• Journal of Pharmaceutical Investigation
• /
• v.29 no.4
• /
• pp.287-293
• /
• 1999

Transport study of horseradish peroxidase and transferrin-horseradish peroxidase conjugate was performed using an in vitro Caco-2 cell cultured monolayer grown on a polycarbonate membrane of $Transwell^{\circledR}$, Horseradish peroxidase was not transported across Caco-2 cell monolayer. Transferrin-horseradish peroxidase conjugate was transported through Caco-2 cell monolayer. The apparent membrane permeability coefficient $(P_{app})$ of transferrin horseradish peroxidase conjugate was $6.54{\times}10^{-7}\;cm/sec$. The $P_{app}$ value of transferrin-horseradish peroxidase conjugate across Caco-2 cell monolayer was increased to $11.9{\times}10^{-7}\;cm/sec$ in the presence of $50\;{mu}g/ml$ brefeldin-A. These results suggest the transferrin receptor mediated transcytosis of transferrin-horseradish peroxidase conjugate across Caco-2 cell monolayer.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.383-389
• /
• 1995

A new approach for the measurement of the surface coverages of monomolecular films fabricated by spontaneous adsorption of thiol compounds on gold is described. It is based on the mass change measurement with EQCM for the reductive electrochemical desorption of thiol in aqueous KOH solution. The results were compared with that of charge calculation during electrochemical desorption. The surface coverage value for eicosanethiol agrees with that obtained by charge calculation of electrochemical reduction as well as that expected from a geometrical model of the compact monolayer.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.84-87
• /
• 2020

The properties of ultra-thin two-dimensional (2D) organic ferroelectric Langmuir-Blodgett (LB) films of the poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] were investigated to find possible applicability in flexible and wearable electronics applications. In the C-V characteristics of the MFM capacitor of 2-monolayer of 5 nm films, a butterfly hysteresis curve due to the ferroelectricity of P(VDF-TrFE) was confirmed. Typical residual polarization value was measured at 2μC/㎠. When the MFM capacitor with ultra-thin ferroelectric film was measured by applying a 10 Hz bipolar pulse, it was shown that 65% of the initial polarization value in 105 cycles deteriorated the polarization. The leakage current density of the 2-monolayer film was maintained at about 5 × 10-8 A/㎠ for the case at a 5MV/cm electric field. The resistivity of the 2-monolayer film in the case at an electric field at 5 MV/cm was more than 2.35 × 1013 Ω·cm.

• Journal of the Korean Magnetics Society
• /
• v.19 no.5
• /
• pp.161-164
• /
• 2009

The effect of periodic vacancies to the magnetism of the Fe monolayer was investigated by calculating the electronic structures using the full-potential linearized augmented plane wave method within the GGA approximation. We considered four types of vacancies, point defect, I type, + type, and H type which are consisted of one, three, five and seven vacant sites, respectively. We found that the Fe atoms nearest to the vacancy have the largest magnetic moment in each system, and the value of magnetic moment of the atom was increased as the number of vacancy site is increased. The value of the largest magnetic moment in the systems of point defect, I type, + type, and H type are 3.08, 3.09, 3.15, and 3.30 bohr magnetons, respectively.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.56-63
• /
• 2003

Micro/nano adhesion and friction properties of mixed self-assembled monolayer (SAM) with different chain length for MEMS application were experimentally studied. Many kinds of SAM having different spacer chains(C6, C10 and C18) and their mixtures (1:1) were deposited onto Si-wafer, where the deposited SAM resulted in the hydrophobic nature. The adhesion and friction properties between tip and SAM surfaces under nano scale applied load were measured using an atomic force microscope (AFM) and micro scale applied load were measured using ball-on-flat type micro-tribotester. Surface roughness and water wetting angles were measured with SPM (scanning probe microscope) and contact anglemeter. Results showed that wetting angles of mixed SAMs showed the similar value of pure SAMs. The coating surface morphology was increased as mixing of SAM. Nano adhesion and nano friction decreased as increasing of the spacer chain length and mixing of SAM. Micro friction was decreased as increasing of the spacer chain, but micro friction of mixed SAM showed the value between pure SAMs. Nano adhesion and friction mechanism of mixed SAM was proposed in a view of stiffness of spacer chain modified chemically and topographically.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.38-42
• /
• 1996

The pressure-area isotherm of monolayer at the air-water interface were obtained and the LB films were fabricated onto a quartz slides and quartz crystal by conventional Langmuir-Blodggett(LB) method. The UV absorption spectra of Langmuir-Blodggett(LB) film on quartz slides and spectrum of monolayer formed on quartz crystal have been measured. The photoisomerization of the long-chain fatty avid containing azobenzene were obtained by the application of UV and visible light. The reversibility of photoisomerization were more clear difference when the number of C$\_$n/ increased. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of C$\_$n/ increased, A surface pressure of 20mN/m was obtained as a proper one for a film deposition. The photoisomerization at LB films were also obtained by application of UV and visible light. So the LB film of long-chain fatty acid containing azobenzene has possibility to being applies to functional molecular devices such as photomemory and light switching.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.90-93
• /
• 2002

In the surface pressure-area isotherms of mixed monolayers, mixtures containing as much as 30 mol% of AA form stable condensed monolayer while the monolayer without AA is in the expanded state because PVK take on 3D collapsed. All of the mixed monolayers with 0, 10, 20 and 30 mol% of AA could be readily transferred onto ITO substrate at 16, 17, 24 and 26 mN/m, respectively. The monolayer containing 30 mol% of AA, however, showed a roughness value of 28A and became homogeneous decreasing with the phase separation. We fabricated organic EL device of ITO/CuPc/MEL/BBOT/iLiF/Al using mixed monolayer of 13, 19 and 25 layer deposited by LB method as a emitting layer. In the voltage-current characteristics of EL device, current density was much smaller than that of the spin-coated devices. It may due to the large contact resistance existed at the interface of LB layer/organic layer inhibit carrier injection to the emitting layer. EL spectra of device showed peaks at 450. 470, 505, 555 and 650 nm and the white light emission indicate the CIE coordinate x=0.306, y=0.353.

• Korean Journal of Food Science and Technology
• /
• v.16 no.4
• /
• pp.437-442
• /
• 1984

The color changes and sorption characteristics of dried whole red pepper stored at various relative humidity and temperature were studied. Dried whole red pepper was browned at relative humidity above 67%, and was molded at relative humidity above 84%, and was decolorated at relative humidity below 32%. Therefore, about 50% RH condition was suitable for the preservation of dried whole red pepper and the safe moisture content levels for storge to prevent decolorization were ranging from 15.65% to 19.62% dry basis (DB) with varying temperatures. The moisture contents of monolayer value for the dried whole red pepper were ranging from 7.52% to 9.23% (DB) with varying temperatures. The third order regression equation for the equilibrium moisture content prediction with relative humidity was determined.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.817-823
• /
• 1990

The sorption characteristics of red pepper powders in terms of mixing ratio of seeds to red pepper powders were investigated at various relative humidities and temperatures as storage conditions. At lower relative humidity below 43% RH, the sorption equilibrium was easily reached regardless of mixing ratio, whereas at higher relative humidity above 75%, the powders gained moisture rapidly, resulting in the color change to brown. At extremely lower RH below 33%, decoloration occurred in red pepper powder. The moisture contents of monolayer value for red pepper powders without seeds were ranging from 5.88% to 7.35% inversely proportional to the temperature. The moisture contents of monolayer value decreased with increase of mixing ratio of seeds.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.10
• /
• pp.1695-1700
• /
• 2008

An immunosensor based on surface plasmon resonance (SPR) with enhanced performance was developed through a mixed self-assembled monolayer. A mixture of 16-mercaptohexadecanic acid (16-MHA) and 1-undecanethiol with various molar ratios was self-assembled on gold (Au) surface and the carboxylic acid groups of 16-MHA were then coordinated to Zn ions by exposing the substrate to an ethanolic solution of $Zn(NO_3)_2\cdot 6H_2O$. The antibody was immobilized on the SPR surface by exposing the functionalized substrate to the desired solution of antibody in phosphate-buffered saline (PBS) molecules. The film formation in series was confirmed by SPR and atomic force microscopy (AFM). The functionalized surface was applied to develop an SPR immunosensor for detecting human serum albumin (HSA) and the estimated detection limit (DL) was 4.27 nM. The limit value concentration can be well measured between ill and healthy conditions.