• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.18-23
• /
• 2017

The shipyard quay process struggles to control workers and maintain a secure working environment because of the presence of at least 1,000 people. Therefore, safety accidents such as an explosion or a fire are likely to occur. With the recent increase in safety accidents at shipyards, the requirements for safety and process monitoring have been strengthened. Major shipyards are conducting researchto monitor the process in real time and to detect the work environment for safety. In this paper, we propose a safe and accurate evacuation route based on the information of the dangerous area and the user's location based on a mobile application to reduce the casualty accidents in the presence of many personnel in a concentrated area. To do this, we analyze the trend of the fire escape system on the ground building, compare various algorithms for escape route calculation, select appropriate algorithms for this study, and perform programming. A basic experiment was conducted to confirm the results. The proposed method is expected to be used in large ship construction sites, passenger ships and large public facilities to reduce accidents in the case of a safety accident.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2017

Recently, one of the natural disasters, landslide is causing huge damage to people and properties. In order to minimize the damage caused by continuous landslide, a scientific management system is needed for technologies related to measurement and monitoring system. This study aims to establish a management system for landslide damage by prediction of slope failure. Ground behavior was predicted by surface ground deformation in case of slope failure, and the change in ground displacement was observed as slope surface. As a result, during the slope failure, the ground deformation has the collapse section, the after collapse precursor section, the acceleration section and the burst acceleration section. In all cases, increase in displacement with time was observed as a slope failure, and it is very important event of measurement and maintenance of risky slope. In the future, it can be used as basic data of slope management standard through continuous research. And it can contribute to reduction of landslide damage and activation of measurement industry.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.3
• /
• pp.99-111
• /
• 2017

The purpose of this study is to provide a design and operation technical guideline for meeting the appropriate design criteria to bio-gasification facilities treating organic wastes. Based on the results obtained during the field surveys, the overall design and operation guidelines for bio-gasification facilities, monitoring items, cycle and commissioning period were presented. According to the flow of anaerobic digestion process, Various design factors for bio-gasification facilities were proposed in this study. When designing the initial anaerobic digestion capacity, 10 ~ 30% of the treatment capacity was applied considering the discharge characteristics by the incoming organic wastes. At the import storage hopper process, limit concentration of transporting organic wastes was limited to TS 10 % or less, and limit concentration of inhibiting factor was suggested in operation of anaerobic digester. In addition, organic loading rate (OLR) was shown as $1.5{\sim}4.0kgVS_{in}/(m^3{\cdot}day)$ for the combined bio-gasification facilities of animal manure and food wastes. Desulfurization and dehumidification methods of biogas from anaerobic digestor and proper periods of liquifization tank were suggested in design guideline. It is recommended that the operating parameters of the biogasification facilities to be maintained at pH (acid fermentation tank 4.5~6.5, methane fermentation tank 6.0~8.0), temperature variation range within $2^{\circ}C$, management of volatile fatty acid and ammonia concentration less than 3,000 mg/L, respectively.

• Korean Journal of Environmental Biology
• /
• v.35 no.3
• /
• pp.361-372
• /
• 2017

This study described the spatial distribution of dinoflagellate cyst assemblages in the Ulsan Coastal Waters (UCW). Surface sediment samples from 15 stations revealed the occurrence of 33 species involving the Groups Protoperidinioid (51.5%), Gonyaulacoid (30.4%), Calciodineloid (9.1%), Gymnodinioid (3.0%), Diplopsallid (3.0%) and Tuberculodinioid (3.0%). The recorded cyst abundance in the UCW recorded was low ($260{\sim}1,680cysts\;g-dry^{-1}$) compared to Korean coastal waters. The abundance of heterotrophic cysts is higher in the Ulsan harbour and northwestern parts of UCW with eutrophic areas, however autotrophic species are more prevalent in the southern parts with open sea environments. The dinoflagellate cyst assemblages in the UCW were characterized by the dominance of Gonyaulax scrippsae, Protoperidinium sp. (Brigantedinium sp.), and Gonyaulax spinifera complex. The advent of the toxic dinoflagellate, Pyrodinium bahamense var. bahamense was recorded for the first time in the East-south sea of Korea. Therefore, as a result of ongoing monitoring and management for new toxic dinoflegallates from tropical or subtropical regions, analysis of dinoflagellate cyst assemblages in the UCW has been deemed necessary.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.251-257
• /
• 2018

Objective : The aim of this study was to investigate clinical and radiological outcomes of patients who underwent posterior vertebral column resection (PVCR) by a single neurosurgeon in a single institution. Methods : Thirty-four consecutive patients with severe spinal deformities who underwent PVCR between 2010 and 2016 were enrolled. The radiographic measurements included a kyphotic angle of PVCR levels (VCR angle), sagittal vertical axis (SVA), thoracic kyphosis, lumbar lordosis (LL), and spinopelvic parameters. The data of surgical time, estimated blood loss, duration of hospital stay, complications, intraoperative neurophysiologic monitoring, and the Scoliosis Research Society (SRS)-22 questionnaire were collected using a retrospective review of medical records. Results : The VCR angle, LL, and SVA values were significantly corrected after surgery. The VCR and LL angle were changed from the average of $38.4{\pm}32.1^{\circ}$ and $-22.1{\pm}39.1^{\circ}$ to $-1.7{\pm}29.4^{\circ}$ (p<0.001) and $-46.3{\pm}23.8^{\circ}$ (p=0.001), respectively. The SVA was significantly reduced from $103.6{\pm}88.5mm$ to $22.0{\pm}46.3mm$ (p=0.001). The clinical results using SRS-22 survey improved from $2.6{\pm}0.9$ to $3.4{\pm}0.8$ (p=0.033). There were no death and permanent neurological deficits after PVCR. However, complications occurred in 19 (55.9%) patients. Those patients experienced a total of 31 complications during- and after surgery. Sixteen reoperations were performed in twelve (35.3%) patients. The incidence of transient neurological deterioration was 5.9% (two out of 34 patients). Conclusion : Severe spinal deformities can be effectively corrected by PVCR. However, the PVCR technique should be utilized limitedly because surgery-related serious complications are relatively common.

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.46-56
• /
• 2018

A mcyB-specific Ultra-Rapid quantitative PCR was developed for the quantitative detection of Microcystis aeruginosa, which is often a dominant species in green tide. McyB-specific UR-qPCR was optimized under extremely short times of each step in thermal cycles, based on the specific primers deduced from the mcyB in microcystin synthetase of M. aeruginosa. The M. aeruginosa strain KG07 was used as a standard for quantification, after the microscopic counting and calculation by mcyB-specific UR-qPCR. The water samples from the river water with the Microcystis outbreak were also measured by using both methods. The $1.0{\times}10^8$ molecules of mcyB-specific DNA was recognized inner 4 minutes after beginning of UR-qPCR, while $1.0{\times}10^4$ molecules of mcyB-specific templates was detected inner 7 minutes with quantitative manner. From the range of $1.0{\times}10^2$ to $1.0{\times}10^8$ initial molecules, quantification was well established based on $C_T$ using mcyB-specific UR-qPCR (Regression coefficiency, $R^2=0.9977$). Between the numbers of M. aeruginosa cell counting under microscope and calculated numbers using mcyB-specific UR-qPCR, some differences were often found. The reasons for these differences were discussed; therefore, easy compensation method was proposed that was dependent on the numbers of the cell counting. Additionally, to easily extract the genomic DNA (gDNA) from the samples, a freeze-fracturing of water-sample using liquid nitrogen was tested, by excluding the conventional gDNA extraction method. It was also verified that there were no significant differences using the UR-qPCR with both gDNAs. In conclusion, the mcyB-specific UR-qPCR that we proposed would be expected to be a useful tool for rapid quantification and easy monitoring of M. aeruginosa in environmental water.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.132-139
• /
• 2017

Endocrine disrupting chemicals (EDCs) interfere with endocrine system in organisms, and have different mode of actions compared to conventional chemicals. Therefore, EDCs specific ecotoxicity tests and assessments have been globally developed by some organizations such as OECD, ASTM, and USEPA. In Korea, researches on EDCs and monitoring of EDCs in domestic environments were also continued. However, Korean ecotoxicity test guidelines for EDCs are not suggested till date. The purpose of this study is to review and analyze international ecotoxicity test guidelines for EDCs and the compare ecotoxicity methods and toxicity endpoints among standard test guidelines. We found that there are very limited EDCs specific soil ecotoxicity test guidelines (only in ASTM) compared to aquatic ecotoxicity test guidelines. Currently, fish, amphibian, waterflea, copepoda, earthworm, white worm, springtail, nematode, mite, and midge are suggested as standard ecotoxicity test species for EDCs. Reproduction, hormones, growth, vitellogenin, sex retio and development were proposed as endpoints for EDCs ecotoxicity. This study provided the comparison of EDCs specific ecotoxicity methods and endpoints between standard test guidelines, and suggested the further research to develop the method for assesseing ecotoxicity of EDCs.

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.363-377
• /
• 2016

This study was investigated the pollutant load, contamination properties, pollution condition of the fine parts of tributary, the influence of Nakdong river watershed and etc. in the tributaries. The contaminated tributaries were that among the Kumho and Nam river or were too far from site of water quality monitoring stations, regularly. As a result, the water quality level was almost similar between Nam and Kumho River, except for certain parameter including TN(Total Nitrogen), Chl-a(Chlorophyll-a) and SS(Suspended Solid) in which Kumho river were 20~120%. The point discharge load(kg/day) and load density ($kg/day/km^2$) of tributaries were different the pollution level according to the flow-rate ($m^3/sec$) and stream influence area($km^2$), and the difference of these was observed highly at Nam river. Specific contamination investigation of tributaries in Nam and Kumho river watershed was conducted from two to nine points of the fine parts of tributaries depending on the confluence sites and shapes. This result observed high at the Dalseocheon and Uriyeongcheon, respectively. Beside, the pollutant load contribution rate of Nakdong watershed was high about 10% at the Dalseocheon and Uiryeongcheon. This was due to the differences of the environments about the industrial complex, metropolis residence property, agricultural cultivation, livestock pen and the downstream of non-point source.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.268-268
• /
• 2016

Chemical sensors have attracted much attention due to their various applications such as agriculture product, cosmetic and pharmaceutical components and clinical control. A conventional chemical and biological sensor is consists of fluorescent dye, optical light sources, and photodetector to quantify the extent of concentration. Such complicated system leads to rising cost and slow response time. Until now, the most contemporary thin film transistors (TFTs) are used in the field of flat panel display technology for switching device. Some papers have reported that an interesting alternative to flat panel display technology is chemical sensor technology. Recent advances in chemical detection study for using TFTs, benefits from overwhelming progress made in organic thin film transistors (OTFTs) electronic, have been studied alternative to current optical detection system. However numerous problems still remain especially the long-term stability and lack of reliability. On the other hand, the utilization of metal oxide transistor technology in chemical sensors is substantially promising owing to many advantages such as outstanding electrical performance, flexible device, and transparency. The top-gate structure transistor indicated long-term atmosphere stability and reliability because insulator layer is deposited on the top of semiconductor layer, as an effective mechanical and chemical protection. We report on the fabrication of InGaZnO TFTs with silver nanowire as the top gate electrode for the aim of chemical materials detection by monitoring change of electrical properties. We demonstrated that the improved sensitivity characteristics are related to the employment of a unique combination of nano materials. The silver nanowire top-gate InGaZnO TFTs used in this study features the following advantages: i) high sensitivity, ii) long-term stability in atmosphere and buffer solution iii) no necessary additional electrode and iv) simple fabrication process by spray.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.9
• /
• pp.535-540
• /
• 2017

The changes in the electrical characteristics of CMOS ICs due to coupling with a narrow-band electromagnetic wave were analyzed in this study. A magnetron (3 kW, 2.45 GHz) was used as the narrow-band electromagnetic source. The DUT was a CMOS logic IC and the gate output was in the ON state. The malfunction of the ICs was confirmed by monitoring the variation of the gate output voltage. It was observed that malfunction (self-reset) and destruction of the ICs occurred as the electric field increased. To confirm the variation of electrical characteristics of the ICs due to the narrow-band electromagnetic wave, the pin-to-pin resistances (Vcc-GND, Vcc-Input1, Input1-GND) and input capacitance of the ICs were measured. The pin-to-pin resistances and input capacitance of the ICs before exposure to the narrow-band electromagnetic waves were $8.57M{\Omega}$ (Vcc-GND), $14.14M{\Omega}$ (Vcc-Input1), $18.24M{\Omega}$ (Input1-GND), and 5 pF (input capacitance). The ICs exposed to narrow-band electromagnetic waves showed mostly similar values, but some error values were observed, such as $2.5{\Omega}$, $50M{\Omega}$, or 71 pF. This is attributed to the breakdown of the pn junction when latch-up in CMOS occurred. In order to confirm surface damage of the ICs, the epoxy molding compound was removed and then studied with an optical microscope. In general, there was severe deterioration in the PCB trace. It is considered that the current density of the trace increased due to the electromagnetic wave, resulting in the deterioration of the trace. The results of this study can be applied as basic data for the analysis of the effect of narrow-band high-power electromagnetic waves on ICs.