• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.37-52
• /
• 2004

본 논문에서는 DS-CDMA 기반의 W-CDMA 상향링크 시스템에서 타사용자 간섭 및 다중 경로 간섭 신호를 효율적으로 제거할 수 있는 Multistage Adaptive Partial PIC를 설계하고 모의실험을 통해 그 성능을 분석하였다. 적응 방식은 연판정기의 가중치를 수신 신호에 따라 제어하는 방식이기 때문에 연판정의 효과를 극대화시킬 수 있고 더욱 정밀한 간섭 신호의 재생을 통해 검출 오류 포화 현상을 해결하여 우수한 성능을 얻을 수 있다. 결과적으로 Multistage Adaptive Partial PIC는 시변 특성의 다양한 채널환경에서 단순한 최적화 방법을 제공하고 기존 Multistage Partial PIC보다 적은 단계에서 최적성능을 보였다. 줄어든 단계이외에도 레이크 수신기의 출력단에서 간섭 신호를 제거하는 방식으로 설계하여 시스템의 복잡도를 대폭 줄였다. Multistage Adaptive Partial PIC를 사용함으로써 고속의 데이터 전송에서도 간섭 신호의 정밀한 재생과 효율적인 제거를 통해 초기 검출 오류로 인한 검출 오류 포화 현상을 해결하고 성능을 향상시킬 수 있음을 제시하였다.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.657-668
• /
• 2020

A novel multistage approach is developed for structural model updating based on sensitivity ranking of the selected updating parameters. Modal energy-based sensitivities are formulated, and maximum-normalized indices are designed for sensitivity ranking. Based on the ranking strategy, a multistage approach is proposed, where these parameters to be corrected with similar sensitivity levels are updated simultaneously at the same stage, and the complete procedure continues sequentially at several stages, from large to small, according to the predefined levels of the updating parameters. At every single stage, a previously developed cross model cross mode (CMCM) method is used for structural model updating. The effectiveness and robustness of the multistage approach are investigated by implementing it on an offshore structure, and the performances are compared with non-multistage approach using numerical and experimental vibration information. These results demonstrate that the multistage approach is more effective for structural model updating of offshore platform structures even with limited information and measured noise. These findings serve as a preliminary strategy for structural model updating of an offshore platform in service.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.643-653
• /
• 2008

Application of the bootstrap to problems in multistage inference procedures are discussed in normal and other related models. After a general introduction to these procedures, here we explore in multistage fixed precision inference in models. We present numerical comparisons of these procedures based on bootstrap critical points for small and moderate sample sizes obtained via extensive sets of simulated experiments. It is expected that the procedure based on bootstrap leads to better results.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.112-115
• /
• 2008

The multistage wavelength division multiplexed passive optical network (WDM-PON) with multiple remote nodes (RN) can accommodate widely spread subscribers efficiently and it increases the channel usage. We implemented a multistage RN using band add-drop filters and it was applied to a wavelength-locked Fabry-Petor laser diode based gigabit WDM-PON.

• 대한산업공학회지
• /
• 제38권4호
• /
• pp.262-275
• /
• 2012

This paper develops a multistage scheduling algorithm for the module operation of the LCD(Liquid Crystal Display) production systems and tests the efficiency of the proposed algorithm. The module operation is a multistage form composed of multiple sub operations of processes, and each stage is consists of multiple lines with the same kinds of machines. This paper presents a mathematical modeling reflecting the constraints of the LCD module operation and develops a multistage scheduling algorithm based on tabu search metaheuristic approach. For this purpose, an production order is assigned to a line of the sub operations and a sequence of the assigned order is rearranged to draw an efficient schedule. Simulation experiments test performance measures and show the efficiency of the proposed algorithm.

• 진공이야기
• /
• 제2권4호
• /
• pp.39-46
• /
• 2015

After stepping into a new field of vacuum 30 years ago, our company has grown up steadily as a specialized vacuum industry, and now we can provide vacuum devices covering most of the pressure range. We are planning to put out high level dry pump like a multistage Roots pump on the market in the near future. Procedures of technology development for designing, fabricating, and testing the multistage Roots pump of 600 L/min class will be briefly reported. Core items of the technical development on the multistage Roots pump are as follows; elaborated profile design of 3-lobe rotors using an involute curve, optimization of rotor dimensions, especially for clearances and rotor width, considering the pumping speed, compression ratio and heat load, and establishment of a standardized test system. At present, the multistage Roots pump is about to come into commercialization.

• 한국산업정보학회논문지
• /
• 제19권4호
• /
• pp.87-104
• /
• 2014

본 연구에서는 지역적으로 집중화된 역물류네트워크(Regionally centralized multistage reverse logistics network: cmRL)와 지역적으로 분산회된 역물류네트워크(Regionally decentralized multistage reverse logistics network: dmRL)를 제안하고 있다. cmRL과 dmRL 각각은 고려되는 영역 전체와 지역적으로 분산된 세부영역에서의 RL 네트워크로 구성된다. 이들은 혼합정수계획법(Mixed integer programming: MIP) 모델로 공식화되며, 유전알고리즘(Genetic algorithm: GA)을 통해 해를 구하게 된다. 사례연구에서는 두 가지 형태의 RL네트워크를 제시하며 다양한 수행도 척도를 사용하여 cmRL과 dmRL의 효율성을 비교분석하였다. 분석결과 cmRL이 dmRL 보다 더 우수한 수행도를 나타내었다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.107-118
• /
• 2016

This paper focuses on the single stage and multistage performance characteristics of centrifugal mixed flow submersible borewell pump. This study reveals that the performance of single stage pump is higher than that of multistage pumps. The head, input power and efficiency of single stage pump are higher than the per stage head, per stage input power and efficiency of multistage pumps. This study is divided into three parts. In the first part, five prototype pumps were made in single stage and multistage construction and the performance tests were conducted. In the second part, numerical validation has been done for different turbulence models and grid sizes. k-Omega SST model has been selected for the performance simulation and was validated with the performance of the test pump with static pressure tappings. In the third part, single and three stage pump performance were simulated numerically and compared with experimental results. The detailed analysis of pressure and velocity distributions reveals the difference in performance of single and three stage pump, due to non-uniform flow and difference in averaged flow velocities at the subsequent impeller inlets except the 1st stage impeller inlet.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.127-133
• /
• 2001

In this paper, the preconditioned multistage time stepping methods which are popular multigrid smoothers is studied for the compressible flow calculations. Fourier analysis on the local time stepping and block-Jacobi preconditioned residual operators is performed using the linearized 2-D Navier-Stokes equations. It fumed out that block-Jacobi preconditioner has better performance in eigenvalue clustering. They are implemented in the 2-D compressible Euler and Wavier-Stokes calculations with multigrid methods to verify that the block-Jacobi preconditioned multistage time stepping shows better performance in convergence acceleration.

• 전자공학회논문지B
• /
• 제33B권12호
• /
• pp.84-94
• /
• 1996

In this work, a fuzzy petri net model for modeling a general form of fuzzy production system which consists of chaining fuzzy production rules and so requires multistage reasoning process is presented. For the obtained fuzzy petri net model, the net will be transformed into some matrices, and also be systematically led to an algebraic form of a state equation. Since it is fond that the approximate reasoning process in fuzzy systems corresponds to the dynamic behavior of the fuzzy petri net, it is further shown that the multistage reasoning process can be carried out by executing the state equation.