• Elastomers and Composites
• /
• 제55권4호
• /
• pp.321-328
• /
• 2020

Zinc nitrate hexahydrate (Zn(NO3)2·6H2O) and sodium hydroxide (NaOH) were dissolved in distilled water and stirred for 30 min. The resulting solution was sonicated by an ultrasonic wave for 45 min. This solution was washed with distilled water and ethanol after centrifugation; next, it was placed in an electric furnace at 200℃ for 1 h under the flow of Ar gas to obtain zinc oxide nanoparticle. A zinc oxide nanoparticle-(C60) fullerene nanowhisker composite was synthesized using the zinc oxide nanoparticle solution, C60-saturated toluene, and isopropyl alcohol via the liquid-liquid interfacial precipitation method. The zinc oxide nanoparticle and zinc oxide nanoparticle-(C60) fullerene nanowhisker composite were characterized using X-ray diffraction, scanning electron microscopy, and Raman spectroscopy, and they were used for the catalytic degradation of methyl orange (MO) under ultraviolet (at 254 and 365 nm) and ultrasonic irradiation. In addition, the catalytic degradation of MO over the zinc oxide nanoparticle and zinc oxide nanoparticle-(C60) fullerene nanowhisker composite was evaluated using ultraviolet-visible spectroscopy.

• 한국습지학회지
• /
• 제20권3호
• /
• pp.272-280
• /
• 2018

기존의 독성평가는 생물의 생존가능성에 영향을 줄 수 있는 이상행동반응에 대한 평가를 거의 하지 않았다. 따라서 본 연구에서는 행동학적 이해를 바탕으로 양서류 유생들의 생존가능성과 직결되는 포식자회피반응 행동을 이용하여 fullerene nanowhisker(FNW)와 nanowhisker-silver nanoparticle composites(FNW-Ag복합체)의 독성을 평가해 보았다. 우리는 나노물질에 노출되지 않는 그룹과 5가지 농도에 따른 나노물질에 노출되는 그룹(FNW $10{\mu}g/ml$, $100{\mu}g/ml$, $500{\mu}g/ml$과 FNW-Ag복합체 $10{\mu}g/ml$, $50{\mu}g/ml$)으로 나누어 실험하였다. 그 결과, FNW-Ag복합체 $50{\mu}g/ml$농도에 노출된 유생들을 제외하고는 평소 활동량에는 차이가 없었지만, FNW $10{\mu}g/ml$농도에 노출된 유생들을 제외하고는 모두 포식자인식 반응에 따른 활동변화에서는 통계적으로 유의한 차이가 나타났다. 즉, 나노물질노출 유무는 평소 움직임에는 영향을 주지 않지만, 행동학적 이해를 바탕으로 한 분석결과 포식자회피반응에 영향을 준다는 것을 알 수 있었다. 따라서 생물을 대상으로 하는 독성평가연구에 행동학적 분석이 이루어져야 할 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.71-77
• /
• 2012

Cellulose nanowhisker (CNW) isolated from hardwood bleached kraft pulp (HW-BKP) using sulfuric acid hydrolysis was suspended in polyvinyl alcohol (PVA) and electrospun into composites nanofibers. Transmission electron microscopy (TEM) revealed the CNW to be rod-like, approximately of $16.1{\pm}4.6$ nm wide and $194{\pm}61$ nm long, providing an aspect ratio of about 12, with a particle size distribution range of $662.2{\pm}301.2$ nm. Uniform and high quality CNW/PVA composite nanofibers were successfully manufactured by the electrospinning method. As the CNW loading increases, the viscosity of CNW/PVA solutions shows a minimum at 1% CNW level which subsequently results in the smallest diameter (193 nm) of electrospun nanofibers. The average diameter of the nanofibers increased up to 284 nm with increasing CNW loading. These results suggest that the electrospinning method provides a great potential of manufacturing consistent and reliable nanofibers from CNW/PVA solution for the formation of scaffolds with potentials in future application.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.144-144
• /
• 2003

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.106-109
• /
• 2012

A low power methane gas sensor with microheater was fabricated by silicon bulk micromachining technology. In order to heat up the sensing layer to operating temperature, a platinum (Pt) micro heater was embedded in the gas sensor. The line width and gap of the microheater was 20 ${\mu}m$ and 4.5 ${\mu}m$, respectively. Zinc oxide (ZnO) nanowhisker arrays were grown on a sensor from a ZnO seed layer using a hydrothermal method. A 200 ml aqueous solution of 0.1 mol zinc nitrate hexahydrate, 0.1 mol hexamethylenetetramine, and 0.02 mol polyethylenimine was used for growing ZnO nanowhiskers. Temperature distribution of the sensor was analyzed by infrared thermal camera. The optimum temperature for highest sensitivity was found to be $250^{\circ}C$ although relatively high (64%) sensitivity was obtained even at as low a temperature as $150^{\circ}C$. The power consumption was 72 mW at $250^{\circ}C$, and only 25 mW at $150^{\circ}C$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.149-149
• /
• 2016

Ceramic is widely known material due to its outstanding mechanical property. Besides, Zirconia(ZrO2) has a low thermal conductivity so it is advantage in a heat insulation. Because of these superior properties, ZrO2 is attracted to many fields using ultra high temperature for example vehicle engines, aerospace industry, turbine, nuclear system and so on. However brittle fracture is a disadvantage of the ZrO2. In order to overcome this problem, we can make the ceramic materials to the forms of ceramic nanoparticles, ceramic nanowhiskers and these forms can be used to an agent of composite materials. In this work, we selected Au catalyzed Vapor-Liquid-Solid mechanism to synthesize ZrO2 nanowhiskers. The ZrO2 whiskers are grown through Hot-wall Chemical Vapor Deposition(Hot wall CVD) using ZrCl4 as a powder source and Au film as a catalyst. This Hot wall CVD method is known to comparatively cost effective. The synthesis condition is a temperature of $1100^{\circ}C$, a pressure of 760torr(1atm) and carrier gas(Ar) flow of 500sccm. To observe the morphology of ZrO2 scanning electron microscopy is used and to identify the crystal structure x-ray diffraction is used.

• 센서학회지
• /
• 제19권6호
• /
• pp.462-468
• /
• 2010

A low power gas sensor with microheater was fabricated by MEMS technology. In order to heat up the gas sensing material to a operating temperature, a platinum(Pt) micro heater was built on to the micromachined Si substrate. The width and gap of microheater were $20\;{\mu}m$ and $4.5\;{\mu}m$, respectively. ZnO nanowhisker arrays were fabricated on a sensor device by hydrothermal method. The sensor device was deposited with ZnO seeds using PLD systems. A 200 ml aqueous solution of 0.1 mol zinc nitrate hexahydrate, 0.1 mol hexamethylenetetramine, and 0.02 mol polyethylenimine was used for growthing ZnO nanowhiskers. The power consumption to heat up the gas sensor to a operating temperature was measured and temperature distribution of sensor was analyzed by a Infrared Thermal Camera. The optimum temperature for highest sensitivity was found to be $250^{\circ}C$ although relatively high(64 %) sensitivity was obtained even at as low as $150^{\circ}C$. The power consumption was 72 mW at $250^{\circ}C$ and was only 25 mW at $150^{\circ}C$.

• Elastomers and Composites
• /
• 제45권1호
• /
• pp.51-57
• /
• 2010

본 연구에서는 친환경적인 특징을 가지면서도 우수한 기계적 특성을 가지고 있어 고분자 복합재료의 보강제로 주목 받고 있는 Cellulose nanowhisker (CNW) 를 염산 혹은 황산을 사용한 산가수분해 방법을 이용하여 Microcrystalline cellulose (MCC) 로 부터 추출하였다. 염산 혹은 황산을 사용하여 추출된 CNW는 직경이 20 에서 30nm 정도였고, 길이가 200 에서 300 nm 로써, 형상학적 측면에서 유사한 특성을 가지는 것을 확인하였다. 또한 전해질 용액의 전기전도도를 이용한 적정 (conductometric titration) 결과 황산을 이용하여 제조되어진 CNW의 경우, 셀룰로오스 표면의 sulfate group 에 의해 나타나는 표면전하 값이 각각 140, 197.78 mmol/kg으로 나타났으며, 염산을 이용하여 제조되어진 CNW 의 경우 셀룰로오스 표면에 약한 전하 값을 가져 표면전하 값을 구할 수 없었다. 황산을 이용하여 추출된 CNW의 열중량 분석 결과 염산을 이용하여 추출된 CNW와 비교하여 열분해 온도가 급격히 감소하는 것을 확인할 수 있었으며, Broido's method를 이용하여 정의 되어진 열분해 거동에 대한 활성화 에너지 역시 상대적으로 낮음을 확인할 수 있었다.