• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.1-10
• /
• 2008

Recently, the Seoul Metropolitan Government (SMG) has initiated several urban redevelopment projects to revitalize the downtown well equipped for transit oriented development (TOD). Since, TOD should incur higher density development in our context, it has negative impacts on travel patterns, congestion, and urban environmental quality. The purpose of this study is to develop new transportation service index which can facilitate higher density TOD. This study includes relevant foreign case studies, the development of multimodal transportation index, and the impact analysis of TOD when it is applied in the downtown Seoul. In chapter III, it developed a so-called ITLOS, new multimodal transportation service index which shows the possibility of accommodating further development by integrating roadway service index with public transportation service index. The study sets ten policy scenarios by varying densities, and run the Seoul Congestion Management Model (SECOMM) to estimate the sustainable transportation impacts of TOD in the downtown. Travel speed index that only represents the availability of road capacity for development reveal that higher density development in the downtown can deteriorate traffic congestion while improving region-wide transportation level of service in Seoul. Also, it is proved that higher density development is more feasible when using ITLOS as the index because it considers not only available road capacity but subway capacity in the analysis area.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.75-84
• /
• 2012

PURPOSES : This paper aims to improve the evaluation method of the Level of Service(LOS) for urban streets presented by the current Korean Highway Capacity Manual(KHCM) and suggest its utilization plan as a part of the methods to evaluate the sustainability of a transportation policy. METHODS : This paper carried out a research in 3 steps to develop a new evaluation method. First of all, this paper reviewed the previous studies related to the LOS of urban streets and the socially requested items for a sustainable transportation system. Then this paper derived an index and weight through expert questions to select an evaluation index. Lastly, this paper compared the results according to the existing evaluation methods with the new evaluation methods through case studies. This paper used an Analytic Hierarchy Process(AHP) for importance analysis and weight selection between new evaluation items and indices, and applied a Grey System Theory(GST) for a synthetic and integrated evaluation between the selected evaluation indices. RESULTS : As a result of evaluating the LOS according to the existing evaluation methods and the integrated evaluation methods using a GST through case studies, it was analyzed that new methods' results are less than or equal to the existing evaluation methods; and as a result of applying a weight between evaluation indices according to AHP, it was noticed that the total score seems to rise more when the LOS in the existing evaluation is calculated lower. It was analyzed that the LOS calculated by reflecting the newly established evaluation items and the importance between indices in this study has difference from the LOS of the existing urban streets. CONCLUSIONS : It is expected that this evaluation method can diagnose the current conditions when establishing a future sustainable traffic system and can be used for the measurement of the sustainability effects of the improvement plans and so on.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.95-106
• /
• 2012

The railway service in the Seoul metropolitan area is facing variety of l changes such as extension of service coverage, new construction, and introduction of express service which in turn causes changes on demands. The demand affects train operation characteristics (frequency of service, train formation) as well as on the congestion rate which is one of the major evaluation index in metropolitan area user service. For the efficient operation of the train, the relationship among the minimization of fleet number, operating cost, and service level has been analyzed. Using the Powersim, which is a system dynamics (System Dynamics) simulation program for realizing optimized simulation for train-formation, this paper identified that some stations of Gyeong-bu line exceeded limit congestion rate(150%) of a fleet already that means it is best to maintain current condition of the line; however, the Gyeong-in line and the Gwa-chon line showed no excess of the limit congestion rate so that it is possible to reduce 2-4 fleets of train for efficient operation. In addition, in case of Jang-hang line between Cheon-an and Sin-chang, a train consisting of 10 fleets provides services which is same formation of train for Gyeong-bu line. This study proved that the congestion rate will not rise greatly with only 4 fleets of a train for the service in Jang-hang line, and it is considered that a study for shuttle service between Cheon-an and Sin-chang is necessary.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.85-95
• /
• 2009

Congestion on expressways is increasing in spite of continuous road construction. In enlargement of expressway capacity to lessen congestion, a long period is needed and in the case of traffic congestion, it would be impossible to avoid long periods of traffic congestion. So, it is necessary to cope with traffic congestion through continuous traffic condition monitoring, analysis of the causes of congestion and the development of alternatives before traffic conditions worsen. A congestion index that can express traffic operating conditions measurably is needed to monitor those conditions. Thus, in this research, a new congestion index, the Traffic Condition Index (TCI), is developed. TCI is able to evaluate roads that have different grades (or design speeds) and to judge traffic condition as good, fair and poor (congested). In addition, TCI has merits in that it can strengthen the function of existing Freeway Traffic Management Systems (FTMS) and can be applied to congestion management easily: TCI calculates congestion intensity and severity using data obtained from existing FTMS. In order to validate TCI, it was applied to the Kyungbu Expressway and the Seohaean Expressway. As a result, TCI shows a good performance in the aspect of applicability and ability of presentation of traffic conditions compared with travel speed and Travel Time Index (TTI).

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.35-46
• /
• 2009

This paper presents an evaluation index for the supply levels of pedestrian facilities in residential area planning. The pedestrian facility supply levels reveal the quality of a residential area, and can be associated with the resident living standards and satisfaction, pedestrian safety levels, and the effectiveness of the construction cost. This research conducted multifaceted procedures for the index development, and these procedures start first by identifying dominant influencing factors on pedestrian travel demand by reviewing the final reports of site planning in more than eight already-completed residential development sites. Second, based on the Space Syntax model, which was initially developed in the UK by establishing statistical relationships among an integration index, population size (persons/day), and the total development area, this research formulated a set of pedestrian demand estimation models. Then these models were utilized in forming a pedestrian facility supply index by integrating the new models and their results with the available accepted practice in the residential planning sector. This was necessary because planners want to understand the total supply level of pedestrian facilities in a residential area during the initial design stage. Finally, to test the model validity in satisfying pedestrian satisfaction, the research included a resident satisfaction interview, and it was revealed that the evaluation index developed in this research could provide planners and engineers with more promising results. It is therefore anticipated that this research can be of service when designing pedestrian facilities in future residential area planning and design activities.

• Journal of Korean Port Research
• /
• v.2 no.1
• /
• pp.29-73
• /
• 1988

Since the middle of 1950's when sea transportation service by container ship was established, containerization has been rapidly spread over the world with realization of intermodalism, and becomes an index of economy growth of a country. Our country has established Pusan Container Terminal at Pusan harbour in 1978 in step with worldwide trend of containerization, and is constructing New Container Terminal at Pusan outharbour which will be completed in 1990. This paper aims to make a quantitative analysis of the Pusan Container Terminal system through the computer simulation, especially focusing on its subsystems such as ship stevedoring system, storage system and transfer system. First, the capacity of various subsystems are evaluated and it is checked whether the current operation is being performed effectively through the computer simulation. Secondly, the suggestion is presented to improve the operation by considering the throughput that Pusan Container Terminal will have to accept until 1990, when New Container Terminal will be completed. The results are as follows ; 1) As the inefficiency is due to the imbalance between various subsystems at Pusan Container Terminal on the basis of about 1.2 million TEU of container traffic, transfer equipment level must be up to 33% for transfer crane, and free period must be reduced into 4/5 days for export/import. 2) On the basis of about 1.4 million TEU of container traffic, transfer equipment level must be up to $12\%$ for gantry crane, $11\%$ for straddle carrier and $66\%$ for transfer crane, and free period must be reduced into 3/4 days for export/import. 3) On the basis of about 1.7 million TEU of container traffic, transfer equipment level must be up to $25\%$ for gantry crane, $28\%$ for straddle carrier and $100\%$ for transfer crane, and free period must be reduced into 3/4 days for export/import. 4) On the basis of about 2 million TEU of container traffic, transfer equipment level must be up to $25\%$ for gantry crane, $30\%$ for straddle carrier and $110\%$ for transfer crane, and free period must be reduced into 2/3 days for export/import, and it is necessary to enlarge storage yard.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.4
• /
• pp.71-102
• /
• 2007

There were many comprehensive analyses conducted within the existing research activities wherein factors affecting technology progress including investment in R&D vis-${\Box}$-vis their influences act as the determinants of TFP. Note, however, that there were few comprehensive analysis in the industrial research performed regarding the impact of the economy of scale as it affects TFP; most of these research studies dealt with the analysis of the non -parametric Malmquist productivity index or used the stochastic frontier production function models. No comprehensive analysis on the impacts of individual independent variables affecting TFP was performed. Therefore, this study obtained the TFP increase rate of each industry by analyzing the factors of the existing growth accounting equation and comprehensively analyzed the TFP determinants by constructing a comprehensive analysis model considering the investment in R&D and economy of scale (smallness by industry) as the influencers of TFP by industry. First, for the TFP increase rate of the 15 industries as a whole, the annual average increase rate for 1993${\sim}$ 1997 was approximately 3.8% only; during 1999${\sim}$ 2000 following the foreign exchange crisis, however, the annual increase rate rose to approximately 7.8%. By industry, the annual average increase rate of TFP between 1993 and 2000 stood at 11.6%, the highest in the electrical and electronic equipment manufacturing business and IT manufacturing sector. In contrast, a -0.4% increase rate was recorded in the furniture and other product manufacturing sectors. In the case of the service industry, the TFP increase rate was 7.3% in the transportation, warehousing, and communication sectors. This is much higher than the 2.9% posted in the electricity, water, and gas sectors and -3.7% recorded in the wholesale, food, and hotel businesses. The results of the comprehensive analysis conducted on the determinants of TFP showed that the correlations between R&D and TFP in general were positive (+) correlations whose significance has yet to be validated; in the model where the self-employed and unpaid family workers were used as proxy variables indicating the smallness of industry out of the total number of workers, however, significant negative (-) correlations were noted. On the other hand, the estimation factors of variables surrogating the smallness of scale in each industry showed that a consistently high "smallness of scale" in an industry means a decrease in the increase rate of TFP in the same industry.