• Journal of Korean Physical Therapy Science
• /
• v.9 no.1
• /
• pp.167-175
• /
• 2002

Functional Electrical Stimulation is the clinical application of a small electric current to the intact nerves of the body, in order to trigger a muscle contraction. This contraction is then incorporated into a functional activity, for example walling. A clear distinction needs to be made between therapeutic stimulation and functional stimulation. The former being of an exercise orientation, where one would relax while the stimulation works on its own. Functional electrical stimulation on the other hand, incorporates this elicited muscle movement into an everyday activity, like standing, walking, reaching out etc. But recently, New method used to FES which updated electrode insult in muscle and small nerve branch. A lot of new research build up many countries such as England, USA, Japan, Spain, Canada. So I had been write this paper for introduce new FES method, and I hope to more enhanced motivation of therapist for the functional electric stimulation.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1005-1006
• /
• 2008

A mechanical or electrical stimulation to the muscle always produces special phenomena, as silent period. Generally, a mechanical stimulation is followed by a single silent period, and an electrical stimulation is followed by multiple silent periods. In this paper, we propose a new algorithm for determining the duration of the silent period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1218-1223
• /
• 2003

The effects of type (high and low voltages) and time (3, 40 and 60 min postmortem) of stimulation on drip loss and meat color at 24 h post-mortem were determined on M. longissimus dorsi of 38 crossbred steers and heifers. In addition, the effect of pH early postmortem (70 min postmortem) on the rate and extend of meat tenderization was examined. Either high or low voltage stimulation at 3 min showed a tendency for faster pH decline (p=0.052) and higher drip loss (p=0.08), and improved the color dimensions of L*, a* and b* (p<0.01), compared to stimulation at 40 min. This was equivalent to approximately one unit of an AUSMEAT color chip. On the other hand, although there were significant differences in pH decline between high voltage stimulation at 40 and 60 min, and between low voltage stimulation at 40 min and control sides, drip loss and meat color did not differ significantly (p>0.05). The results suggested that early application of stimulation, regardless of type of stimulation, improved overall meat color at 24 h postmortem through its effect on faster glycolysing rate. However, if the pH decline was moderate, the benefit of electrical stimulation on meat color was not apparent. An intermediate pH decline resulted in the lowest shear force. Due to differential ageing rates the optimum pH at 70 min postmortem increased with ageing time from 5.96, 6.07, 6.12 and 6.14 for 1, 3, 7 and 14 days postmortem, respectively. This implied that a small difference in the rate of pH decline was important, especially carcasses stimulated for very early postmortem, and the optimum rate of pH decline varied with intended ageing period. The study suggests that the beneficial or adverse effects of electrical stimulation on drip loss, meat color and tenderness is determined by the rate of pH decline, rather than by stimulation treatment and time of application per se.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.70-72
• /
• 2018

We propose a microwave signal generation system for brain stimulation. The existing brain stimulation system uses a signal of several tens of kHz, and the magnetic field distribution is wide. Microwave is used to locally limit the distribution of the electromagnetic field and to change the action potential of the cell with less power. The switch modulates the microwave signal to obtain a pulse envelope. The action potential of the cell can be controlled to the excitation/inhibition state by adjusting the repetition frequency. These results are confirmed by measuring the cell potential of the mouse brain.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.234-239
• /
• 2011

Transcranial magnetic stimulation utilizes the method of controlling applied time and changing pulse by output pulse through power density control for diagnosis purposes. Transcranial magnetic stimulation can also be used in cases where diagnosis and treatment are difficult since output pulse shape can be changed. As intensity, pulse range, and pulse shape of the stimulation pulse must be changed according to lesion, the existing sine wave-shaped stimulation treatment pulse poses limitations in achieving various treatments and diagnosis. This study actualized a new method of transcranial magnetic stimulation that applies a 3 Stage 2 Switch( power semiconductor 2EA) for controlling pulse repetition rate by achieving numerous switching control of stimulation coil. Intensity, pulse range, and pulse shape of output can be freely changed to transform various treatment pulses in order to overcome limitations in stimulation treatment presented by the previous sine wave pulse shape. The method of freely changing pulse range by using 3 Stage 2 Switch discharge method is proposed. Pulse shape, composed of various pulse ranges, was created by grafting PFN (Pulsed Forming Network) through AVR AT80S8535 one-chip microprocessor technology, and application in transcranial magnetic stimulation was achieved to study the output characteristics of stimulation treatment pulse according to delaying time of the trigger signal applied in section switch.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.409-413
• /
• 2022

Objective: This study aims to compare the range of motion of the joints by applying the contraction and relaxation techniques used in manual therapy as electrical stimulation treatment. Based on this, we would like to propose the possibility of using motor nerve electrical stimulation therapy for musculoskeletal physical therapy. Design: Single-arm interventional study Methods: Active and passive straight leg raising tests were performed on 20 healthy men and women in their 20s to measure the angle of hip joint flexion. Then, the electrical stimulation time was set to 10 seconds and 5 seconds of rest, and motor nerve electrical stimulation of 1 Hz was applied with the maximum strength that could withstand the hamstring muscles for 10 minutes. After electrical stimulation, straight leg raising tests again to confirm the range of motion of the hip joint flexion. Results: As a result of this study, it was confirmed that the joint range of motion was significantly improved for both active and passive straight leg raising tests after application of motor nerve electrical stimulation(p<.05). Conclusions: With a strong electrical stimulation treatment of 1 Hz, the effect similar to the contraction and relaxation technique used in manual therapy was confirmed through the joint range of motion. In the future, motor nerve electrical stimulation therapy can be used for musculoskeletal physical therapy to provide a new approach for patients with reduced pain and joint range of motion due to muscle tension.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1690-1691
• /
• 2008

Micro cell stimulation device is interested in many researchers because it has several advantages such as saving time and reagents. We introduce new micro-bioreactor using micro bead and conduct cell stimulation experiments to verify effective time because cell have operated by cell-cycle (G1, S, G2, and M phase). Micro-bioreactor was made by soft lithography and CAPE (calf pulmonary artery endothelial cell) was cultured in PDMS (polydimethylsiloxane) micro device for 12 hour and cell starvation process was performed for 24 hours. Micro glass beads were rolled only by slating device every hour during 15 hour because of minimizing other stimulation force like flow and pressure. The result represents that cells under exposed under micro bead stimulation show higher growth rate than normal condition and earlier and later stimulation time are more effective.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.9-15
• /
• 2010

In this study, we have been proposed the new type of a transcranial magnetic stimulation adopted a variable voltage capacitor with Cockcroft-Walton circuit and constant-frequency current resonant half-bridge inverter. This a transcranial magnetic stimulation has some merits compared with the conventional one. First, it doesn't require the high voltage transformer. And second, it has less switching losses, compact size and capability in adjusting the transcranial magnetic stimulation output energy precisely. In this paper, we have performed the output characteristics of a transcranial magnetic stimulation system which is well known as magnetic stimulation. The tested results are described as a function of pulse repetition rate and switching numbers of the half-bridge inverter.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.4
• /
• pp.77-82
• /
• 2016

Purpose: The purpose of this study was to investigate the therapeutic effect of non-invasive vagus nerve stimulation by transcutaneous electrical nerve stimulation application on the autonomic nervous system of human body. Methods: Participants were seventeen healthy adults. Standard deviation of all normal N-N intervals(SDNN), root mean square of successive differences(RMSSD), low frequency(LF), high frequency(HF) were compared in pre and post Mean values after intervention. Data were analyzed in Wilcoxon's signed-ranks test. Results: The results of this study is that sistolic blood pressure and pulse rate decreased mean value after non-invasive vagus nerve stimulation by transcutaneous electrical nerve stimulation. High frequency, low frequency, SDNN, RMSSD increased mean value in heart rate variability after intervention. But that is not significant except for SDNN. Conclusion: Non-invasive vagus stimulation by transcutaneous electrical nerve stimulation effect on parasympathetic nerve stimulation, and then it might be effective method for autonomic nerve balance control.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.287-293
• /
• 2002

For non-contact nerve stimulations using time varying magnetic field, high amplitude current pulses have to be applied to a magnetic nerve stimulation coil. To increase the magnetic stimulation frequency we have to increase both power supply capacity and cooling capacity of the magnetic nerve stimulator. To alleviate these problems. we propose a new magnetic nerve stimulation coil design methods. Utilizing magnetic mirror effect of a ferro-magnetic plate attached to a magnetic stimulation coil. we have improved efficiency of the stimulation coil. We have analyzed magnetic mirror effect for various kinds of stimulation coils using the finite element method, and we present experimental results obtained with several kinds of stimulation coils.