• Applied Science and Convergence Technology
• /
• 제27권2호
• /
• pp.38-41
• /
• 2018

We demonstrate the growth of a sheet-like ZnO membrane on ZnO nano rod layers. The growth process is composed of 3 steps of ZnO seed formation, ZnO nano rod growth and sheet-like ZnO membrane formation on those nano rods. To confirm the fundamental growth mechanism, the lattice structures of each step were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM) measurement. Analysis of the relation between the texture coefficient and the surface shape of the ZnO membrane on the ZnO nano rods shows that the surface morphology of ZnO nano structures can be controlled using the temperature of the growing solution and the concentration of the chemical solution.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.609-614
• /
• 2020

3 mol% yttria-doped stabilized zirconia (3YSZ) is synthesized by a solvothermal process, and its characteristics are investigated using various methods. Also, the dispersibility of synthesized 3YSZ nanoparticles is observed with the species of surface modifier. The 3YSZ nano sol prepared with an optimum condition is employed in prism coating and its properties are evaluated. The synthesized 3YSZ nanoparticles show a globular shape with about 10 to 20 nm crystallite size. The mixed phases with the nano sol show a high specific surface of 178 ㎡/g. The prism sheet coated with the 3YSZ nano sol present an excellent refractive index, transmittance, and luminance; refractive index is 1.603, transmittance is 90.2 %, and luminance of coating film is improved by 5.9 % compared to that of the film without 3YSZ nano sol. It is verified that the surface modified 3YSZ is suitable as the prism sheet for optical displays.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.413-418
• /
• 2021

높은 유효 표면적을 갖는 나노소재는 고감도 가스센서와 바이오센서 및 높은 촉매효율을 구현하는 기능성 소재로 활용되고 있다. 본 연구에서는 Ti Sheet와 Urea를 이용하는 Chemical Bath Deposition(CBD) 공정으로 기판에 수직한 방향으로 성장하는, 높은 유효 표면적을 갖는 3차원 나노벽 유사구조의 Titanate Sheet를 합성하였다. CBD 공정에서 합성온도 및 합성시간 등을 조절하여 3차원 나노벽 유사구조의 최적 합성조건을 탐색하였다. 합성된 3차원 나노벽유사구조의 Ammonium Titanate를 공기 중에서의 열처리 공정을 통하여 다양한 용도로 활용되는 TiO2 3차원 나노벽유사구조로 변환시켰다. 연구결과 3차원 나노벽 유사구조의 Ammonium Titanate가 균일하게 성장되는 CBD 합성온도는 90 ℃이었고, 550 ℃ 이상에서 3시간 열처리하였을 경우, 3차원 나노벽 유사구조의 TiO2 상으로 변환되었다. 특히 700 ℃에서 열처리하였을 경우, Rutile 상이 우세한 TiO2 3차원 나노벽 유사구조를 얻을 수 있었다. 하지만 700 ℃의 열처리에서는 3차원 나노벽의 가장자리가 손상되는 현상이 발생하였다.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.186-194
• /
• 2005

This study was designed to investigate the mechanical properties of the coating layer on electronic galvanized sheet steel as a part of the ongoing research on the coated steel. Those properties were determined using nano-indentation, the finite element method, and artificial neural networks. First and foremost, the load-displacement curve (the loading-unloading curve) of coatings was derived from a nano-indentation test by CSM (continuous stiffness measurement) and was used to measure the elastic modulus and hardness of the coating layer. The properties derived were applied in FE simulations of a nano-indentation test, and the analytical results were compared with the experimental result. A numerical model for FE simulations was established for the coating layer and the substrate separately. Finally, to determine the mechanical properties of the coating, such as the stress-strain curve, functional equations of loading and unloading curves were introduced and computed using the neural networks method. The results show errors within $5\%$ in comparison with the load-displacement measured by a nano-indentation test.

• 소성∙가공
• /
• 제20권1호
• /
• pp.23-28
• /
• 2011

For the fabrication of nano patterned products manufacturing a nano patterned mold is needed in advance. The nano patterned stamper was fabricated by electroforming the AAO master with nickel. The surface of nickel-plated stamper had nano-patterned holes with the diameter of 73 nm and the depth of 83 nm. Hot embossing was used for forming P3HT sheet and the process factors of hot embossing were closer as pressure, temperature and time. In the present paper hot embossing experiments were performed to find the main process conditions to affect the replication ratio of nano patterns on surface of P3HT sheet. As a result, main contributing factors for the replication ratio of hot embossed pattern could be sequentially enumerated as pressure, temperature and time.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.13-19
• /
• 2011

목적: 본 연구는 국외에서 판매중인 셀룰로오스 아세테이트 안경테용 판재(수입 CA판재, overseas company's cellulose acetate glasses frame sheet)의 특성을 평가하고 안경테용 CA 판재로서 적합한 공업용 셀룰로오스 아세테이트 레진(공업용 CA레진, industrial cellulose acetate resin)을 선정하여 그 소재의 최적 용융 압출 조건을 도출하는 데 목적이 있다. 방법: 수입 CA판재의 특성을 고찰하기 위해 $^1H$-NMR, GPC, TGA 분석을 실시하고, 공업용 CA레진의 최적 배합 조건 및 용융 압출 조건을 도출한다. 또한 hot press에 의해 제조 된 3개국의 수입 CA판재와 공업용 CA레진 성형체의 물성을 비교 평가를 실시하였다. 결과: 수입 CA판재의 특성 분석 결과, virgin CA를 가소화시키기 위해 사용된 가소제는 diethyl phthalate이며 가소제의 함량은 30 wt% 내외임을 확인하였다. 용융 압출 시험 결과, 압출온도는 190~200${^{\circ}C}$에서 공업용 CA레진의 충분한 용융거동 및 압출성을 보였으며 성형체 또한 안경테용 물성을 만족하는 수준인 2.3 kgf/$mm^2$임을 확인하였다. 결론: 30 wt%의 가소제 함량을 가진 공업용 CA레진의 경우, 중국의 CA판재를 대체하여 안경테용 셀룰로오스 아세테이트 판재 제조에 적합한 소재로 판단된다.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.696-703
• /
• 2005

In the modern days, a galvannealed sheet steel (GA) instead of a cold rolled steel sheet has been widely used as an alternative to extend the life of automotive body. Accordingly, the mechanical properties of GA for automobiles were taken into account and studied by examining their variation with annealing temperature. To clarify the effect of surface features on the mechanical and frictional properties of GA, the several tests such as nanoindentation, Vickers hardness and nano scratch test were executed. The frictional characteristics of coating layers of GA were examined through nano scratch test in this study. The friction coefficient of coating layers on the surface was obtained from the nano scratch. The variation of friction coefficient versus velocity and pressure was taken into consideration in this paper. Hardness and elastic modulus of coating layer were increased as increasing annealing temperature.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.113-117
• /
• 2005

In the modern days, a galvannealed sheet steel (GA) instead of a cold rolled steel sheet has been widely used as an alternative to extend the life of automotive body. Accordingly, the mechanical properties of GA for automobiles were taken into account and studied by comparing with the temperature variation on annealing in this study. To clarify the effect of surface features in the mechanical and frictional properties of GA, the several tests such as nanoindentation, victors hardness and nano scratch test were executed. The developed neural networks apply also to obtain reliable mechanical properties of the thin films. Load-displacement curve was computed by the analysis procedure and compared with experimental results. The frictional characteristics of coating layers in GA were verified though nano scratch test in this study. The friction coefficient of coating layers on the surface was obtained from the nano scratch. The variation of friction coefficient versus velocity and pressure was taken into consideration in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.387-390
• /
• 2006

The protective layer of AC-PDP was fabricated by laminating an MgO green sheet. The MgO green sheet was made by coating MgO solution composed of solvent, dispersant, binder, and MgO nano-powder. The MgO solution was coated by the die casting method on the base film. We fabricated three kinds of MgO green sheets of which thicknesses were 20, 28, and $40\;{\mu}m$, respectively. The MgO nano-powder showed lower CL intensity and ${\gamma}i$ than the e-beam MgO. The MgO green sheet applied panels showed low luminance and current density. The efficiency was almost same as the conventional e-beam MgO panel.

• 한국분말재료학회지
• /
• 제15권4호
• /
• pp.292-296
• /
• 2008

The electromagnetic (EM) wave absorption properties of the $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline powder mixed with 5 to 20 vol% of Ni-Zn ferrites has been investigated in a frequency range from 100MHz to 10GHz. Amorphous ribbons prepared by a planar flow casting process were pulverized and milled after annealing at 425 for 1 hour. The powder was mixed with a ferrite powder at various volume ratios to tape-cast into a 1.0mm thick sheet. Results showed that the EM wave absorption sheet with Ni-Zn ferrite powder reduced complex permittivity due to low dielectric constant of ferrite compared with nanocrystalline powder, while that with 5 vol% of ferrite showed relatively higher imaginary part of permeability. The sheet mixed with 5 vol% ferrite powder showed the best electromagnetic wave absorption properties at high frequency ranges, which resulted from the increased imaginary part of permeability due to reduced eddy current.