is to consider problems of past 2-dimension modeling, to introduce new 3-dimension modeling about pipe house analysis and to know that how the structure under various loads conditions behaves. Therefore, the object is to discuss the current design and to suggest new analysis modeling of the pipe house.

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.172-182
• /
• 2006

This paper presents a method to convert 3D CAD model to an appropriate analysis model using wrap-around, smooth-out and thinning operators that have been originally developed to realize the multi-resolution modeling. Wrap-around and smooth-out operators are used to simplify 3D model, and thinning operator is to reduce the dimension of a target object with simultaneously decomposing the simplified 3D model to 1D or 2D shapes. By using the simplification and dimension-reduction operations in an appropriate way, the user can generate an analysis model that matches specific applications. The advantage of this method is that the user can create optimized analysis models of various simplification levels by selecting appropriate number of detailed features and removing them.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.392-398
• /
• 2013

As the essential techniques for the CD (Critical Dimension) measurement of the LCD pattern, there are various modules such as an optics design, auto-focus [1-4], and precise edge detection. Since the operation of image enhancement to improve the CD measurement repeatability, a ring type of the reflected lighting optics is devised. It has a simpler structure than the transmission light optics, but it delivers the same output. The edge detection is the most essential function of the CD measurements. The CD measurement is a vital inspection for LCDs [5-6] and semiconductors [7-8] to improve the production yield rate, there are numbers of techniques to measure the CD. So in this study, a new subpixel algorithm is developed through facet modeling, which complements the previous sub-pixel edge detection algorithm. Currently this CD measurement system is being used in LCD manufacturing systems for repeatability of less than 30 nm.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.189-198
• /
• 1998

Recently, monitoring of tool life is a matter of common interesting because tool life affects precision, productivity and cost in machining process. Especially flank wear has a direct effect on cutting mechanism, so the various pattern of cutting force is obtained experimentally according to variation of wear condition. By investigating cutting force signal, AR(Autoregressive) modeling and correlation dimension analysis is conducted in turning operation. In this modeling and analysis, we extract features through 6th AR model, correlation integral and normalized correlation integral. After the back-propagation model of the neural network is utilized to monitor tool life according to flank wear. As a result. a very reliable classification of tool life was obtained.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.157-162
• /
• 2013

To analyze the dynamic acceleration characteristics, it is necessary to identify the acceleration model using some methods that can represent the dynamic properties well. In this sense, fractal methods were used for the verification of characteristics of an acceleration signal. To estimate and analyze the geometry of acceleration signal, a fractal interpolation and its analysis was introduced in this paper. The chaotic nature of acceleration signal was considered in fractal modeling. In this study the fractal signal modeling has brought a focus within the scope of the fractal interpolation and fractal dimension. And a new idea of fractal dimension has been introduced and discussed considering the damping ratio and amplitude for its dynamic properties of the signal. The fractal dimension of acceleration with respect to the scaling factor using fixed data points of 1000 points was calculated and discussed. The acceleration behaviors of this results show some different characteristics. And this fractal analysis can be applied to other signal analysis of several machining such as pendulum type grinding and milling which has many dynamic properties in the signal.